1、September 2014 Translation by DIN-Sprachendienst.English price group 11No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).
2、ICS 13.040.30!%:gb“2236863www.din.deDDIN EN 13205-6Workplace exposure Assessment of sampler performance for measurement of airborneparticle concentrations Part 6: Transport and handling tests;English version EN 13205-6:2014,English translation of DIN EN 13205-6:2014-09Exposition am Arbeitsplatz Beur
3、teilung der Leistungsfhigkeit von Sammlern fr die Messung der Konzentrationluftgetragener Partikel Teil 6: Prfungen zum Transport und zur Handhabung;Englische Fassung EN 13205-6:2014,Englische bersetzung von DIN EN 13205-6:2014-09Exposition sur les lieux de travail valuation des performances des dis
4、positifs de prlvement pour la mesure desconcentrations de particules en suspension dans lair Partie 6: Essais de manipulation et de transport;Version anglaise EN 13205-6:2014,Traduction anglaise de DIN EN 13205-6:2014-09Together with DIN EN 13205-1:2014-09, DIN EN 13205-2:2014-09, DIN EN 13205-4:201
5、4-09 andDIN EN 13205-5:2014-09 supersedes DIN EN 13205:2002-04Supersedes: see belowwww.beuth.deDocument comprises 20 pagesIn case of doubt, the German-language original shall be considered authoritative.08.14DIN EN 13205-6:2014-09 2 A comma is used as the decimal marker. National foreword This docum
6、ent (EN 13205-6:2014) has been prepared by Technical Committee CEN/TC 137 “Assessment of workplace exposure to chemical and biological agents” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was the Normenausschuss Sicherheitstechnische Grundstze (DIN Standards C
7、ommittee Safety Design Principles), Working Group NA 095-03-01-01 AK Staub of Working Committee NA 095-03-01 AA Messstrategien und Anforderungen an Messverfahren. Part 3 of this standards series has been published as Technical Report CEN/TR 13205-3:2014. A corresponding German-language Standard has
8、not been published by DIN. The DIN Standard corresponding to the International Standard referred to in this document is as follows: ISO 15767 DIN ISO 15767 Amendments This standard differs from DIN EN 13205:2002-04 as follows: a) the standard has been divided up into a six-part series (see European
9、foreword); b) the content of this Part 6 has been limited to the specification of two methods for testing transport losses of aerosol sampler substrates under prescribed conditions; c) the standard has been editorially revised. Previous editions DIN EN 13205: 2002-04 National Annex NA (informative)
10、Bibliography DIN ISO 15767, Workplace atmospheres Controlling and characterizing uncertainty in weighing collected aerosols EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13205-6 June 2014 ICS 13.040.30 Supersedes EN 13205:2001English Version Workplace exposure - Assessment of sampler performa
11、nce for measurement of airborne particle concentrations - Part 6: Transport and handling tests Exposition sur les lieux de travail - valuation des performances des dispositifs de prlvement pour la mesure des concentrations de particules en suspension dans lair - Partie 6: Essais de manipulation et d
12、e transportExposition am Arbeitsplatz - Beurteilung der Leistungsfhigkeit von Sammlern fr die Messung der Konzentration luftgetragener Partikel - Teil 6: Prfungen zum Transport und zur Handhabung This European Standard was approved by CEN on 7 May 2014. CEN members are bound to comply with the CEN/C
13、ENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centr
14、e or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the
15、official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherla
16、nds, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights
17、 of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13205-6:2014 EEN 13205-6:2014 (E) 2 Contents Page Foreword 3 Introduction . 4 1 Scope 5 2 Normative references 5 3 Terms and definitions . 5 4 Symbols and abbreviations 5 4.1 Symbols 5 4.1.1 Latin
18、5 4.1.2 Greek . 6 4.2 Enumerating subscripts 7 5 Transport test based on weighing samples before and after shipping by mail 7 5.1 Principle 7 5.2 Test procedure . 7 5.2.1 General 7 5.2.2 Test equipment 7 5.2.3 Test aerosol and method of loading collection media 8 5.2.4 Test method 8 5.3 Calculations
