DIN EN 16836-3-2017 Communication systems for meters - Wireless mesh networking for meter data exchange - Part 3 Energy profile specification dedicated application layer German ver.pdf

上传人:confusegate185 文档编号:673235 上传时间:2018-12-27 格式:PDF 页数:18 大小:1.14MB
下载 相关 举报
DIN EN 16836-3-2017 Communication systems for meters - Wireless mesh networking for meter data exchange - Part 3 Energy profile specification dedicated application layer German ver.pdf_第1页
第1页 / 共18页
DIN EN 16836-3-2017 Communication systems for meters - Wireless mesh networking for meter data exchange - Part 3 Energy profile specification dedicated application layer German ver.pdf_第2页
第2页 / 共18页
DIN EN 16836-3-2017 Communication systems for meters - Wireless mesh networking for meter data exchange - Part 3 Energy profile specification dedicated application layer German ver.pdf_第3页
第3页 / 共18页
DIN EN 16836-3-2017 Communication systems for meters - Wireless mesh networking for meter data exchange - Part 3 Energy profile specification dedicated application layer German ver.pdf_第4页
第4页 / 共18页
DIN EN 16836-3-2017 Communication systems for meters - Wireless mesh networking for meter data exchange - Part 3 Energy profile specification dedicated application layer German ver.pdf_第5页
第5页 / 共18页
点击查看更多>>
资源描述

1、February 2017 English price group 11No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 33.200; 35.100.70!%anq“2627578w

2、ww.din.deDIN EN 16836-3Communication systems for meters Wireless mesh networking for meter data exchange Part 3: Energy profile specification dedicated application layer;English version EN 168363:2016,English translation of DIN EN 16836-3:2017-02Kommunikationssysteme fr Zhler Drahtloses MeshNetzwerk

3、 fr den Zhlerdatenaustausch Teil 3: EnergieProfilspezifikation der speziellen Anwendungsschicht;Englische Fassung EN 168363:2016,Englische bersetzung von DIN EN 16836-3:2017-02Systmes de communication des compteurs Rseau maill sans fil pour lchange de donnes de compteurs Partie 3: Spcifications de l

4、a couche application spciale Kommunikationssysteme fr Zhler - Drahtloses Mesh-Netzwerk fr den Zhlerdatenaustausch - Teil 3: Energie-Profilspezifikation der speziellen Anwendungsschicht This European Standard was approved by CEN on 3 September 2016. CEN members are bound to comply with the CEN/CENELE

5、C Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or

6、to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the offic

7、ial versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,

8、Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of ex

9、ploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16836-3:2016 EEN 16836-3:2016 (E) 2 Contents Page European foreword . 3 Introduction 4 1 Scope 5 2 Normative references 5 3 Terms and definitions . 5 4 Requirements . 5 4.1 General 5 4.2 Cluster library

10、6 Table 1 Reference to ZigBee Cluster Library 075123 Rev 04 . 6 4.3 Smart energy profile 7 Table 2 ZigBee Smart Energy Profile Specification 075356 Rev 19 Reference . 7 4.4 Over the air upgrade . 16 DIN EN 16836-3:2017-02 EN 16836-3:2016 (E) 3 European foreword This document (EN 16836-3:2016) has be

11、en prepared by Technical Committee CEN/TC 294 “Communication systems for meters”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2017, and conflicting

12、 national standards shall be withdrawn at the latest by May 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document has been prepared und

13、er a mandate given to CENby the European Commission and the European Free Trade Association. According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus,

14、Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kin

15、gdom. DIN EN 16836-3:2017-02 EN 16836-3:2016 (E) 4 Introduction The EN 16836 series of standards details requirements for gas meters, water meters and heat meters that can interoperate with products in a mesh network that conform to this standard through a smart energy profile application layer. Thi

16、s standard refers to documents made freely available by the ZigBee Alliance, an organization which manages a mesh network specification (see www.zigbee.org/about/centc294). This series of standards specifies how a mesh networking radio specification applies within the scope of European standards at

17、the application layer, networking layer and also medium access control/physical layer (MAC/PHY). EN 16836 consists of the following parts: EN 16836-1, Communication systems for meters Wireless mesh networking for meter data exchange Part 1: Introduction and standardization framework EN 16836-2, Comm

18、unication systems for meters Wireless mesh networking for meter data exchange Part 2: Networking layer and stack specification EN 16836-3, Communication systems for meters Wireless mesh networking for meter data exchange Part 3: Energy profile specification dedicated application layer This standard

19、series is created in compliance with the terms of a memorandum of understanding (MOU) between CEN/CELELEC and the ZigBee Alliance. The principles underpinning the relationship between CEN/CENELEC and the ZigBee Alliance are described in the Consortium Bridge procedure. A copy of the MOU and the Cons

