1、February 2016 English price group 21No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 53.060!%LL1“2414114www.din.deDI
2、N EN 1755Industrial Trucks Safety requirements and verification Supplementary requirements for operation in potentially explosive atmospheres;English version EN 1755:2015,English translation of DIN EN 1755:2016-02Flurfrderzeuge Sicherheitsanforderungen und Verifizierung Zustzliche Anforderungen fr d
3、en Einsatz in explosionsgefhrdeten Bereichen;Englische Fassung EN 1755:2015,Englische bersetzung von DIN EN 1755:2016-02Chariots de manutention Prescriptions de scurit et vrification Prescriptions supplmentaires pour le fonctionnement en atmosphres explosibles;Version anglaise EN 1755:2015,Traductio
4、n anglaise de DIN EN 1755:2016-02SupersedesDIN EN 1755:2013-08www.beuth.deDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.Document comprises 53 pages 01.16 DIN EN 1755:2016-02 2 A comma is used as the decimal marker. National forewo
5、rd This standard includes safety requirements. This document (EN 1755:2015) has been prepared by Technical Committee CEN/TC 150 “Industrial trucks Safety” (Secretariat: BSI, United Kingdom). The responsible German body involved in its preparation was DIN-Normenausschuss Maschinenbau (DIN Standards C
6、ommittee Mechanical Engineering), Working Committee NA 060-22-42-01 AK Ex-Schutz von Flurfrderzeugen of Section Frdertechnik. Representatives of manufacturers and users of industrial trucks, and of the employers liability insurance associations contributed to this standard. This standard contains sp
7、ecifications giving detail to the essential requirements of the ATEX Directive 94/9/EC and those set out in Annex I of the “Machinery Directive”, Directive 2006/42/EC, and which apply to machines that are either first placed on the market or commissioned within the EEA. This standard serves to facil
8、itate proof of compliance with the essential requirements of these directives. Once this standard is cited in the Official Journal of the European Union, it is deemed a “harmonized” standard and thus, a manufacturer applying this standard may assume compliance with the requirements of the Machinery
9、Directive (“presumption of conformity”). The European Standards referred to in Clause 2 and in the Bibliography of the EN have been published as the corresponding DIN EN or DIN EN ISO Standards with the same number. Where the International Standards referred to are not also DIN ISO Standards with th
10、e same number, there are no national standards available. Amendments This standard differs from DIN EN 1755:2013-08 as follows: a) some structural amendments have been made; b) technical changes have been made; A comprehensive overview of the amendments made to the previous edition is given in Annex
11、 F. Previous editions DIN EN 1755: 2000-06, 2010-02, 2013-08 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1755 November 2015 ICS 53.060 Supersedes EN 1755:2000+A2:2013English Version Industrial Trucks - Safety requirements and verification - Supplementary requirements for operation in potent
12、ially explosive atmospheres Chariots de manutention - Prescriptions de scurit et vrification - Prescriptions supplmentaires pour le fonctionnement en atmosphres explosibles Flurfrderzeuge Einsatzinexplosionsgefhrdeten BereichenThis European Standard was approved by CEN on 24 July 2015. CEN members a
13、re bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to
14、 the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management C
15、entre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithu
16、ania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1
17、000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1755:2015 E- SicherheitsanforderungenundVerifizierung - Zustzliche Anforderungenfrden EN 1755:2015(E)2 Contents Page European foreword . 3 Introduction 4 1 Scope 6 2
18、 Normative references 6 3 Terms and definitions . 8 4 Safety requirements and/or protective measures 11 4.1 General . 11 4.2 Hot surfaces 12 4.3 Safety shutdown . 13 4.4 Mechanically generated sparks 13 4.5 Electrical system . 14 4.6 Internal combustion engines . 17 4.7 Electrostatic risks 17 4.8 Re
19、quirements for brakes, clutches and couplings . 21 4.9 Requirements for pneumatic systems 23 4.10 Category 3G trucks equipped with restricted breathing enclosures “nR” and gas detection systems . 23 4.11 Flammability of non-metallic materials 25 5 Verification of safety requirements and/or protectiv
20、e measures . 26 5.1 Determination of the maximum surface temperatures . 26 5.2 Measurement of circuit resistance and capacitance . 30 6 Information for use . 32 6.1 General . 32 6.2 Instruction handbook . 32 6.3 Marking 34 6.4 Warning labels 35 Annex A (normative) List of significant hazards 36 Anne
21、x B (informative) Relationship between zones (area classification) and truck categories . 37 Annex C (informative) Typical example of cladding of load handling devices . 38 Annex D (informative) Typical examples of non-conductive surface areas according to 4.7.3.1 39 Annex E (normative) Requirements
22、 for transmission belts in accordance with ISO 9563 or ISO 1813. 42 Annex F (informative) Significant technical changes between this document and the previous edition of this European Standard . 43 Annex G (informative) Warning labels for trucks with restricted breathing enclosure(s) . 47 Annex ZA (
23、informative) Relationship between this European Standard and the Essential Requirements of EU Directive 94/9/EC . 48 Bibliography . 51 DIN EN 1755:2016-02 EN 1755:2015 (E) 3 European foreword This document (EN 1755:2015) has been prepared by Technical Committee CEN/TC 150 “Industrial Trucks - Safety
24、”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2016, and conflicting national standards shall be withdrawn at the latest by November 2017. Attentio
25、n is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 1755:2000+A2:2013. This document has been prepared under a mandate
26、 given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. Informative Annex F provides details of significant t
