CNS 7186-1984 Addendum Modification of Cylindrical Gears《圆柱齿轮之齿廓移位》.pdf

相关资源

JB T 9050.2-1999 圆柱齿轮减速器 接触斑点测定方法.pdf

JB T 9050.3-1999 圆柱齿轮减速器 加载试验方法.pdf

CB- 3299-1987 船舶渐开线圆柱齿轮承载能力计算方法.pdf

HG T 3139.12-2001 釜用立式减速机 KJ系列可移式圆柱齿轮减速机.pdf

HG T 3139.3-2001 釜用立式减速机 LC系列圆柱齿轮减速机.pdf

JB T 3989.5-2014 渐开线圆柱齿轮磨齿机 第5部分：大平面砂轮磨齿机 精度检验.pdf

FZ T 90032-1992 纺织机械渐开线圆柱齿轮精度.pdf

FZ T 90047-1993 圆柱齿轮结构型式及尺寸.pdf

FZ T 90077-1995 纺织机械渐开线圆柱齿轮承载能力简化计算方法.pdf

FZ T 91018-1996 纺织机械渐开线圆柱齿轮加工工艺规范.pdf

猜你喜欢

ASTM D7577-2012 1875 Standard Test Method for Determining the Accelerated Iron Corrosion Rating of Denatured Fuel Ethanol and Ethanol Fuel Blends《测定变性燃料乙醇和乙醇混合燃料的加速铁腐蚀等级的标准试验方法》.pdf

ASTM D7577-2012(2016) 2301 Standard Test Method for Determining the Accelerated Iron Corrosion Rating of Denatured Fuel Ethanol and Ethanol Fuel Blends《测定变性燃料乙醇和乙醇混合燃料加速铁腐蚀级别的标准试验方.pdf

ASTM D7578-2010 9375 Standard Guide for Calibration Requirements for Elemental Analysis of Petroleum Products and Lubricants《石油产品和润滑剂元素分析的校准要求的标准指南》.pdf

ASTM D7578-2010e1 6250 Standard Guide for Calibration Requirements for Elemental Analysis of Petroleum Products and Lubricants《石油产品和润滑剂元素分析所需的校准要求的标准指南》.pdf

ASTM D7578-2015 red 9301 Standard Guide for Calibration Requirements for Elemental Analysis of Petroleum Products and Lubricants《石油产品和润滑剂元素分析校准要求的标准指南》.pdf

ASTM D7578-2018 0625 Standard Guide for Calibration Requirements for Elemental Analysis of Petroleum Products and Lubricants.pdf

ASTM D7579-2009 1875 Standard Test Method for Pyrolysis Solids Content in Pyrolysis Liquids by Filtration of Solids in Methanol《甲醇固体过滤法热解液体产物中热解固体含量的标准试验方法》.pdf

ASTM D7579-2009(2013) 8750 Standard Test Method for Pyrolysis Solids Content in Pyrolysis Liquids by Filtration of Solids in Methanol《采用甲醇固体过滤法的热解液体中热解固体含量的标准试验方法》.pdf

ASTM D7580 D7580M-2009 0000 Standard Test Method for Rotary Stretch Wrapper Method for Determining the Readability of Passive RFID Transponders on Homogenous Palletized or Unitized.pdf