1、February 2013 Translation by DIN-Sprachendienst.English price group 9No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).IC
2、S 77.140.65!$R“1944729www.din.deDDIN EN 10223-5Steel wire and wire products for fencing and netting Part 5: Steel wire woven hinged joint and knotted mesh fencing;English version EN 10223-5:2012,English translation of DIN EN 10223-5:2013-02Stahldraht und Drahterzeugnisse fr Zune und Drahtgeflechte T
3、eil 5: Gelenk- und Knotengitter aus Stahldraht fr Zune;Englische Fassung EN 10223-5:2012,Englische bersetzung von DIN EN 10223-5:2013-02Fils et produits trfils en acier pour cltures et grillages Partie 5: Grillage nou et grillage raccords pivotants en acier;Version anglaise EN 10223-5:2012,Traductio
4、n anglaise de DIN EN 10223-5:2013-02SupersedesDIN EN 10223-5:1998-06www.beuth.deDocument comprises 14 pagesIn case of doubt, the German-language original shall be considered authoritative.01.13DIN EN 10223-5:2013-02 2 A comma is used as the decimal marker. National foreword This document (EN 10223-5
5、:2012) has been prepared by Technical Committee ECISS/TC 106 “Wire rod and wires” (Secretariat: AFNOR, France). The responsible German body involved in its preparation was the Normenausschuss Stahldraht und Stahl-drahterzeugnisse (Steel Wire and Wire Products Standards Committee), Working Committee
6、NA 099-00-01 AA Stahldraht. For more detailed information about the Normenausschuss Stahldraht und Stahldrahterzeugnisse (NAD), please visit www.nad.din.de. Amendments This standard differs from DIN EN 10223-5:1998-06 as follows: a) requirements for tensile strength and zinc and zinc alloy coatings
7、have been revised; b) the standard has been editorially revised. Previous editions DIN EN 10223-5: 1998-06 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 10223-5 November 2012 ICS 77.140.65 Supersedes EN 10223-5:1998English Version Steel wire and wire products for fencing and netting - Part 5:
8、 Steel wire woven hinged joint and knotted mesh fencing Fils et produits trfils en acier pour cltures et grillages - Partie 5: Grillage nou et grillage raccords pivotants en acier Stahldraht und Drahterzeugnisse fr Zune und Drahtgeflechte - Teil 5: Gelenk- und Knotengitter aus Stahldraht fr Zune Thi
9、s European Standard was approved by CEN on 13 October 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical refere
10、nces concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN
11、member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
12、 France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCH
13、ES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 10223-5:2012: EEN 10223-5:2012 (E) 2 Contents Page Foreword 31 Scope 42 Normative references 43 Terms a
14、nd definitions .44 Information to be supplied by the purchaser .65 Designation of hinged joint and knotted mesh fencing.66 Manufacture 66.1 Base metal 66.2 Fabrication 77 Requirements .77.1 Tensile strength .77.1.1 Woven hinged joint fencing 77.1.2 Knotted mesh fencing .77.2 Wire diameters .77.2.1 W
15、oven hinged joint fencing 77.2.2 Knotted mesh fencing .77.3 Tolerances 77.4 Coating 78 Sampling and testing . 109 Inspection documentation . 1010 Test methods . 1010.1 Tensile tests 1010.2 Coating tests . 1011 Packaging 10Annex A (informative) Typical designations for hinged joint and knotted joint
16、fencing 11DIN EN 10223-5:2013-02 EN 10223-5:2012 (E) 3 Foreword This document (EN 10223-5:2012) has been prepared by Technical Committee ECISS/TC 106 “Wire rod and wires”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by pu
17、blication of an identical text or by endorsement, at the latest by May 2013, and conflicting national standards shall be withdrawn at the latest by May 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall
18、 not be held responsible for identifying any or all such patent rights. This document supersedes EN 10223-5:1998. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. EN 10223 “Steel wire and wire products for fencing and ne
19、tting“ consists of the following parts: Part 1: Zinc and zinc-alloy coated steel barbed wire Part 2: Hexagonal steel wire netting for agricultural, insulation and fencing purposes Part 3: Hexagonal steel wire mesh products for engineering purposes Part 4: Steel wire welded mesh fencing Part 5: Steel
20、 wire woven hinged joint and knotted mesh fencing Part 6: Steel wire chain link fencing Part 7: Steel wire welded panels for fencing Part 8: Welded mesh gabion products According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to imp
21、lement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romani
22、a, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 10223-5:2013-02 EN 10223-5:2012 (E) 4 1 Scope This European Standard specifies preferred dimensions, properties and coatings of zinc and zinc alloy coated steel wire woven hinged joint and knotted mesh fencing.
