CNS 8149-1981 Apparatus for Testing of Colour Fastness to Washing《耐洗染色坚牢度试验机》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

CSN 22 1320-1955 Drills with cylindrical shank and with sintered carbide cutting tips《钻头与圆柱柄和硬质合金板刀刃板》.pdf

CSN 22 1330-1955 Drills with conical shank and sintered carbide cutting tip《圆锥柄 硬质合金板刀刃板》.pdf

CSN 22 1371-1955 Machine reamers with conical shank and sintered carbide cutting tip《带圆锥柄的铰刀机和硬质合金板刀刃板》.pdf

CSN 22 1402-1976 Reamers Cylindrical reamers Technical rules《圆柱形钻孔器规范》.pdf

CSN 22 1403-1976 Reamer drills and reamers Terminology《钻孔器钻头及铰刀 命名》.pdf

CSN 22 1405-1980 Cylindrical reamers Diameter tolerances《圆柱形铰刀 公差》.pdf

CSN 22 1411-1981 Reamer drills with taper shank Basic dimensions《带锥柄的空心钻 基本尺寸》.pdf

CSN 22 1414-1986 Reamer drills Shell drills Basic dimensions《筒形钻 基本尺寸》.pdf

CSN 22 1420-1980 Cylindrical hand reamers Basic dimensions《手铰刀基本尺寸》.pdf