1、 November 2006DIN EN 1338 Corrigendum 1 ICS 93.080.20 Concrete paving blocks Requirements and test methods Corrigendum 1 to English version of DIN EN 1338:2003-08 Pflastersteine aus Beton Anforderungen und Prfverfahren Berichtigung 1 zur englischen Fassung DIN EN 1338:2003-08 Document comprises 4 pa
2、ges No part of this standard may be reproduced without prior permission of DIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany, has the exclusive right of sale for German Standards (DIN-Normen). English price group 99 www.din.de www.beuth.de !,vqf“04.07 9837867T
3、his corrigendum should be filed together with the translation of the standard to which it refers and a corresponding note made on the translation. DIN EN 1338 Corr 1:2006-11 2 This Corrigendum is based on EN 1338:2003/AC:2006 issued by CEN. In the English version of DIN EN 1338:2003-08 the following
4、 corrections are to be made: Re Contents Insert the numbers and headings for subclauses ZA.1, ZA.2 and ZA.3. Re Foreword In the third paragraph, first line, replace “a mandate” with “Mandates M/119 and M/122”. Re Clause 2 Normative references EN ISO 6506-1 replace “(ISO 6506-1: 1999)” by “(ISO 6506-
5、1:2005)” EN ISO 6506-2 replace “(ISO 6506-2: 1999)” by “(ISO 6506-2:2005)” EN ISO 6506-3 replace “(ISO 6506-3: 1999)” by “(ISO 6506-3:2005)” Re Table 1 In the heading “Block thickness”, replace “Mm” with “mm”. Re Table 3 In the heading “Length of gauge”, replace “Mm” with “mm”. Re Table 4.1 In the s
6、econd row, delete “as a mean”. Re Clause 6 Delete “criteria” in the title of this clause. Re Clause 6.3.8.1 At the end of subclause B, add a new paragraph to read: “If the sample and the corresponding production are not accepted, 6.3.7 applies.” Re Table B.1 Move reference to Footnote 2) from “Shape
7、 and dimensions” to “Thickness of facing layer”. Re Figure C.2 In the title of the figure, replace “calibrated” with “graduated”. Re Clause C.5.2 Delete the last line “Check for conformity with the manufacturers values”. Re Clause E.4.1 In the second line, replace “2 000” with “0,2”. DIN EN 1338 Cor
8、r 1:2006-11 3 Re Annex F Amend the heading to read: “Measurement of tensile splitting strength”. Re Clause F.2 In the third paragraph, second line, delete “ed” in “ungrounded” and insert a comma between “rough” and “textured”. Re Clause G.5 In the first line, replace “(100 70) mm” with “100 mm 70 mm
9、”. Re Figure I.3 In the title of the figure, replace “or” with “of”. Re Clause I.4 Convert the NOTE into a normal text and replace “should” with “shall”. Re Clause I.7 In the first line, delete “extra”. Re Annex K In the title, replace “checking” with “the evaluation of”. Re Clause K.1 In the third
10、paragraph, replace “resulting form” with “resulting from”. Re Clause K.3 In the second line, insert: “n = 2“ and “q2= 0,6”. Re Clause K.4 In the first line, replace “should be used” with “may be used”. Re Figure K.1 Replace with the enclosed new figure K.1. Re Clause ZA.1 In the fifth paragraph, ins
11、ert: “related to dangerous substances” after “In addition to 4.2”. Re Clause ZA.2 Amend the title to read: “Procedures for the attestation of conformity”. Insert new subclause heading: ZA.2.1 “System of attestation of conformity”. Re Figures ZA.1 and ZA.2 Replace “2000” with “00”. DIN EN 1338 Corr 1:2006-11 4 Re Figure K.1 Replace figure K.1 with the enclosed figure. Figure K.1 EN 1338 tensile splitting strength