23、2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amend
24、ments) applies. EN 10021, General technical delivery conditions for steel products EN 10204, Metallic products Types of inspection documents EN 10218-1, Steel wire and wire products General Part 1: Test methods EN 10218-2:2012, Steel wire and wire products General Part 2: Wire dimensions and toleran
25、ces EN 10244-1:2009, Steel wire and wire products Non-ferrous metallic coatings on steel wire Part 1: General principles EN 10244-2:2009, Steel wire and wire products Non-ferrous metallic coatings on steel wire Part 2: Zinc and zinc alloy coatings 3 Terms and definitions For the purposes of this doc
26、ument, the following terms and definitions apply. 3.1 knotted mesh fencing fencing with rectangular meshes made of line and stay wires zinc or zinc alloy coated to EN 10244-1:2009 and EN 10244-2:2009, class A The line and stay wires are connected by a hinged joint spiral knot in the case of hinge jo
27、int stock fence (see Figure 1) and by a knot in the case of knotted stock fence (see Figure 2) (except for the selvedge wire which is spiral knotted): The top and bottom wires of the fence may consist of a larger diameter selvedge wire. The rectangular mesh openings may decrease in size from the top
28、 downwards. The line and selvedge wire are regularly and evenly crimped between the stay wires (to aid erection of the fence) 3.2 woven joint fencing classification relating to: a) strength of wire: 1. strength 1 applies to fencing manufactured from low tensile wire; 2. strength 2 applies to fencing
29、 manufactured from high tensile wire; DIN EN 10223-5:2013-02 EN 10223-5:2012 (E) 5 b) nominal diameter of wires incorporated in the fence using: 1. L for light (small diameter wire); 2. M for medium (medium diameter wire); 3. H for heavy (large diameter wire) Key 1 selvedge wire 4 length 2 stay wire
30、 5 height 3 line wire Figure 1 Example of woven hinged joint design a) b) c) Figure 2 Examples of knotted joint design DIN EN 10223-5:2013-02 EN 10223-5:2012 (E) 6 4 Information to be supplied by the purchaser The following information shall be supplied by the purchaser at the time of enquiry and or
31、der: a) number of this European Standard; b) quantity; c) hinged joint or knotted joint; d) classification (i.e. L, M or H and 1 or 2 according to Table 1); e) designation (see Clause 5, Table A.1 and Table A.2); f) length of rolls; g) height of roll; h) number of line wires and stay wire spacing; i
32、) for 2M and 2H (according to Table 1) the size of selvedge wire required; j) coating type, zinc or zinc alloy; k) if uniformity of coating is to be measured; l) inspection documentation requirements; m) agreed quality characteristics for testing (see Clause 7). 5 Designation of hinged joint and kno
33、tted mesh fencing Figure 3 EXAMPLE 80/8/15 Typical designations of hinged joint and knotted mesh fencing are given in Table A.1 and Table A.2. 6 Manufacture 6.1 Base metal Wires shall be manufactured from steel rod capable of achieving the tensile properties given in Tables 1 and 2. DIN EN 10223-5:2
34、013-02 EN 10223-5:2012 (E) 7 6.2 Fabrication The hinge joint or knotted fence shall be made from zinc or zinc-alloy coated wires which conform to EN 10244-1 and EN 10244-2. The line and selvedge wires shall be regularly and evenly crimped between the stay wires (to aid erection of the fence). In the
35、 case of hinge joint fencing the wires shall be twisted at least one and a half times to ensure that the hinge joints are tightly fixed. In the case of knotted joint fencing the knots shall be manufactured so that they are tightly fixed. 7 Requirements 7.1 Tensile strength 7.1.1 Woven hinged joint f
36、encing The tensile strength of wires shall not be less than that given in Table 1 for the classification and tensile strength required. The tensile strength range for any one batch within a type of wire shall be not more than 200 N/mm2. 7.1.2 Knotted mesh fencing The tensile strength of the wires sh
