1、October 2015 Translation by DIN-Sprachendienst.English price group 15No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).IC
2、S 91.140.70!%FmW“2357452www.din.deDIN EN 14688Sanitary appliances Wash basins Functional requirements and test methods;English version EN 14688:2015,English translation of DIN EN 14688:2015-10Sanitrausstattungsgegenstnde Waschbecken Funktionsanforderungen und Prfverfahren;Englische Fassung EN 14688:
3、2015,Englische bersetzung von DIN EN 14688:2015-10Appareils sanitaires Lavabos Exigences fonctionnelles et mthodes dessai;Version anglaise EN 14688:2015,Traduction anglaise de DIN EN 14688:2015-10SupersedesDIN EN 14688:200702See start of applicationwww.beuth.deIn case of doubt, the German-language o
4、riginal shall be considered authoritative.DDocument comprises 32 pages 09.15DIN EN 14688:2015-10 2 A comma is used as the decimal marker. Start of application The start of application of this standard is 2015-10-01. It should be noted that, in Germany, CE conformity marking of construction products
5、will be permitted once this standard has been listed in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette) and from the date given therein. For further information, users of this standard should refer to the websites of the European Commission or of the rel
6、evant building authority. The standard which this document replaces, DIN EN 14688:2007-02, may be used in parallel with this standard during a specified transition period where such has been laid down in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette). N
7、ational foreword This document (EN 14688:2015) has been prepared by Technical Committee CEN/TC 163 “Sanitary appliances” (Secretariat: UNI, Italy). The responsible German body involved in its preparation was the DIN-Normenausschuss Wasserwesen (DIN Standards Committee Water Practice), Working Commit
8、tee NA 119-05-18-01 UA Waschtische, Sitzwasch-becken, Klosetts, Urinale. Amendments This standard differs from DIN EN 14688:2007-02 as follows: a) in Clause 3 “Terms and definitions”, “3.4 product type” has been added; b) Clause 6 “Dangerous substances” has been added; c) Clause 7 “Marking and produ
9、ct designation” has been modified; d) the former Clause 7 “Evaluation of conformity” has been replaced by Clause 8 “Assessment and verification of constancy of performance AVCP”; e) Annex ZA “Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation” (Reg
10、ulation (EU) No 305/2011) has been updated. Previous editions DIN 1386-1: 1970-02, 1972-06 DIN EN 14688: 2007-02 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 14688 July 2015 ICS 91.140.70 Supersedes EN 14688:2006English Version Sanitary appliances - Wash basins - Functional requirements and
11、test methods Appareils sanitaires - Lavabos - Exigences fonctionnelles et mthodes dessai Sanitrausstattungsgegenstnde - Waschbecken - Funktionsanforderungen und Prfverfahren This European Standard was approved by CEN on 19 June 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regu
12、lations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN memb
13、er. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. C
14、EN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
15、 Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in
16、any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14688:2015 EEN 14688:2015 (E) 2 Contents Page European foreword .3 1 Scope 4 2 Normative references 4 3 Terms and definitions .4 4 Requirements .7 4.1 Load resistance7 4.2 Draining of water7 4.3 Resistance to temperat
17、ure changes 7 4.4 Resistance to chemicals and staining agents 7 4.5 Surface stability .7 4.6 Cleanability .7 4.7 Protection against overflowing 7 4.8 Durability 8 5 Test methods 8 5.1 General 8 5.2 Load resistance8 5.3 Draining of water. 10 5.4 Resistance to temperature changes . 10 5.5 Resistance t
18、o chemicals and staining agents . 11 5.6 Resistance to scratching . 13 5.7 Resistance to abrasion 15 5.8 Cleanability 17 5.9 Determination of flow rate of overflow . 17 6 Dangerous substances 17 7 Marking and product designation . 17 8 Assessment and verification of constancy of performance AVCP 18
19、8.1 General . 18 8.2 Type testing . 19 8.3 Factory production control (FPC) . 20 Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation . 22 Bibliography . 30 DIN EN 14688:2015-10 EN 14688:2015 (E) 3 European foreword This docume
20、nt (EN 14688:2015) has been prepared by Technical Committee CEN/TC 163 “Sanitary appliances”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2016
21、and conflicting national standards shall be withdrawn at the latest by April 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. Thi
22、s document supersedes EN 14688:2006. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of the EU Construction Products Regulation. For relationship with EU Construction Products Regulat
23、ion, see informative Annex ZA, which is an integral part of this document. Since the latest edition of EN 14688, the most significant technical changes are the following: a) introduction of the term “product type”; b) introduction of the clause “Dangerous substances”; c) modification of the marking
24、of products; d) replacement of the clause “Evaluation of conformity” by “Assessment and verification of constancy of performance - AVCP” and replacement of Annex ZA by a new one in accordance with provisions of Regulation 305/2011/EU. According to the CEN-CENELEC Internal Regulations, the national s
25、tandards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania
26、, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 14688:2015-10 EN 14688:2015 (E) 4 1 Scope This European Standard specifies the functional requirements and test methods for wash basins for domes
27、tic purposes. NOTE 1 For the purposes of this standard the term “domestic purposes” includes use in hotels, accommodation for students, hospitals and similar buildings, except when special medical provisions are required. NOTE 2 All drawings are examples only. The shape of the appliance is left to t
28、he discretion of the manufacturer. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the refer
29、enced document (including any amendments) applies. EN ISO 6506-1, Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1) ISO 9352, Plastics - Determination of resistance to wear by abrasive wheels 3 Terms and definitions For the purposes of this document, the following terms a
