CNS 4655-1978 Hexagon Set Screws with Half Dog Point and Cone End《六角头短柱锥形端固定螺钉》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

STAS 8968 6-1989 Driving parts for hand-operated square drive socket wrenches REVERSIBLE HANDLE RATCHET Dimensions《手工操作方形驱动套筒扳手的驱动部件可逆拉手棘轮 尺寸 》.pdf

STAS 8968 7-1989 Driving parts for hand operated square drive socket wrenches RATCHET HANDLE Dimensions《手工操作方形驱动套筒扳手的驱动部件棘轮手柄 尺寸 》.pdf

STAS 8969 1-1979 Connecting parts SOUARE COUPLERS Dimensions《连接零件 方形接头 尺寸 》.pdf

STAS 8969 2-1989 Attachements for hand operated square drive socket wrenches ADAPTER SOCKET WRENCH Dimensions《人工操作方形驱动套筒扳手的附属装置 适配器套筒扳头尺寸 》.pdf

STAS 8969 3-1979 Connecting parts EXTENSION BAR Dimensions《连接部分 加长杆 尺寸 》.pdf

STAS 8969 4-1989 Attachements for hand operated square drive socket wrenches UNIVERSAL JOINT SQUARE DRIVE Dimensions《人手操作方形驱动套筒扳手的附属装置 万向连接方形驱动 尺寸 》.pdf

STAS 8970-1971 CONVERSION OF TOLERANCED DIMENSIONS FROM INCHES INTO MILLIMETRES AND FROM MILLIMETRES INTO INCHES《公差尺寸从英寸到毫米以及从毫米到英寸的转化 》.pdf

STAS 8971-1987 Metals soldering HARD SOLDERS WITH SILVER CONTENT《金属钎焊 含有银含量的硬焊料 》.pdf

STAS 8972 2-1981 Hydrometry LIQUID FLOOR MEASUREMENT IN OPEN CHANNELS Velocity-area methods《水文测验 明渠中液体的地板测量 速度面积法 》.pdf