20、ortium Bridge can be obtained from CEN/CENELEC. NOTE The term ZigBee and the ZigBee Logo are registered trademarks of the ZigBee Alliance and their use is subject to the conditions of membership. DIN EN 16836-3:2017-02 EN 16836-3:2016 (E) 5 1 Scope This European Standard specifies requirements for t

21、he dedicated application layer of a communication protocol for the exchange of data from metering devices to other devices within a mesh network. This standard makes reference to a number of documents whereby core requirements are specified. This referencing is in compliance with the Bridge Consorti

22、um and additionally the Memorandum of Understanding between the ZigBee Alliance and CEN/CENELEC. The EN 16836 series represents a feature subset of a larger standard and as such not all of the features specified in the referenced documents are specified in this standard, due to some features being o

23、utside the scope of CEN/TC 294. Where this is the case the out of scope feature has either been omitted or specified as excluded. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated refe

24、rences, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 16836-1:2016, Communication systems for meters and remote reading of meters Wireless mesh networking for meter data exchange Part 1: Introduction and s

25、tandardization framework ZigBee Cluster Library 07-5123 Rev 04, April 26, 2010 ZigBee Smart Energy Standard 07-5356 Rev 19, December 3, 2014 OTA Cluster Specification 09-5264 Rev 23, March 12, 2014 NOTE The above ZigBee documents and OTA Cluster Specification can be obtained from can be obtained fro

26、m www.zigbee.org/about/centc294. 3 Terms and definitions For the purposes of this document, the terms, definitions, acronyms and abbreviations given in ZigBee Cluster Library 07-5123 Rev 04, ZigBee Smart Energy Standard 07-5356 Rev 19, and OTA Cluster Specification 09-5264 Rev 23 apply. 4 Requiremen

27、ts 4.1 General The dedicated application layer shall be defined in this standard using the references specified in Tables 1 and 2. This energy profile shall conform to the general framework given in EN 16836-1:2016, the network layer given in EN 16836-1:2016, and the requirements given in 4.2, 4.3,

28、4.4. DIN EN 16836-3:2017-02 EN 16836-3:2016 (E) 6 4.2 Cluster library The requirements given in Table 1 are the basic requirements for this part of EN 16836 and are detailed in the ZigBee Cluster Library 07-5123 Rev 04. Table 1 Reference to ZigBee Cluster Library 075123 Rev 04 Reference Title 1.1 Sc

29、ope and Purpose 1.2 Acronyms and Abbreviations 1.3 Definitions 1.4 Conformance Levels 1.5 References 2.2 Cluster Library Overview 2.2.1 Client/Server Model 2.2.2 Functional Domains 2.2.2.1 General 2.2.2.5 Measurement and Sensing 2.2.2.7 Protocol Interfaces 2.3 Command Frame Formats 2.4 General Comma

30、nd Frames 2.5 Addressing, Types and Enumerations 2.6 Functional Description 3 General Specification 3.2 Basic Cluster 3.3 Power Configuration Cluster 3.5 Identify Cluster 3.6 Groups Cluster 3.8 On/Off Cluster 3.11 Alarms Cluster 3.12 Time Cluster 3.13 RSSI Location Cluster 3.15 Commissioning Cluster

31、 4.5 Pressure Measurement Cluster 4.6 Flow Measurement Cluster 4.7 Relative Humidity Measurement Cluster 9.2 Generic Tunnel cluster DIN EN 16836-3:2017-02 EN 16836-3:2016 (E) 7 4.3 Smart energy profile Table 2 ZigBee Smart Energy Standard 075356 Rev 19 Reference Reference Title 1 Introduction 1.1 Sc

32、ope 1.2 Purpose 1.3 Provisional Features 2 References 2.1 References 2.1.2 External Reference Documents 3 Definitions 3.1 Conformance Levels 3.2 ZigBee Definitions 3.3 Smart Energy Definitions 4 Acronyms and Abbreviations 5 Chapter 5 Profile Description 5.1 5.1 A ZigBee Smart Energy Network 5.2 5.2

33、ZigBee Stack Profile 5.2.1 MAC Data Polling (NMLE_Requests) 5.2.2 Application Level Queries 5.2.3 ZigBee Coordinator and Trust Center Recommendations 5.3 5.3 Startup Attribute Set (SAS) 5.3.1 Startup Parameters 5.3.2 Join Parameters 5.3.3 Security Parameters 5.3.4 End Device Parameters 5.3.5 Link St

34、atus Parameters 5.3.6 Concentrator Parameters 5.3.7 APS Transport Parameters 5.3.8 APS Fragmentation Parameters 5.3.9 Binding Parameters 5.4 5.4 Smart Energy Profile Security 5.4.1 Joining with Preinstalled Trust Center Link Keys 5.4.1.1 Best Practices for Tracking Registered Devices 5.4.1.2 Best Pr

