CNS 3875-1991 Method of Test for the Chain of Bicycles《自行车（脚踏车）链条检验法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

HB 4594-1992 套式立铣刀槽铣刀用样板和校对样板.检测HB 4593-92槽铣刀用.pdf

HB 4595-1992 加工轻合金套式立铣刀用槽铣刀.D=63～80mm.pdf

HB 4596-1992 加工轻合金套式立铣刀槽铣刀用样板和校对样板.检测HB 4595-92槽铣刀用.pdf

HB 4597-1992 加工轻合金圆柱形铣刀用槽铣刀.D=71～80mm.pdf

HB 4598-1992 加工轻合金圆柱形铣刀槽铣刀用样板和校对样板.检测HB 4587～92槽铣刀用.pdf

HB 4599-1992 镶齿铣刀5°槽用槽铣刀.D=100～125mm.pdf

HB 4600-1992 加工铝合金扩孔钻用槽铣刀.D=35～63mm.pdf

HB 4601-1992 加工铝合金扩孔钻槽铣刀用样板和校对样板.检测HB 4600-92槽铣刀用.pdf

HB 4602-1992 二齿普通直柄立铣刀.d=3～20mm.pdf