27、echnical changes between this document and the previous edition: EN 1755:2000+A2:2013. This document is one of a series of European Standards for the safety of industrial trucks which are listed in 4.1 and in the Bibliography. According to the CEN-CENELEC Internal Regulations, the national standards
28、 organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxemb
29、ourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 1755:2016-02 EN 1755:2015 (E) 4 Introduction This standard is a type-C standard as stated in EN ISO 12100. The machinery concerned and the extent to whic
30、h hazards, hazardous situations and hazardous events are covered, are indicated in the scope of this standard. When provisions of this type C standard are different from those which are stated in type A or B standards, the provisions of this type C standard take precedence over the provisions of the
31、 other standards for machines that have been designed and built in accordance with the provisions of this type C standard. This standard (EN 1755:2015) covers safety requirements and their verification for industrial trucks as defined in ISO 5053-1 that are not covered exhaustively by: EN 1459; EN 1
32、526; EN 1757-3; EN ISO 3691-1; EN ISO 3691-5; EN ISO 3691-6; NOTE The above-mentioned standards are listed in the Bibliography or in Clause 2. Assessment of hazards The industrial truck needs to be designed in such a way that it is fit for its purpose or function and can be adjusted and maintained w
33、ithout putting persons at risk when used under the conditions foreseen (e.g. explosive atmospheres) by the manufacturer. In order to properly design an industrial truck and to cover all specific safety requirements, the manufacturer will have to identify the hazards that apply to the industrial truc
34、k and carry out a risk assessment. The manufacturer will then need to design and construct the industrial truck taking this assessment into account. The aim of this procedure is to eliminate the risk of accidents throughout the foreseeable lifetime of the machinery, including the phases of assemblin
35、g and dismantling where risks of accidents could also arise from foreseeable abnormal situations. In selecting the most appropriate methods, the manufacturer will need to apply the following principles, in the order given here: eliminate or reduce risks as far as possible by design (inherently safe
36、machinery design and construction); take the necessary protective measures in relation to risks that cannot be eliminated by design; inform users of any shortcoming of the protective measures adopted; indicate whether any particular training is required; specify any need to provide personal protecti
37、on equipment; refer to the appropriate users document for proper operating instructions. DIN EN 1755:2016-02 EN 1755:2015 (E) 5 Industrial trucks need to be designed to prevent foreseeable misuse wherever possible, if such would engender risk. In other cases, the instructions will need to draw the u
38、sers attention to ways shown by experience in which the machinery ought not to be used. This standard (EN 1755:2015) does not repeat all the technical rules which are state-of-the art and which are applicable to the material used to construct the industrial truck. Reference will also need to be made
39、 to EN ISO 12100. DIN EN 1755:2016-02 EN 1755:2015 (E) 6 1 Scope This European Standard applies to self-propelled and pedestrian propelled manual and semi-manual industrial trucks as defined in ISO 5053-1 including their load handling devices and attachments (hereafter referred to as trucks) intende
40、d for use in potentially explosive atmospheres. NOTE 1 Attachments mounted on the load carrier or on fork arms which are removable by the user are not considered to be a part of the truck. This European Standard specifies supplementary technical requirements for the prevention of the ignition of an
41、explosive atmosphere of flammable gases, vapours, mists or dusts by industrial trucks of equipment group II and equipment category 2G, 3G, 2D or 3D. NOTE 2 The relationship between an equipment category (hereafter referred to as category) and the corresponding zone (area classification) is shown in
42、informative Annex B. This European Standard does not include: trucks of equipment group I; trucks of equipment group II, equipment category 1; trucks intended for use in potentially explosive atmospheres with hybrid mixtures; protective systems. This European Standard is not applicable to trucks int
43、ended for use in potentially explosive atmospheres of carbon disulphide (CS2), carbon monoxide (CO) and/or ethylene oxide (C2H4O) due to the special properties of these gases. This standard is applicable to trucks intended for use in atmospheres with an ambient temperature range of - 20 C to +40 C,
44、i.e. trucks built in accordance with this European Standard will be satisfactory to any service conditions within this range unless otherwise specified. NOTE 3 The ambient temperature range -20 C to +40 C is in line with EN ISO 3691-1. 2 Normative references The following documents, in whole or in p
45、art, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1127-1:2011, Explosive atmospheres - Explosio
46、n prevention and protection - Part 1: Basic concepts and methodology EN 1149-5, Protective clothing - Electrostatic properties - Part 5: Material performance and design requirements EN 1175-1:1998+A1:2010, Safety of industrial trucks - Electrical requirements - Part 1: General requirements for batte
47、ry powered trucks EN 1175-2, Safety of industrial trucks Part 2: Electrical requirements for internal combustion engine powered trucks EN 1175-3, Safety of industrial trucks Part 3: Electrical requirements for the electric power transmission systems of internal combustion engine powered trucks EN 14
48、59, Safety of industrial trucks Self-propelled variable reach trucks DIN EN 1755:2016-02 EN 1755:2015 (E)7 EN 1525, Safety of industrial trucks - Driverless trucks and their systems EN 1757-3, Safety of industrial trucks - Pedestrian controlled manual and semi-manual trucks - Part 3: Platform trucks
49、 EN 1834-1:2000, Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 1: Group II engines for use in flammable gas and vapour atmospheres EN 1834-3, Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 3: Group II engines for use
