1、November 2016 English price group 16No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 23.020.10; 75.200!%+“2586108www
2、.din.deDIN EN 13616-2Overfill prevention devices for static tanks for liquid fuels Part 2: Overfill prevention devices without a closure device;English version EN 136162:2016,English translation of DIN EN 13616-2:2016-11berfllsicherungen fr ortsfeste Tanks fr flssige Brenn und Kraftstoffe Teil 2: be
3、rfllsicherungen ohne Schlieeinrichtung;Englische Fassung EN 136162:2016,Englische bersetzung von DIN EN 13616-2:2016-11Dispositifs limiteurs de remplissage pour rservoirs statiques pour carburants liquides Partie 2: Dispositifs limiteurs de remplissage sans dispositifs de fermeture;Version anglaise
4、EN 136162:2016,Traduction anglaise de DIN EN 13616-2:2016-11Together with DIN EN 136161:201611 and DIN EN 16657:201611 supersedes DIN EN 13616:200409 and DIN EN 13616 Corrigendum 1:200604See start of applicationSupersedes: see belowwww.beuth.deDTranslation by DIN-Sprachendienst.In case of doubt, the
5、 German-language original shall be considered authoritative.Document comprises 39 pages 10.16 2 A comma is used as the decimal marker. Start of application The start of application of this standard is 2016-11-01. It should be noted that, in Germany, CE conformity marking of construction products wil
6、l be permitted once this standard has been listed in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette) and from the date given therein. For further information, users of this standard should refer to the websites of the European Commission or of the releva
7、nt building authority. The standard which this document replaces, DIN EN 13616:2004-09 and DIN EN 13616 Corrigendum 1:2006-04, may be used in parallel with this standard during a specified transition period where such has been laid down in the Official Journal of the European Union and/or the Bundes
8、anzeiger (German Federal Gazette). National foreword This document (EN 13616-2:2016) has been prepared by Technical Committee CEN/TC 393 “Equipment for storage tanks and for filling stations”, Working Group WG 3 “Overfill prevention devices for static tanks for liquid petroleum fuels” (Secretariat:
9、AFNOR, France). The responsible German body involved in its preparation was DIN-Normenausschuss Tankanlagen (DIN Standards Committee Tank Installations), Working Committee NA 104-02-04 AA berfllsicherungen und Fllstandsanzeiger. Amendments This standard differs from DIN EN 13616:2004-09 and DIN EN 1
10、3616 Corrigendum 1:2006-04 as follows: a) EN 13616:2004 has been subdivided into the following parts, under the general title Overfill prevention devices for static tanks for liquid fuels: Part 1: Overfill prevention devices with closure device Part 2: Overfill prevention devices without closure dev
11、ice b) reference to EN 14116 has been included; c) the parameters regarding explosion safety have been updated; d) the requirements for the equipment of the overfill prevention devices with closure device on static tanks are specified in EN 13616-1; e) the requirements for the equipment of the overf
12、ill prevention devices without closure device on tank vehicles are specified in EN 16657, Tanks for the transport of dangerous goods Transport tank equipment for overfill prevention devices for static tanks. Previous editions DIN EN 13616: 2004-09 DIN EN 13616 Corrigendum 1: 2006-04 DIN EN 13616-2:2
13、016-11 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13616-2 June 2016 ICS 23.020.10 Supersedes EN 13616:2004English Version Overfill prevention devices for static tanks for liquid fuels -Part 2: Overfill prevention devices without a closure device Dispositifs limiteurs de remplissage pour rs
14、ervoirs statiques pour carburants liquides - Partie 2: Dispositifs limiteurs de remplissage sans dispositif de fermeture berfllsicherungen fr ortsfeste Tanks fr flssige Brenn- und Kraftstoffe - Teil 2: berfllsicherungen ohne Schlieeinrichtung This European Standard was approved by CEN on 8 April 201
15、6. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained o
16、n application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENE
17、LEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Ital