19、 9 5.4 Test Report . 11 5.4.1 General 11 5.4.2 Testing laboratory details and sponsoring organisation 11 5.4.3 Description of candidate sampler and collection substrate . 11 5.4.4 Description of test methods and materials . 11 5.4.5 Results 11 5.4.6 Summary . 12 6 Handling test for loaded samplers o
20、r collection substrates using a shaker 12 6.1 Principle 12 6.2 Test procedure . 12 6.2.1 General 12 6.2.2 Test equipment 12 6.2.3 Mounting of the samplers . 13 6.2.4 Test aerosol and method of loading collection media 13 6.2.5 Test method 13 6.3 Calculations 14 6.4 Test Report . 16 6.4.1 General 16
21、6.4.2 Testing laboratory details and sponsoring organisation 16 6.4.3 Description of candidate sampler and collection substrate . 16 6.4.4 Description of test methods and materials . 16 6.4.5 Results 16 6.4.6 Summary . 17 Bibliography 18 DIN EN 13205-6:2014-09 EN 13205-6:2014 (E) 3 Foreword This doc
22、ument (EN 13205-6:2014) has been prepared by Technical Committee CEN/TC 137 “Assessment of workplace exposure to chemical and biological agents”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical te
23、xt or by endorsement, at the latest by December 2014 and conflicting national standards shall be withdrawn at the latest by December 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held respon
24、sible for identifying any or all such patent rights. This document together with EN 13205-1, EN 13205-2, CEN/TR 13205-3, EN 13205-4 and EN 13205-5 supersedes EN 13205:2001. EN 13205, Workplace exposure Assessment of sampler performance for measurement of airborne particle concentrations, consists of
25、 the following parts: Part 1: General requirements; Part 2: Laboratory performance test based on determination of sampling efficiency; Part 3: Analysis of sampling efficiency data Technical Report; Part 4: Laboratory performance test based on comparison of concentrations; Part 5: Aerosol sampler per
26、formance test and sampler comparison carried out at workplaces; Part 6: Transport and handling tests (the present document). Significant technical changes from the previous edition, EN 13205:2001: This part of EN 13205 is partly based on Annex D of the previous edition, EN 13205:2001. The scope has
27、been limited to aerosol samplers, and the current version of the standard is not (directly) applicable to other types of aerosol instruments. As this is now a standard in its own right, a clause on the used symbols has been added. Almost all definitions are now given either in EN 1540, Workplace exp
28、osure Terminology or in Part 1 of this standard. The method of calculating the uncertainty of a sampler or a measuring procedure has been revised in order to comply with ENV 13005. The concept of “accuracy” is no longer used instead the concept of “expanded uncertainty” is used. The standard gives t
29、wo methods to determine the dependence of the mass loss from collection substrates due to transport and/or handling, respectively. It is described how to use the test data to calculate the uncertainty due to transport/handling and how this is related to the requirements given in Part 1 of this Europ
30、ean Standard. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedoni
31、a, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 13205-6:2014-09 EN 13205-6:2014 (E) 4 Introduction EN 481 defines
32、sampling conventions for the particle size fractions to be collected from workplace atmospheres in order to assess their impact on human health. Conventions are defined for the inhalable, thoracic and respirable aerosol fractions. These conventions represent target specifications for aerosol sampler
33、s, giving the ideal sampling efficiency as a function of particle aerodynamic diameter. In general, the sampling efficiency of real aerosol samplers will deviate from the target specification, and the aerosol mass collected will therefore differ from that which an ideal sampler would collect. In add
34、ition, the behaviour of real samplers is influenced by many factors such as external wind speed. In many cases there is an interaction between the influence factors and fraction of the airborne particle size distribution of the environment in which the sampler is used. This part of EN 13205 describe
35、s two test methods for determining the uncertainties due to transport errors. The values calculated can directly be compared to the requirements of EN 13205-1:2014 The first method is based on loading collection substrates with particles from a workplace aerosol and delivery by ordinary mail. The se
