1、February 2008Translation by DIN-Sprachendienst.English price group 4No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS
2、 85.080.10!%.ee“2116666www.din.deDDIN 476-2Trimmed sizes of paper C series,English translation of DIN 476-2:2008-02Papier-Endformate C-Reihe,Englische bersetzung von DIN 476-2:2008-02Formats finis des papiers srie C,Traduction anglaise de DIN 476-2:2008-02SupersedesDIN 476-2:1991-02www.beuth.deIn ca
3、se of doubt, the German-language original shall be considered authoritative.Document comprises 4 pages03.14 DIN 476-2:2008-02 2 A comma is used as the decimal marker. Foreword This document has been prepared by the newly formed Working Committee NA 074-00-12 AA (former name NPa 12) Papier und Papier
4、produkte fr Datenverarbeitung, Bro und Schule of the Normenausschuss Papier und Pappe (NPa) (Paper, board and pulps Standards Committee). Amendments The standard differs from DIN 476-2:1991-02 as follows: a) a printing error in clause 4 has been corrected; b) the standard has been editorially revise
5、d and restructured. Previous editions DIN 476: 1922-08, 1925-07, 1930-04, 1939-04, 1976-12 DIN 476-2: 1991-02 1 Scope This standard specifies the trimmed sizes of the C series intended for envelopes, folders, etc., for use with paper products of the A series. 2 Normative references The following ref
6、erenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. DIN EN ISO 216, Writing paper and certain classes of printed matte
7、r Trimmed sizes A and B series, and indication of machine direction 3 Structure of size classifications As specified in DIN EN ISO 216. DIN 476-2:2008-02 3 4 C series 4.1 Size progression The C series is obtained by placing the geometrical means between adjacent sizes of both the A and B series in s
8、equence (see Table 1). 4.2 Trimmed sizes Table 1 Sizes in the C series Designation C series mm C0 917 1 297 C1 648 917 C2 458 648 C3 324 458 C4 229 324 C5 162 229 C6 114 162 C7 81 114 C8 57 81 C9 40 57 C10 28 40 4.3 Tolerances Unless otherwise specified at the time of ordering, the following toleran
9、ces apply to the dimensions listed in 4.2: For dimensions up to 150 mm: 1 mm For dimensions greater than 150 mm and up to 600 mm: 1,5 mm For dimensions greater than 600 mm: 2 mm DIN 476-2:2008-02 4 Bibliography DIN 678-1, Envelopes Part 1: Sizes DIN 678-2, Envelopes Part 2: Envelopes for processing in enveloping machines, size C6 to C4