18、y, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenu
19、e Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13616-2:2016 EEN 13616-2:2016 (E) 2 Contents Page European foreword . 4 1 Scope 5 2 Normative references 5 3 Terms, definitions and abbreviated terms
20、 5 4 Requirements . 7 4.1 Effectiveness . 7 4.1.1 Signal equal or greater than level L17 4.1.2 Signal below level L1. 7 4.1.3 Functional requirements 7 4.2 Durability 13 4.2.1 Durability at ambient temperature, Tamb. 13 4.2.2 Durability against chemical attack 13 4.2.3 Durability against operational
21、 cycles . 13 4.3 Electro-magnetic compatibility (EMC) . 13 4.4 Fail safe 13 5 Testing 13 5.1 Effectiveness 13 5.1.1 Signal equal or greater than level L1. 13 5.1.2 Signal below level L113 5.1.3 Functional requirements. 14 5.2 Durability 16 5.2.1 Durability at ambient temperature, Tamb. 16 5.2.2 Dura
22、bility against chemical attack 16 5.2.3 Durability against operational cycles . 17 5.3 EMC test . 17 5.4 Fail safe 18 6 Assessment and verification of constancy of performance AVCP . 18 6.1 General . 18 6.2 Type testing 18 6.2.1 General . 18 6.2.2 Test samples, testing and compliance criteria 19 6.2
23、.3 Test reports 19 6.2.4 Shared other party results 19 6.2.5 Cascading determination of the product type results 20 6.3 Factory production control (FPC) 21 6.3.1 General . 21 6.3.2 Requirements 22 6.3.3 Product specific requirements 24 6.3.4 Procedure for modifications 24 6.3.5 One-off products, pre
24、-production products (e.g. prototypes) and products produced in very low quantity 25 7 Marking, labelling and packaging 25 Annex A (informative) Setting of the overfill prevention sensor 27 DIN EN 13616-2:2016-11 EN 13616-2:2016 (E) 3 Annex ZA (informative) Clauses of this European Standard addressi
25、ng the provisions of the EU Construction Products Regulation . 30 ZA.1 Scope and relevant characteristics 30 ZA.2 Procedure for AVCP of overfill prevention devices without closure device . 31 ZA.2.1 System(s) of AVCP . 31 ZA.2.2 Declaration of performance (DoP) . 32 ZA.2.2.1 General . 32 ZA.2.2.2 Co
26、ntent . 32 ZA.2.2.3 Example of DoP . 33 ZA.3 CE marking and labelling . 35 Bibliography . 37 DIN EN 13616-2:2016-11 EN 13616-2:2016 (E) 4 European foreword This document (EN 13616-2:2016) has been prepared by Technical Committee CEN/TC 393 “Equipment for storage tanks and for filling stations”, the
27、secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2016, and conflicting national standards shall be withdrawn at the latest by 2017-07-11. Attention is
28、drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document, together with EN 13616-1 and EN 16657, supersedes EN 13616:2004. This document has b
29、een prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive. For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document. According to EN 13616:2004, the
30、 following fundamental changes are given: splitting of EN 13616:2004; the new EN 13616, under the general title Overfill prevention devices for static tanks for liquid fuels, will consist of the following parts: Part 1: Overfill prevention devices with a closure device; Part 2: Overfill prevention d
31、evices without a closure device. reference to EN 14116; technical parameters regarding explosion updated; the requirements for the equipment of the overfill prevention devices with a closure device on the static tank are fixed in EN 13616-1; the requirements for the equipment of the overfill prevent
32、ion devices without a closure device on the tank vehicle were shifted to EN 16657, Tanks for the transport of dangerous goods Transport tank equipment for overfill prevention devices for static tanks. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the foll
33、owing countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,
34、Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 13616-2:2016-11 EN 13616-2:2016 (E) 5 1 Scope This European Standard contains requirements, test and assessment methods, marking, labelling and packaging applicable to overfill pr
