CNS 7356-1981 Small Wooden Reel for Electric Wires《电线用木制小型卷轴》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM E11-2017 5917 Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves《钢丝网试验筛布和试验筛的标准规格》.pdf

ASTM E110-1982(2002) Standard Test Method for Indentation Hardness of Metallic Materials by Portable Hardness Testers《用轻型硬度测试仪测定金属材料压痕硬度的试验方法》.pdf

ASTM E110-2010 5000 Standard Test Method for Indentation Hardness of Metallic Materials by Portable Hardness Testers《使用携带式硬度计测定金属材料的压痕硬度的标准试验方法》.pdf

ASTM E110-2014 6674 Standard Test Method for Rockwell and Brinell Hardness of Metallic Materials by Portable Hardness Testers《使用便携式硬度测试仪测定金属材料罗克韦尔硬度和布氏硬度的标准试验方法》.pdf

ASTM E111-2004 8125 Standard Test Method for Youngs Modulus Tangent Modulus and Chord Modulus《杨氏弹性模量、正切模量和弦切模量的标准试验方法》.pdf

ASTM E111-2004(2010) 1875 Standard Test Method for Youngs Modulus Tangent Modulus and Chord Modulus《杨氏模量 正切模量 和弦向模量的标准试验方法》.pdf

ASTM E111-2017 3125 Standard Test Method for Young&x2019 s Modulus Tangent Modulus and Chord Modulus《扬氏模量 切线模量和弦线模量的标准试验方法》.pdf

ASTM E112-1996(2004)e2 Standard Test Methods for Determining Average Grain Size《测定平均粒度的标准试验方法》.pdf

ASTM E112-2010 4375 Standard Test Methods for Determining Average Grain Size《测定平均粒度的标准试验方法》.pdf