DIN EN 60332-3-25-2010 Tests on electric and optical fibre cables under fire conditions - Part 3-25 Test for vertical flame spread of vertically-mounted bunched wires or cables - C.pdf

相关资源

DIN EN 818-7-2008 Short link chain for lifting purposes - Safety - Part 7 Fine tolerance hoist chain Grade T (Types T DAT and DT)(includes Amendment A1 2008) Ge.pdf

DIN EN 1677-3-2008 Components for slings - Safety - Part 3 Forged steel self-locking hooks Grade 8(includes Amendment A1 2008) English version of DIN EN 1677-3 .pdf

DIN EN 1677-2-2008 Components for slings - Safety - Part 2 Forged steel lifting hooks with latch Grade 8(includes Amendment A1 2008) English version of DIN EN 1.pdf

DIN EN 1670-2007 Building hardware - Corrosion resistance - Requirements and test methods English version of DIN EN 1670 2007-06《建筑五金器具 耐腐蚀 要求和试验方法》.pdf

DIN EN 1656-2010 Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and.pdf

DIN EN 1230-2-2018 Paper and board intended to come into contact with foodstuffs - Sensory analysis - Part 2 Off-flavour (taint) German version EN 1230-2 2009《用.pdf

DIN EN 1176-7-2008 Playground equipment and surfacing - Part 7 Guidance on installation inspection maintenance and operation English version of DIN EN 1176-7 20.pdf

DIN EN 1176-5-2008 Playground equipment and surfacing - Part 5 Additional specific safety requirements and test methods for carousels English version of DIN EN .pdf

DIN EN 1159-1-2007 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 1 Determination of thermal expansion (includes Corrigendu.pdf

DIN EN 1093-4-2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4 Capture efficiency of an exhaust system - Tracer m.pdf

猜你喜欢

BS EN 2907-1996 Nuts bihexagonal self-locking in heat resisting steel FE-PA92HT (A286) silver plated - Classification 1 100 MPa (at ambient temperature) 650 C《镀银的FE-PA92HT(A286)耐热钢.pdf

BS EN 2908-1994 Nuts bihexagonal self-locking deep counterbored in heat resisting steel FE-PA92HT (A286) - Classification 1100 MPa (at ambient temperature) 650 C《FE-PA92HT(A286)耐热钢.pdf

BS EN 291-1992 Rubber seals - Static seals in domestic appliances for combustible gas up to 200 mbar - Specification for material《压力为200毫巴及其以下的家用可燃气体静态密封用橡胶密封件的材料规范》.pdf

BS EN 2912-1996 Washers flat large diameter in aluminium alloy anodized or chromated《经阳极化或铬酸钝化处理的铝合金大直径扁平垫圈》.pdf

BS EN 2913-2000 Washers flat large diameter in steel cadmium plated《钢制镀镉大直径扁平垫圈》.pdf

BS EN 2914-1996 Washers flat large diameter in heat resisting steel passivated《钝化耐高温钢的大直径扁平垫圈》.pdf

BS EN 2925-1994 Bolts double hexagon head relieved shank long thread in heat resisting steel FE-PA92HT (A 286) Classification 900 MPa (at ambient temperature) 650C《FE-PA92HT(A286)耐.pdf

BS EN 2926-1996 Bolts double hexagon head relieved shank long thread in heat resisting steel FE-PA92HT (A286) silver plated - Classification 900 MPa (at ambient temperature) 650 C《.pdf

BS EN 2927-1996 Bolts double hexagon head relieved shank long thread in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification 1275 MPa (at ambient temperature) .pdf