37、all be not less than that given in Table 2. The tensile strength range in any one batch within a wire type shall be not more than 200 N/mm2. 7.2 Wire diameters 7.2.1 Woven hinged joint fencing The nominal diameters of wires shall be as given in Table 1 and shall be subject to tolerance EN 10218-2:20
38、12 (T1 Table 1). 7.2.2 Knotted mesh fencing The nominal diameters of wires shall be as given in Table 2 and shall be subject to tolerance EN 10218-2:2012 (T1 - Table 1). 7.3 Tolerances The tolerance on roll width is 25 mm. The maximum variation in any individual vertical or horizontal spacing shall
39、be no more than 5 mm from the nominal stated by the manufacturer. NOTE Rolls are usually supplied with either 150 or 300 mm spacing between verticals, but other spacing may be arranged by agreement. 7.4 Coating The zinc or zinc alloy coating of wire shall be tested in accordance with EN 10244-2:2009
40、 complying with class A for Zn coatings and class B for Zn95/Al5 alloys (for similar service life), adherence and where specified, the uniformity of the coating DIN EN 10223-5:2013-02 EN 10223-5:2012 (E) 8 Where samples are taken from a fabricated fence the minimum coating mass requirement shall be
41、reduced by 5 % and where specified the number of dips shall be reduced by one half minute dip. The assessment of adherence (wrap quality) on 1 diameter for all wires prior to fabrication of the fence shall comply with EN 10244-2:2009 (Figure 1) classes 1 or 2. The assessment of adherence (wrap quali
42、ty) on 1 diameter of the wire in the fabricated fence shall comply with EN 10244-2:2009 (Figure 1) classes 1, 2 or 3. DIN EN 10223-5:2013-02 EN 10223-5:2012 (E) 9 Table 1 Preferred nominal diameters and minimum tensile strengths for woven hinged joint fencing Wire type Low tensile steel woven wire h
43、inged joint High tensile woven wire hinged joint Light 1L Medium 1M Heavy 1H Light 2L Medium 2M Heavy 2H Nominal diameter Minimum tensile strength Nominal diameter Minimum tensile strength Nominal diameter Minimum tensile strength Nominal diameter Minimum tensile strength Nominal diameter Minimum te
44、nsile strength Nominal diameter Minimum tensile strength mm N/mm2mm N/mm2mm N/mm2mm N/mm2mm N/mm2mm N/mm2Top and bottom line (horizontal) selvedge wires 2,50 600 3,00 600 3,70 550 1,60 or 2,00 1 050 2,00 or 2,50 1 050 2,50 or 3,00 a1 050 Intermediate line (horizontal) wires 1,90 600 2,50 600 3,00 60
45、0 1,60 1 050 2,00 1 050 2,50 1 050 Stay (vertical) wires 1,90 400 2,50 350 3,00 350 1,60 600 2,00 600 2,50 600 Tensile strength range for any one batch within a type of wire shall be not more than 200 N/mm2. aWhere the duty of the fence requires them, larger diameter selvedge wires may be agreed. DI
46、 N E N 10223 - 5 : 2013 - 02 EN 10223-5:2012 (E) 10 Table 2 Preferred nominal wire diameters and minimum tensile strengths of wire for woven knotted mesh fencing Wire type Nominal wire diameter mm Minimum tensile strength N/mm2Top and bottom line/selvedge (horizontal) wires 3,70 550Intermediate line
47、 (horizontal) wires 3,00 600 Stay (vertical) wires 3,00 600 Knot wire 3,00 350 Tensile strength range in any one batch within a wire type shall be not more than 200 N/mm2. 8 Sampling and testing The manufacturer shall be responsible for the control of product quality by the application of statistica
48、l methods of sampling and analysis of results or, alternatively, by sampling and testing for the agreed quality characteristics at a rate of one roll/reel in 50. 9 Inspection documentation Unless otherwise agreed at the time of enquiry and order, non specific testing and inspection documentation sha
49、ll be provided according to the requirements of EN 10021 and EN 10204. 10 Test methods 10.1 Tensile tests Tensile tests shall be in accordance with EN 10218-1. 10.2 Coating tests The zinc or zinc alloy coated wire before fabrication into the fence shall be tested for the weight, adherence of coating and, where required, the uniformity of coating in accordance with EN 10244-1 and EN 10244-2. 11 Packaging Woven hinged or knotted joint fencing s
