CNS 10605-1983 Condenser Type Spot Welding Machines《电容式点焊机》.pdf

相关资源

CNS 10606-1983 Welding Energy of Condenser Type Spot Welding Machines《电容式点焊机之焊接能力》.pdf

JIS C9321-1991 电容器放电式点焊机.pdf

JB 5249-1991 移动式点焊机.pdf

JB T 5249-1991 移动式点焊机.pdf

GB T 25443-2010 移动式点焊机.pdf

CNS 4618-1995 Water - Cooled Secondary Cables for Portable Spot Welding Machine《手提型点焊机用水冷式延长电缆》.pdf

GOST 14111-1990 Straight electrodes for resistance spot welding Types and demensions《接触式点焊机用直焊条 技术条件》.pdf

CNS 4619-1995 Method of Test for Water - Cooled Secondary Cables for Portable Spot Welding Machines《手提型点焊机用水冷式延长电缆检验法》.pdf

GOST 27387-1987 Industrial robots for contact spot welding Basic parameters and dimensions《接触式点焊机用工业机器人 基本参数和尺寸》.pdf

猜你喜欢

CSN ISO 7741-1994 Instruments for surgery - Scissors and shears - General requirements and test methods《外科用仪器 剪刀和剪力 一般要求和试验方法》.pdf

CSN ISO 7752-5-1994 Lifting appliances - Controls - Layout and characteristics Part 5 Overhead travelling cranes and portal bridge cranes《起重设备 控制装置 设计及特点 第5部分：桥式起重机及门桥式起重机》.pdf

CSN ISO 7764-1993 Iron ores Preparation of predried test samples for chemical analysis《铁矿石 化学分析用预干燥试样的制备》.pdf

CSN ISO 7774-1993 Road vehicles Compression ignition engines Single fuel filters with horizontal flange and centre bolt fixing Mounting and connecting dimensions《道路车辆 压燃式发动机 带水平法兰和.pdf

CSN ISO 7796-1993 Skis Geometry Measuring conditions《滑雪撬 表面形状 测量条件》.pdf

CSN ISO 7797-1993 Cross-country skis Determination of breaking load and deflection at break with quasistatic load《越野滑雪板 准静态载荷断裂时断裂负载和弯曲值的测定》.pdf

CSN ISO 7798-1993 Cross-country skis Determination of fatigue indexes Cyclic loading test《越野滑雪板 疲劳指数测定 循环载荷试验》.pdf

CSN ISO 7799-1994 Metallic materials Sheet and strip 3 mm or less Reverse bend test《金属材料 3毫米或以下的板和条 反向弯曲试验》.pdf

CSN ISO 7801-1994 Metallic materials Wire Reverse bend test《金属材料 电线 反向弯曲试验》.pdf