35、actice for Coordinator Permit Joining Broadcasts 5.4.2 Re-Joining a Secured Network 5.4.2.1 Rejoining Node Operation 5.4.2.2 Trust Center Operation 5.4.3 Devices Leaving the Network DIN EN 16836-3:2017-02 EN 16836-3:2016 (E) 8 Reference Title 5.4.4 Updating the Network Key 5.4.5 Updating the Link Ke

36、y 5.4.5.1 Network Joining and Registration Diagram 5.4.6 Cluster Usage of Security Keys 5.4.7 Key Establishment Related Security Policies 5.4.7.1 Joining 5.4.7.2 Trust Center 5.4.7.3 During Joining 5.4.7.4 After Joining 5.4.8 Security Best Practices 5.4.8.1 Out of Band Pre-Configured Link Key Proces

37、s 5.5 5.5 Commissioning 5.5.1 Forming the Network (Start-up Sequence) 5.5.2 Support for Commissioning Modes 5.5.3 Commissioning Documentation Best Practices 5.5.4 Commissioning Procedure for Different Network Types 5.5.4.1 Commissioning for Neighbourhood Area Network or Sub-metering 5.5.4.2 Commissi

38、oning for Home Area Network. 5.5.5 ZigBee Smart Energy Joining, Service Discovery, and Device Binding Requirements 5.5.5.1 PAN Auto-Joining State 5.5.5.2 Service Discovery State 5.5.5.3 Device Steady State 5.5.5.4 Rejoin and Recovery State 5.5.5.5 ESI Specific Considerations 5.6 5.6 Federated Trust

39、Centre Application Guidelines 5.7 5.7 Multiple ESI Application Guidelines 5.7.1 Overview 5.7.2 Device Behaviour 5.7.2.1 Service Discovery in Multi ESI Environments 5.7.2.2 Determining the Most Authoritative Time Source 5.7.2.3 Periodic Time Source Checking During Normal Operation 5.7.2.4 Invalid Tim

40、e and Interim Time Sources 5.7.2.5 Handling SE Commands from Multiple ESIs. 5.7.2.6 Handling Multiple Uncoordinated Back-end Systems 5.8 5.8 Other Smart Energy Profile Requirements and Best Practices 5.8.1 Preferred Channel Usage 5.8.2 Broadcast Policy 5.8.3 Frequency Agility 5.8.4 Key Updates DIN E

41、N 16836-3:2017-02 EN 16836-3:2016 (E) 9 Reference Title 5.9 5.9 Coexistence and Interoperability with HA Devices 5.10 5.10 Device Descriptions 5.11 5.11 ZigBee Cluster Library (ZCL) 5.12 5.12 Cluster List and IDs 5.12.1 ZCL General Clusters 5.12.1.1 ZCL Time Cluster and Time Synchronization 5.12.1.2

42、 Transaction Sequence Numbers 5.13 Coexistence with devices using other Profiles 6 Device Specifications 6.1 6.1 Common Clusters 6.1.1 Optional Support for Clusters with Reporting Capability 6.1.2 Manufacturer-Specific Clusters 6.1.3 Cluster Usage Restrictions 6.1.4 Identify Cluster Best Practices 6

43、.1.5 Inter-PAN Communication 6.2 6.2 Feature and Function Description. 6.3 6.3 Smart Energy Devices 6.3.1 Energy Service Interface 6.3.1.1 Supported Clusters 6.3.1.2 Supported Features and Functions 6.3.2 Metering Device 6.3.2.1 Supported Clusters 6.3.2.2 Supported Features and Functions 6.3.5 Load

44、Control Device 6.3.5.1 Supported Clusters 6.3.5.2 Supported Features and Functions 6.3.6 Range Extender Device 6.3.6.1 Supported Clusters 6.3.6.2 Supported Features and Functions 6.3.7 Smart Appliance Device 6.3.7.1 Supported Clusters 6.3.7.2 Supported Features and Functions 6.3.8 Prepayment Termina

45、l Device 6.3.8.1 Supported Clusters 6.3.8.2 Supported Features and Functions 6.3.9 Physical Device 6.3.9.1 Supported Clusters 6.3.9.2 Supported Features and Functions 6.3.10 remote Communications Device 6.3.10.1 Supported Clusters DIN EN 16836-3:2017-02 EN 16836-3:2016 (E) 10 Reference Title 6.3.10.

