1、December 2008DEUTSCHE NORM English price group 11No part of this standard may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 17.140.20; 25.140.99!
2、$Tq2“1497815www.din.deDDIN EN 12549Acoustics Noise test code for fastener driving tools Engineering method (includes Amendment A1:2008)English version of DIN EN 12549:2008-12Akustik Geruschmessverfahren fr Eintreibgerte Verfahren der Genauigkeitsklasse 2 (enthlt nderung A1:2008)Englische Fassung DIN
3、 EN 12549:2008-12SupersedesDIN EN 12549:1999-10www.beuth.deDocument comprises 19 pagesDIN EN 12549:2008-12 2 Start of validity This standard takes effect on 1 December 2008. DIN EN 12549:1999-10 may be used in parallel until 28 December 2009. National foreword This standard includes safety requireme
4、nts. This standard has been prepared by Technical Committee CEN/TC 255 “Hand-held, non-electric power tools Safety” (Secretariat: SIS, Sweden). The responsible German bodies involved in its preparation were the Normenausschuss Akustik, Lrm-minderung und Schwingungstechnik im DIN und VDI (Acoustics,
5、Noise Control and Vibration Engineering Standards Committee in DIN and VDI), Technical Committee NA 001-01-04 AA Geruschemission von Maschinen und Anlagen; Messung, Minderung, Datensammlung in collaboration with the Normenausschuss Eisen-, Blech- und Metallwaren (Hardware, Tinware and Metal Products
6、 Standards Committee) and the Normenausschuss Maschinenbau (Mechanical Engineering Standards Committee). This standard concretizes the basic requirements set out in Annex I of the EU Machinery Directive 98/37/EEC (valid until 28 December 2009) and the new EU Machinery Directive 2006/42/EC which beco
7、mes applicable on 29 December 2009 relating to handheld non-electric fastener driving tools to be placed on the EEA market, with the intent of simplifying the means of proving conformity with such requirements. Once this standard is designated a harmonized standard in the Official Journal of the Eur
8、opean Union, a manufacturer applying this standard may assume compliance with the requirements of the Machinery Directive (the so-called “presumption of conformity”). This standard makes reference to EN 60651 and EN 60804 which were valid as of the publication of the European standard. Since then, t
9、hese standards have been replaced by EN 61672-1 “Electroacoustics Sound level meters Part 1: Specifications (IEC 61672-1:2002)” and EN 61672-2 “Electroacoustics Sound level meters Part 2: Pattern evaluation tests (IEC 61672-2:2003)”. Amendments This standard differs from DIN EN 12549:1999-10 as foll
10、ows: a) Amendment A1 has been incorporated, i.e. informative Annex ZA has been revised, informative Annex ZB has been added. Previous editions DIN 45635-66: 1992-05 DIN EN 12549: 1999-10 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12549:1999+A1 September 2008 ICS 17.140.20; 25.140.99 Supers
11、edes EN 12549:1999English Version Acoustics - Noise test code for fastener driving tools - Engineering method Acoustique - Code dessai acoustique pour les machines enfoncer les fixations - Mthode dexpertise Akustik - Geruschmessverfahren fr Eintreibgerte - Verfahren der Genauigkeitsklasse 2 This Eur
12、opean Standard was approved by CEN on 30 October 1998 and includes Amendment 1 approved by CEN on 26 July 2008. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alt
13、eration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by tr
14、anslation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Ger
15、many, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUN
16、G Management Centre: rue de Stassart, 36 B-1050 Brussels 2008 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12549:1999+A1:2008: EEN 12549:1999+A1:2008 (E) 2 Contents Page Foreword4 Introduction .5 1 Scope 5 2 Normative references
17、 5 3 Definitions 6 4 Description of fastener driving tools.6 5 Sound power level determination 6 5.1 Basic International Standards to be used.6 5.2 Measurement procedure .7 5.3 Calculation8 5.4 Measurement uncertainty .8 6 Emission sound pressure level determination.9 6.1 Basic International Standar
18、ds to be used.9 6.2 Selection of relevant work station .9 6.3 Measurement procedure .9 6.4 Measurement uncertainty .9 7 Installation and mounting conditions9 7.1 General9 7.2 Measuring instruments .10 7.3 Test environment.10 8 Operating conditions.10 8.1 General10 8.2 Object to be measured and opera