36、cond method is based on loading collection substrates with particles from a specified laboratory test aerosol and subsequent exposure of the collection substrates to vibrations using either a laboratory shaker table or a vertical shaker. EN 13205 (all parts) enables manufacturers and users of aeroso
37、l samplers to adopt a consistent approach to sampler validation, and provide a framework for the assessment of sampler performance with respect to EN 481 and EN 482. It is the responsibility of the manufacturer of aerosol samplers to inform the user of the sampler performance under the laboratory co
38、nditions1)specified in this part of EN 13205. It is the responsibility of the user to ensure that the actual conditions of intended use are within what the manufacturers specifies as acceptable conditions according to the performance test. 1) The inhalable convention is undefined for particle sizes
39、in excess of 100 m or for wind speeds greater than 4 m/s. The tests required to assess performance are therefore limited to these conditions. Should such large particle sizes or wind speeds actually exist at the time of sampling, it is possible that different samplers meeting this standard give diff
40、erent results. DIN EN 13205-6:2014-09 EN 13205-6:2014 (E) 5 1 Scope This European Standard specifies a performance test of loaded collection substrates for samplers for the inhalable, thoracic or respirable aerosol fractions and, as alternative, a handling test, both for testing transport losses of
41、aerosol sampler substrates under prescribed conditions in order to calculate the expanded uncertainty of a measuring procedure according to EN 13205-1:2014, Annex A. The transport test involves shipping loaded substrates with ordinary mail, whereas the handling test uses a shaker. This part of EN 13
42、205 applies to all samplers used for the health-related sampling of particles in workplace air. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited app
43、lies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 143, Respiratory protective devices - Particle filters - Requirements, testing, marking EN 1540, Workplace exposure - Terminology EN 13205-1:2014, Workplace exposure Assessment of sampl
44、er performance for measurement of airborne particle concentrations Part 1: General requirements EN 13205-2:2014, Workplace exposure Assessment of sampler performance for measurement of airborne particle concentrations Part 2: Laboratory performance test based on determination of sampling efficiency
45、ISO 15767, Workplace atmospheres Controlling and characterizing uncertainty in weighing collected aerosols 3 Terms and definitions For the purpose of this document, the terms and definitions given in EN 1540, EN 13205-1:2014 and EN 13205-2:2014 apply. NOTE With regard to EN 1540, in particular, the
46、following terms are used in this document: respirable fraction, sampling efficiency, personal sampler, static sampler, thoracic fraction, inhalable fraction, measuring procedure, non-random uncertainty, random uncertainty, uncertainty (of measurement), precision and analysis. 4 Symbols and abbreviat
47、ions 4.1 Symbols 4.1.1 Latin COELrelevant occupational exposure limit (OEL) value, mg/m3 m0,1, m0,5andm2nominal masses to be loaded onto collection substrates for selected sampling time t and nominal flow rate Q0at concentrations corresponding to 10 %, 50 % and 200 % of the occupational exposure lim
48、it, mg mHandlbnmass remaining on collection substrate n of subset b after the handling test, mg DIN EN 13205-6:2014-09 EN 13205-6:2014 (E) 6 Clause 6 mLoadbnmass loaded onto collection substrate n of subset b, mg mTranspbnmass remaining on collection substrate n of subset b after the transport test,
49、 mg Clause 5 NMLbnumber of mass loaded collection substrates in subset b Q0nominal flow rate of sampler, l/min sHandlstandard deviation of handling losses of loaded collection substrates, mg Clause 6 sHandlbstandard deviation of handling losses of loaded collection substrates for subset b, mg Clause 6 sTranspstandard deviation of transport losses of loaded collection substrates, mg Clause 5 sTranspbstandard deviation of transport losses of loaded collection substrates for subset b, mg C