35、evention devices without a closure device. The overfill prevention device without a closure device is usually composed of overfill prevention sensor consists of sensor, electrical interface, mechanical interface, overfill prevention controller according to EN 16657. These overfill prevention devices
36、 are intended to be used in/with underground or above ground, non-pressurized, static tanks designed for liquid fuels. NOTE 1 Liquid fuel means liquids for internal combustion engines, heating/cooling boilers and generators. NOTE 2 In further text, for liquid fuels the term liquid is used. 2 Normati
37、ve references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) ap
38、plies. EN 590, Automotive fuels Diesel Requirements and test methods EN 14879-4:2007, Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Part 4: Linings on metallic components EN 60079-0, Explosive atmospheres Part 0: Eq
39、uipment General requirements (IEC 60079-0) EN 60079-11, Explosive atmospheres Part 11: Equipment protection by intrinsic safety “i (IEC 60079-11) EN 61000-6-2:2005, Electromagnetic compatibility (EMC) Part 6-2: Generic standards Immunity for industrial environments (IEC 61000-6-2:2005) EN 61000-6-3:
40、2007, Electromagnetic compatibility (EMC) Part 6-3: Generic standards Emission standard for residential, commercial and light-industrial environments (IEC 61000-6-3:2006) EN ISO 13849-1, Safety of machinery Safety-related parts of control systems Part 1: General principles for design (ISO 13849-1) E
41、N 16657:2016, Tanks for the transport of dangerous goods Transport tank equipment for overfill prevention devices for static tanks 3 Terms, definitions and abbreviated terms For the purposes of this document, the following terms, definitions and abbreviated terms apply. DIN EN 13616-2:2016-11EN 1361
42、6-2:2016 (E) 6 3.1 overfill prevention device device installed in a supply system, which automatically stops the delivery, preventing the liquid level in the tank exceeding a maximum filling level 3.2 maximum filling level Lmaxpermitted filling level subject to relevant standards and/or any national
43、/regional safety requirements and/or recommendations 3.3 supply system connection hoses, fittings, devices and any fixed pipework through which the liquid is delivered to the static tank from any tank vehicle Note 1 to entry: The supply system includes both tank vehicle and stationary tank equipment
44、. 3.4 tank vehicle vehicle built to carry liquids in integral tanks comprising one or more compartments intended for discharge to static tanks 3.5 level L1filling level at which the sensor of the overfill prevention device provides an activation signal 3.6 sensor liquid level detection device mounte
45、d in a tank for detecting liquid at a predetermined level 3.7 permissive signal causing the permission of a liquid delivery 3.8 non-permissive signal causing the prevention of a liquid delivery 3.9 residual volume amount of liquid which is in the supply system at the moment of shutdown/closure 3.10
46、interface point of transfer of specified information 3.11 PID Product Identification Device DIN EN 13616-2:2016-11 EN 13616-2:2016 (E) 7 3.12 Tambambient temperature 3.13 Tliqliquid temperature 4 Requirements 4.1 Effectiveness 4.1.1 Signal equal or greater than level L1To ensure the effectiveness of
47、 the overfill prevention device the overfill prevention sensor shall provide a signal showing tank contents are equal or greater than level L1to show a non-permissive state. Functional requirements according to 4.1.3. 4.1.2 Signal below level L1To ensure the effectiveness of the overfill prevention
48、device the overfill prevention sensor shall provide a signal showing tank contents are below level L1to show a permissive state. Functional requirements according to 4.1.3. 4.1.3 Functional requirements 4.1.3.1 Electrical interface 4.1.3.1.1 Power supply The manufacturer shall declare which liquid f
49、uels their overfill prevention sensors are compatible with and according to their flashpoint, define the technical parameters for the electrical supply of the overfill prevention sensor with regard to explosion safety. For overfill prevention sensors intended to be used in explosive atmospheres the technical parameters shall be at least Ex ia IIB T3 according to EN 60079-0 and EN 60079-11 and shall be suitab
