CNS 9610-1998 Heat-resisting plates and sheets《耐热钢板及钢片》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AGMA 915-2-A05-2005 Inspection Practices - Part 2 Cylindrical Gears - Radial Measurements《检查规范.第2部分 圆柱齿轮.径向测量[替代 AGMA ISO 10064-2]》.pdf

AGMA 915-3-A99-1999 Inspection Practices - Gear Blanks Shaft Center Distance and Parallelism《齿轮毛坯 轴中心距和平行距的检验规定》.pdf

AGMA 917-B97-1997 Design Manual for Parallel Shaft Fine-Pitch Gearing《平行轴小模数齿轮装置的设计手册[替代 AGMA 370.01]》.pdf

AGMA 918-A93-1993 Summary of Numerical Examples Demonstrating the Procedures for Calculating Geometry Factors for Spur and Helical Gears《直齿轮和螺旋齿轮用计算几何系数的数字示例演示程序摘要》.pdf

AGMA 919-1-A14-2014 Condition Monitoring and Diagnostics of Gear Units and Open Gears Part 1 - Basics.pdf

AGMA 91FTM1-1991 CNC Bevel Gear Generators and Flared Cup Formate Gear Grinding《计算机数控(CNC)锥齿轮发电机和扩口杯甲酸盐齿轮磨削》.pdf

AGMA 91FTM10-1991 Dynamic Measurements of Gear Tooth Friction and Load《齿轮齿摩擦和负荷的动态测量》.pdf

AGMA 91FTM11-1991 Initial Design of Gears Using Artificial Neural Net《用人工神经网络进行齿轮的初始设计》.pdf

AGMA 91FTM12-1991 The Combined Mesh Stiffness Characteristics of Straight and Spiral Bevel Gears《直齿伞齿轮和螺旋伞齿轮的结合啮合硬度特性》.pdf