46、2 Supported Features and Functions Annex A Annex A Candidate ZCL Material for Use with This Profile A.1 A.1 New Status Enumeration A.2 A.2 New Attribute Reporting Status Indication A.2.1 Attribute Reporting Status Attribute Annex B Enhanced Inter-PAN Transmission Mechanism B.1 B.1 Scope and Purpose

47、B.2 B.2 General Description B.2.1 What Enhanced Inter-PAN Transmission Does B.3 B.3 Service Specification B.3.1 The INTRP-DATA.request Primitive B.3.1.1 Semantics of the Service Primitive B.3.1.2 When Generated B.3.1.3 Effect on Receipt B.3.2 The INTRP-DATA.confirm Primitive B.3.2.1 Semantics of the

48、 Service Primitive B.3.2.2 When Generated B.3.2.3 Effect on Receipt B.3.3 The INTRP-DATA.indication Primitive B.3.3.1 Semantics of the Service Primitive B.3.3.2 When Generated B.3.3.3 Effect on Receipt B.3.4 Qualifying and Testing of Inter-Pan Messages B.4 B.4 Frame Formats B.5 B.5 Frame Processing

49、B.5.1 Enhanced Inter-PAN Transmission B.5.2 Enhanced Inter-PAN Reception B.6 B.6 Initiating and Enhanced Inter-PAN Interaction B.7 B.7 Best Practices B.8 B.8 Security Requirements Annex C Key Establishment Cluster C.1 C.1 Scope and Purpose C.2 C.2 General Description C.2.1 Introduction C.2.2 Security Credentials C.2.3 Network Security C.2.4 Key Establishment C.2.5 Symmetric Key Key Establishment DIN EN 16836-3:2017-02 EN 16836-3:2016 (E) 11 Reference Title C.2.6 Public Key Key Establishment C.2.7 General Exc

展开阅读全文
相关资源
  • DIN EN 818-7-2008 Short link chain for lifting purposes - Safety - Part 7 Fine tolerance hoist chain Grade T (Types T DAT and DT)(includes Amendment A1 2008) Ge.pdfDIN EN 818-7-2008 Short link chain for lifting purposes - Safety - Part 7 Fine tolerance hoist chain Grade T (Types T DAT and DT)(includes Amendment A1 2008) Ge.pdf
  • DIN EN 1677-3-2008 Components for slings - Safety - Part 3 Forged steel self-locking hooks Grade 8(includes Amendment A1 2008) English version of DIN EN 1677-3 .pdfDIN EN 1677-3-2008 Components for slings - Safety - Part 3 Forged steel self-locking hooks Grade 8(includes Amendment A1 2008) English version of DIN EN 1677-3 .pdf
  • DIN EN 1677-2-2008 Components for slings - Safety - Part 2 Forged steel lifting hooks with latch Grade 8(includes Amendment A1 2008) English version of DIN EN 1.pdfDIN EN 1677-2-2008 Components for slings - Safety - Part 2 Forged steel lifting hooks with latch Grade 8(includes Amendment A1 2008) English version of DIN EN 1.pdf
  • DIN EN 1670-2007 Building hardware - Corrosion resistance - Requirements and test methods English version of DIN EN 1670 2007-06《建筑五金器具 耐腐蚀 要求和试验方法》.pdfDIN EN 1670-2007 Building hardware - Corrosion resistance - Requirements and test methods English version of DIN EN 1670 2007-06《建筑五金器具 耐腐蚀 要求和试验方法》.pdf
  • DIN EN 1656-2010 Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and.pdfDIN EN 1656-2010 Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and.pdf
  • DIN EN 1230-2-2018 Paper and board intended to come into contact with foodstuffs - Sensory analysis - Part 2 Off-flavour (taint) German version EN 1230-2 2009《用.pdfDIN EN 1230-2-2018 Paper and board intended to come into contact with foodstuffs - Sensory analysis - Part 2 Off-flavour (taint) German version EN 1230-2 2009《用.pdf
  • DIN EN 1176-7-2008 Playground equipment and surfacing - Part 7 Guidance on installation inspection maintenance and operation English version of DIN EN 1176-7 20.pdfDIN EN 1176-7-2008 Playground equipment and surfacing - Part 7 Guidance on installation inspection maintenance and operation English version of DIN EN 1176-7 20.pdf
  • DIN EN 1176-5-2008 Playground equipment and surfacing - Part 5 Additional specific safety requirements and test methods for carousels English version of DIN EN .pdfDIN EN 1176-5-2008 Playground equipment and surfacing - Part 5 Additional specific safety requirements and test methods for carousels English version of DIN EN .pdf
  • DIN EN 1159-1-2007 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 1 Determination of thermal expansion (includes Corrigendu.pdfDIN EN 1159-1-2007 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 1 Determination of thermal expansion (includes Corrigendu.pdf
  • DIN EN 1093-4-2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4 Capture efficiency of an exhaust system - Tracer m.pdfDIN EN 1093-4-2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4 Capture efficiency of an exhaust system - Tracer m.pdf
  • 猜你喜欢
    相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > DIN

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1