30、nd definitions apply. 3.1 wash basin sanitary appliance primarily intended for washing the upper parts of the body, with one or more bowls, each with a waste outlet hole, with or without overflow and with or without taphole(s) Note 1 to entry: The various types of wash basins are differentiated by t
31、he methods of mounting. The main types are given in the definitions that follow. 3.1.1 wall-hung wash basin wash basin attached directly to a wall Note 1 to entry: See Figures 1 and 2. Figure 1 Wall-hung wash basin with overflow Figure 2 Wall-hung wash basin without overflow DIN EN 14688:2015-10 EN
32、14688:2015(E)5 3.1.2 bracket-mounted wash basin wash basin supported on brackets which are fixed to a wall Note 1 to entry: See Figure 3. Figure 3 Bracket-mounted wash basin 3.1.3 pedestal wash basin wash basin supported by a floor mounted pedestal Note 1 to entry: See Figure 4. Figure 4 Pedestal wa
33、sh basin 3.1.4 vanity wash basin wash basin installed into a vanity top Note 1 to entry: See Figure 5. Note 2 to entry: The bowl(s) may be mounted in different ways: a) the rim of the wash basin rests on the vanity top (inset wash basin); b) the front of the basin protrudes beyond the front edge of
34、the vanity top (semi-recessed wash basin); c) the rim of the wash basin butts against the underside of the vanity top (wash basin mounted beneath a vanity top); d) the bottom of the wash basin rests on the vanity top (vessel wash basin). DINEN 14688:2015-10EN 14688:2015 (E) 6 Figure 5 Vanity top was
35、h basins 3.1.5 corner wash basin wash basin intended to be installed in a 90 wall corner and to be attached to both walls 3.2 handrinse basin wash basin with a width of 530 mm, intended for hand washing only 3.3 multi-layer wash basin wash basin consisting of two or more layers of material 3.4 produ
36、ct type construction product with a set of representative performance levels or classes in relation to its Essential Characteristics, produced using a given combination of raw materials or other elements in a specific production process DIN EN 14688:2015-10 EN 14688:2015 (E) 7 4 Requirements 4.1 Loa
37、d resistance When tested in accordance with 5.2, wall-hung wash basins shall not crack, be broken or show permanent distortion. 4.2 Draining of water When tested in accordance with 5.3, all water shall drain away. 4.3 Resistance to temperature changes When wash basins are tested in accordance with 5
38、.4, they shall not show defects, such as cracks or delamination which influences the intended use. Experience has shown that wash basins made of glazed ceramics, stainless steel, enamelled steel and glass comply with this requirement. 4.4 Resistance to chemicals and staining agents When used as inte
39、nded, any functional surface shall be resistant to household chemicals and cleansing agents recommended by the manufacturer. When tested in accordance with 5.5, wash basins shall not show any permanent surface deterioration, such as stains or deterioration not removable with water or abrasive agent.
40、 Experience has shown that wash basins made of glazed ceramics, stainless steel and enamelled steel comply with this requirement. 4.5 Surface stability This requirement is applicable only to multi-layer wash basins to ensure the stability of the top layer. When tested in accordance with 5.6, any scr
41、atch shall not exceed 0,1 mm and/or the total depth of the top layer whichever is the least. When tested in accordance with 5.7, the top layer of the test specimen shall not be abraded through. Experience has shown that wash basins made of glazed ceramics and enamelled steel comply with these requir
42、ements. 4.6 Cleanability When tested in accordance with 5.8, wash basins shall have smooth and readily cleansed non-absorbent functional surfaces which are free from acute internal corners which would be difficult to clean, i.e. surfaces intended to or likely to come into contact with water during u
43、se. Experience has shown that wash basins manufactured from plastics materials, enamelled steel/cast iron, stainless steel, glazed ceramics and glass, designed and constructed without acute internal corners, satisfy this requirement. 4.7 Protection against overflowing 4.7.1 Wash basins with overflow
44、 Every wash basin shall be protected against overflowing. DIN EN 14688:2015-10 EN 14688:2015 (E) 8 When tested in accordance with 5.9, the flow rate of a single overflow shall not be less than the values given in Table 1. Table 1 Flow rates of overflow Overflow class Overflow rate l/s CL 25 0,25 CL
45、20 0,20 CL 15 0,15 CL 10 0,10 CL 00 See 4.7.2. In two-bowl wash basins, it is permitted to have only one overflow, if the overflowing from one bowl to the other is ensured. 4.7.2 Wash basins without overflow A wash basin with a non-closable outlet or a floor gully may also be used as a protection ag
46、ainst overflowing. In this case the wash basin is considered to be class CL 00. 4.8 Durability Products conforming with the requirements of 4.1 to 4.7 are deemed to be durable. 5 Test methods 5.1 General All tests may be carried out on the same sample wash basin. 5.2 Load resistance Install the wash
47、 basin to be tested in a horizontal position in accordance with the manufacturers instructions onto smooth surface(s) with a layer of mortar or other facing material used for pointing between the back of wash basin and the smooth surface. Gradually apply a force of (1,50 0,01) kN on top of a wooden
48、beam with a cross section of 100 mm x 100 mm positioned in accordance with Figure 6. Allow the force to remain in position for a period of 1 h. DIN EN 14688:2015-10 EN 14688:2015 (E) 9 Key a) installation of wash basins b) testing a “standard-type” wash basin 4 wall c) testing a two-bowl wash basin
49、5 threaded rod, nut and flexible washer (maximum torque5 Nm) d) testing a non-symmetrical wash basin 6 geometric centre of bowl e) testing a corner wash basin 7 geometric centre of the left bowl 1 force (1,50 0,01) kN 8 geometric centre of the right bowl 2 wooden beam with cross-section 100 mm x 100 mm of adequate length 9 centre of the contact area from exterior edge of wash basin through thegeometriccentre(s)ofthebowl(s) 10 load point Figure 6 Test arrangements Record any failure to comply with 4.1. Distortions at the points of
