1、ICS 23.040.10; 77.140.75Welded steel tubes for pressure purposes Technical delivery conditionsPart 2: Electric welded non-alloy and alloy steel tubeswith specified elevated temperature properties(includes Amendment A1:2005)English version of DIN EN 10217-2:2002 + A1:2005Geschweite Stahlrohre fr Druc
2、kbeanspruchungen Technische Lieferbedingungen Teil 2: Elektrischgeschweite Rohre aus unlegierten und legierten Sthlen mit festgelegten Eigenschaften bei erhhtenTemperaturen (enthlt nderung A1:2005)A comma is used as the decimal marker.National forewordThis standard has been prepared by ECISS/TC 29 S
3、teel tubes and fittings for steel tubes (Secretariat: Italy).The responsible German body involved in its preparation was the Normenausschuss Eisen und Stahl (Steeland Iron Standards Committee), Technical Committee Rohre aus warmfesten oder kaltzhen Sthlen.DIN V 17006-100 is the standard correspondin
4、g to CEN Technical Report CR 10260 referred to in clause 2of the EN.AmendmentsThis standard differs from the August 2002 edition in that it has been editorially revised.Previous editionsDIN 17177: 1979-05; DIN EN 10217-2: 2002-08.National Annex NAStandard referred to(and not included in Normative re
5、ferences and Bibliography)DIN V 17006-100 Designation systems for steel Additional symbols for steel namesDEUTSCHE NORM April 2005DIN EN 10217-2 No part of this standard may be reproduced without the prior permission ofDIN Deutsches Institut fr Normung e.V., Berlin. Beuth Verlag GmbH, 10772 Berlin,
6、Germany,has the exclusive right of sale for German Standards (DIN-Normen).SupersedesAugust 2002 edition.English price group 14www.din.dewww.beuth.de9637699Continued overleaf.Document comprises 27 pages.06.05English versionICS 23.040.10; 77.140.75 Supersedes EN 10217-2:2002.Welded steel tubes for pre
7、ssure purposes Technical delivery conditionsPart 2: Electric welded non-alloy and alloy steel tubeswith specified elevated temperature properties(includes Amendment A1:2005) 2005. CEN All rights of exploitation in any form and by any meansreserved worldwide for CEN national members.Ref. No. EN 10217
8、-2:2002 + A1:2005 EGeschweite Stahlrohre fr Druckbe-anspruchungen Technische Liefer-bedingungen Teil 2: Elektrisch ge-schweite Rohre aus unlegierten undlegierten Sthlen mit festgelegten Ei-genschaften bei erhhten Temperatu-ren (enthlt nderung A1:2005)This European Standard was approved by CEN on 200
9、2-04-25 and AmendmentA1 on 2004-12-09.CEN members are bound to comply with the CEN/CENELEC Internal Regulationswhich stipulate the conditions for giving this European Standard the status of anational standard without any alteration.Up-to-date lists and bibliographical references concerning such nati
10、onal stand-ards may be obtained on application to the Management Centre or to anyCEN member.The European Standards exist in three official versions (English, French, German).A version in any other language made by translation under the responsibility of aCEN member into its own language and notified
11、 to the Management Centre hasthe same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, theCzech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlan
12、ds,Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland, andthe United Kingdom.Management Centre: 36, rue de Stassart, B-1050 BrusselsEuropean Committee for StandardizationComit Europen de NormalisationEuropisches Komitee fr NormungTubes souds en acier pour servicesous pression C
13、onditions techni-ques de livraison Partie 2: Tubessouds lectriquement en acier nonalli et alli avec caractristiques sp-cifies temprature leve (amende-ment A1:2005 inclus)EN 10217-2January 2005+A1May 2002Page 2EN 10217-2:2002 + A1:2005ContentsPageForeword to EN 10217-2:2002 . . . . . . . . . . . . .
14、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Foreword to EN 10217-2:2002/A1:2005 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Scope . . . . . . . . . . . . . . . . . . . . . .