19、ting conditions10 8.3 Workpiece.10 8.4 Workpiece support 11 8.5 Position of the fastener driving tool 11 9 Measurement uncertainties 11 10 Information to be recorded .11 10.1 General11 10.2 Type and technical information on the fastener driving tool and the fasteners to be used (including limits) 11
20、 10.3 Information about the operating conditions .11 10.4 Description of the measurement installation and surroundings11 10.5 Measurement instruments used.11 10.6 Measured values and calculated results, containing.11 11 Information to be reported12 12 Declaration and verification of noise emission v
21、alues12 Annex A (informative) Calculation of equivalent continuous emission sound pressure level.13 Annex B (informative) Model form for the declaration of noise emission values of fastener driving tools operated with compressed air 14 Annex C (informative) Bibliography 15 DIN EN 12549:2008-12 EN 12
22、549:1999+A1:2008 (E) 3 Annex ZA (informative) !Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC“16 Annex ZB (informative) !Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC“17 DIN EN 12549:2008-12
23、EN 12549:1999+A1:2008 (E) 4 Foreword This document (EN 12549:1999+A1:2008) has been prepared by Technical Committee CEN/TC 255 “Hand-held, non-electric power tools - Safety“, the secretariat of which is held by SIS. This European Standard shall be given the status of a national standard, either by p
24、ublication of an identical text or by endorsement, at the latest by March 2009, and conflicting national standards shall be withdrawn at the latest by December 2009. This document includes Amendment 1, approved by CEN on 2008-07-26. This document supersedes EN 12549:1999. The start and finish of tex
25、t introduced or altered by amendment is indicated in the text by tags ! “. This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). !For relationship with EU Direc
26、tive(s), see informative Annexes ZA and ZB, which are integral parts of this document.“ According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic
27、, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. DIN EN 12549:2008-12 EN 12549:1999+A1:2008 (E) 5 Introducti
28、on This noise test code describes methods for determining and presenting the acoustical characteristics of fastener driving tools. The EC Machinery Directive prescribes that noise emission values for the machines in a defined process shall be stated. The manufacturer of fastener driving tools must i
29、ndicate the operating conditions during the noise measurement and what methods have been used for the measurement. 1 Scope This standard applies to fastener driving tools. The noise created by fastener driving tools directly affecting the surrounding environment (noise emission) should calculated in
30、 a uniform procedure enabling comparison of the final results. This standard contains provisions concerning the execution of the measurement of airborne noise in the vicinity of fastener driving tools and the measurement of emission sound pressure levels at the work station under defined operating c
31、onditions. The determination of the noise emission levels of fastener driving tools in accordance with this standard is valid for all actuating systems in accordance with EN 792-13. The results can be used to compare the noise emissions of different fastener driving tools. NOTE The special condition
32、s at the work place (e.g. shape and foundation of the workpiece, quantity and frequency of the driving processes) can influence the noise emission to an important degree. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. The
33、se normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undat
34、ed references the latest edition of the publication referred to applies. EN 292-2, Safety of machinery Basic concepts, general principles for design Part 2: Technical principles and specifications EN 792-13, Handheld non-electric power tools - Safety requirements Part 13: Fastener driving tools EN 6
35、0651, Sound level meters EN 60804, Integrating-averaging sound level meters EN ISO 3744, Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering method in an essentially free field over a reflecting plane EN ISO 4871, Acoustics - Declaration and verificati
