CNS 6996-1996 Crowning Bolts《突面插闩》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM A763-1993(2009) Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels《铁素体不锈钢晶间腐蚀敏感性检测的标准作法》.pdf

ASTM A763-2014 Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels《铁素体不锈钢晶间腐蚀敏感性检测的标准实施规程》.pdf

ASTM A763-2015 Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels《检测铁素体不锈钢晶间腐蚀敏感性的标准实践规程》.pdf

ASTM A764-2007 Standard Specification for Metallic Coated Carbon Steel Wire Coated at Size and Drawn to Size for Mechanical Springs《机械弹簧用按尺寸镀锌和冷拉镀锌碳素钢丝的标准规范》.pdf

ASTM A764-2007(2012) Standard Specification for Metallic Coated Carbon Steel Wire Coated at Size and Drawn to Size for Mechanical Springs《机械弹簧用按尺寸镀锌和冷拉镀锌碳素钢丝的标准规格》.pdf

ASTM A764-2007(2017) Standard Specification for Metallic Coated Carbon Steel Wire Coated at Size and Drawn to Size for Mechanical Springs《机械弹簧用冷拉镀锌和按成品尺寸镀锌的碳素钢丝的标准规格》.pdf

ASTM A765 A765M-2007 Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements《具有强制性韧性要求的碳素钢及低合金钢压力容器部件锻件.pdf

ASTM A765 A765M-2007(2012) Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements《具有强制性韧性要求的碳素钢及低合金钢压力.pdf

ASTM A765 A765M-2007(2017) Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements《具有强制性韧性要求的碳素钢及低合金钢压力.pdf