15、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Normative references . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Terms and definitions
16、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
17、. . 55 Classification and designation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65.1 Classification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
18、. . . . . . . . . . . 65.2 Designation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Information to be supplied by the purchaser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
19、. . . . . . . . . . . . . . . 66.1 Mandatory information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66.2 Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
20、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Manufacturing process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77.1 Steelmaking process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
21、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77.2 Deoxidation process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77.3 Tube manufacture and delivery conditions . . . . . . . . . . .
22、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88.1 General . . . . . . . . . . . . . . . . . . . . . . .
23、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88.2 Chemical composition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98.3 Mechanical properties . . .
24、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98.4 Appearance and internal soundness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128.5 Straightness . . . . .
25、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138.6 Preparation of ends . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
26、.7 Dimensions, masses and tolerances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139 Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
27、. . . . . 179.1 Type of inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179.2 Inspection documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
28、. . . . . . . . . . . . . . 179.3 Summary of inspection and testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1810 Sampling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
29、. . . . . . . . . . . . . . . . . . . . . 1910.1 Frequency of tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1910.2 Preparation of samples and test pieces . . . . . . . . . . . . . . . . . . . . . . . . . .
30、. . . . . . . . . . . . . . . . . . . . . . . . 1911 Test methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2111.1 Chemical analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
31、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2111.2 Tensile test on base material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2111.3 Transversse tensile test on the weld . . . . . . . . . . . . . . . .
32、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2111.4 Flattening test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2111.5 Ring tensile test . . . . . . . . . . . . . . . . . . .
33、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2211.6 Drift expanding test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2211.7 Ring expanding test . . . . . . .
34、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2211.8 Impact test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2211.9 Leak-tigh
35、tness test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2311.10 Dimensional inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
36、11.11 Visual examination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2411.12 Non-destructive testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
37、 . . . . . . 2411.13 Material identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2411.14 Retests, sorting and reprocessing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
38、 . . . . . . . . . 2412 Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2412.1 Marking to be applied . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
39、 . . . . . . . . . . . . . . . . . . . . . 2412.2 Additional marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2513 Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
40、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Annex ZA (informative) Relationship between this European Standard and the EssentialRequirements of 97/23/EC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Bibliography . . . . . . . . . .
41、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Page 3EN 10217-2:2002 + A1:2005Foreword to EN 10217-2:2002This European Standard has been prepared by Technical Committee ECISS/TC 29 Steel tubes and fittings fors
42、teel tubes, the Secretariat of which is held by UNI.This European Standard has been prepared under a mandate given to CEN by the European Commission andthe European Free Trade Association, and supports essential requirements of the relevant EU Directive.For relationship with this directive, see Anne
43、x ZA.This European Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorsement, and conflicting national standards withdrawn, by November 2002 at the latest.Other parts of EN 10217 are:Part 1: Non-alloy steel tubes with specified room temper
44、ature propertiesPart 3: Alloy fine grain steel tubesPart 4: Electric welded non-alloy steel tubes with specified low temperature propertiesPart 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature propertiesPart 6: Submerged arc welded non-alloy steel tubes wit
45、h specified low temperature propertiesPart 7: Stainless steel tubesAnother European Standard series covering tubes for pressure purposes is:EN 10216 Seamless steel tubes for pressure purposes.In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations of the follow-
46、ing countries are bound to implement this European Standard:Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, Malta, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom.Foreword to EN 10217-2:2002/A1
47、:2005This amendment to EN 10217-2:2002 has been prepared by Technical Committee ECISS/TC 29 Steel tubesand fittings for steel tubes, the Secretariat of which is held by UNI.This European Standard has been prepared under a mandate given to CEN by the European Commission andthe European Free Trade Ass
48、ociation, and supports essential requirements of the relevant EU Directive.For relationship with this directive, see Annex ZA.This amendment shall be given the status of a national standard, either by publication of an identical text or byendorsement, and conflicting national standards withdrawn, by
49、 July 2005 at the latest.In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations of the follow-ing countries are bound to implement this European Standard:Austria, Belgium, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal,Slovakia, Slovenia, Spain, Sweden, Switzerland, and the United Kingdom.Page 4EN 10217-2:2002 + A1:20051 Scope2 Normative references