36、on of noise emission values of machinery and equipment EN ISO 11201, Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Engineering method in an essentially free field over a reflecting plane DIN E
37、N 12549:2008-12 EN 12549:1999+A1:2008 (E) 6 3 Definitions For the purposes of this standard, the following definitions apply: 3.1 A-weighted single-event emission sound pressure level, LpA,1sin dB: A-weighted and time-integrated emission sound pressure level of an isolated single sound event of spec
38、ified duration T (or specified measurement time T), related to T0= 1 s; it is given by the following equation: LpA,1 s= 10 lg 10TT0202)(ptpdt dB = LpAeq,T+ 10 lg TT 0dB (1) The reference sound pressure is p0= 20 Pa. 3.2 A-weighted single-event sound power level, LWA,1sin dB: A-weighted sound power l
39、evel determined from measurements of the single-event sound pressure level. 3.3 C-weighted peak emission sound pressure level, LpC,peakin dB: The C-weighted peak emission sound pressure level of a test object, determined in accordance with EN ISO 11201 at the work station. 3.4 Fastener driving tool
40、See EN 792-13. 4 Description of fastener driving tools Fastener driving tools are handheld power tools in which energy is applied in a linear movement to inserted fasteners for the purpose of driving. The design of these fastener driving tools is such that in normal circumstances they may be carried
41、 by one person and are handheld during the driving process. NOTE Fastener driving tools are named e.g. nailers, staplers, tackers, pinners. The energy required for the driving process can be drawn e.g. from compressed air, electrical current, combustible gases, tension springs. Fasteners may be e.g.
42、 nails, staples, pins, brads, corrugated fasteners and screws used as nails. The frequency of the driving processes with a fastener driving tool varies in time according to the operation purpose (e.g. 500 driving processes per day may be carried out with a big fastener driving tool against 20 per se
43、cond with a small one). The time duration of one driving process is normally in a range of 0,1 s or shorter. 5 Sound power level determination 5.1 Basic International Standards to be used If it is required to determine the sound power level, basic sound power measurement standards shall be used, suc
44、h as EN ISO 3744. DIN EN 12549:2008-12 EN 12549:1999+A1:2008 (E) 7 The sound power level shall be given as A-weighted sound power level in dB. The reference sound power is 1pW (1 pW = 10-12W). 5.2 Measurement procedure 5.2.1 Measurement surface The measurement surface is a hypothetical cube on which
45、 the measurement positions are located and which envelops the fastener driving tool (see figure 1). Exception: Position O for measuring the A-weighted single-event emission sound pressure level at work station. The measurement surface ends at floor level, which is to be regarded as a sound reflectin
46、g periphery. The height of the centre point of the fastener driving tool above the ground shall be (1,00 0,10) m. The centre point is located on the driving axis at half of the height of the fastener driving tool. NOTE Because a fastener driving tool is of small size the centre point of a fastener d
47、riving tool is used instead of the surface. 5.2.2 Measurement distance The measurement distance shall be 1,00 m from the centre point of the fastener driving tool (see figure 1). 5.2.3 Measurement positions The location of the nine measurement positions i = 1, 2, ., 9 shall be that of figure 1. Dime
48、nsions in metres Measurement positions 0 Measurement position at the work station (near the operators ear) Figure 1 Location of the measurement positions for fastener driving tools DIN EN 12549:2008-12 EN 12549:1999+A1:2008 (E) 8 5.2.4 Measurement of the A-weighted single-event sound pressure level
49、The A-weighted single-event sound pressure level of one driving process LpA,1sshall be measured five times at each measurement position i. The arithmetic mean of the five values shall be determined for each measurement position i and is denoted LpA,1s, i (with i = 1, 2, .9). NOTE In the case of fastener driving tools which can be actuated only by continuous actuation of the driving process, the A-weighted sound pressure level LpA,ishould be measured five times for the same time duration (e.g. 5 s) and the number of driving