1、October 2015Translation by DIN-Sprachendienst.English price group 20No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS
2、 91.140.30!%FG(“2353605www.din.deDDIN EN ISO 10121-1Test method for assessing the performance of gas-phase air cleaningmedia and devices for general ventilation Part 1: Gas-phase air cleaning media (ISO 10121-1:2014);English version EN ISO 10121-1:2014,English translation of DIN EN ISO 10121-1:2015-
3、10Methode zur Leistungsermittlung von Medien und Vorrichtungen zur Reinigung derGasphase fr die allgemeine Lftung Teil 1: Medien zur Reinigung der Gasphase (ISO 10121-1:2014);Englische Fassung EN ISO 10121-1:2014,Englische bersetzung von DIN EN ISO 10121-1:2015-10Mthodes dessai pour lvaluation de la
4、 performance des medias et des dispositifs defiltration molculaire pour la ventilation gnrale Partie 1: Mdias de filtration molculaire (GPACM) (ISO 10121-1:2014);Version anglaise EN ISO 10121-1:2014,Traduction anglaise de DIN EN ISO 10121-1:2015-10SupersedesDIN EN ISO 10121-1:2014-10www.beuth.deIn c
5、ase of doubt, the German-language original shall be considered authoritative.Document comprises 48 pages09.15 DIN EN ISO 10121-1:2015-10 2 A comma is used as the decimal marker. National foreword This standard includes safety requirements. This document (EN ISO 10121-1:2014) has been prepared by Tec
6、hnical Committee ISO/TC 142 “Cleaning equipment for air and other gases” in collaboration with Technical Committee CEN/TC 195 “Air filters for general air cleaning”. The responsible German body involved in its preparation was the DIN-Normenausschuss Maschinenbau (DIN Standards Committee Mechanical E
7、ngineering), Working Committee NA 060-09-21 AA Luftfilter of Section Allgemeine Lufttechnik. Representatives of manufacturers and users of air filters, and of research and testing institutes contributed to this standard. This standard contains specifications meeting the essential requirements set ou
8、t in Annex I of the “Machinery Directive”, Directive 2006/42/EC, and which apply to machines that are either first placed on the market or commissioned within the EEA. This standard serves to facilitate proof of compliance with the essential requirements of that directive. The International Standard
9、s referred to in this document and taken over as European Standards have been published as the corresponding DIN EN ISO Standards with the same number. Where the International Standards and publications referred to are not also DIN ISO Standards with the same number, there are no national standards
10、available. In addition to the legal units of measurement, this standard also uses the unit “ft” (“feet”). It should be noted that the Gesetz ber Einheiten im Messwesen (German Law on units in metrology) prohibits the use of this unit for official and commercial purposes in Germany. The indication of
11、 this unit solely serves to facilitate the communication with those countries where this unit is used (import-export business). Conversion Non-SI unit SI unit Conversion ft m 1 ft = 0,304 8 m Amendments This standard differs from DIN EN ISO 10121-1:2014-10 as follows: a) 5.3, Table 1: The text “give
12、n in Annex D for 5.4 or user selected in 5.5” refers to air flow rate, face velocity and residence time. Thus, the line “residence time” has been connected accordingly. In the last line of the penultimate column (empty cell) “n.a.” has been added. b) 7.2.2: After the first sentence, the formula in t
13、he second indent has been corrected to read “tDC(tEND tVC).” DIN EN ISO 10121-1:2015-10 3 c) Table A.3: (German version only) In the 2nd column, 7th line, “Monitor CU, CD, TU, TD, RHU, RHD, P and Q, every 5 data points (jeweils bei fnf Datenpunkten), recorded for empty test stand” has been corrected
14、 to read “Monitor CU, CD, TU, TD, RHU, RHD, P and Q, every min during 5 data points recorded for empty test stand”. Previous editions DIN EN ISO 10121-1: 2014-10 DIN EN ISO 10121-1:2015-10 4 This page is intentionally blank EN ISO 10121-1 April 2014 ICS 91.140.30 English Version Test method for asse
15、ssing the performance of gas-phase air cleaning media and devices for general ventilation - Part 1: Gas-phase air cleaning media (ISO 10121-1:2014)Mthodes dessai pour lvaluation de la performance des mdias et des dispositifs de filtration molculaire pour la ventilation gnrale - Partie 1: Mdias de fi
16、ltration molculaire (GPACM) (ISO 10121-1:2014) Methode zur Leistungsermittlung von Medien und Vorrichtungen zur Reinigung der Gasphase fr die allgemeine Lftung - Teil 1: Medien zur Reinigung der Gasphase (ISO 10121-1:2014) This European Standard was approved by CEN on 6 March 2014. CEN members are b
17、ound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the
18、 CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centr
19、e has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania
20、, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN
21、 national Members. Ref. No. EN ISO 10121-1:2014 EEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGContents Page Foreword . 3 Introduction . 4 1 Scope . 5 2 Normative references. 5 3 Terms and definitions
22、5 4 Symbols and abbreviated terms . 10 4.1 Symbols 10 4.2 Abbreviated terms 12 5 Testing of different GPACM configurations . 12 5.1 General 12 5.2 Test setup and normative GPACM sample holder 13 5.3 Raw data, sampling accuracy and normative generation parameters . 15 5.4 Test parameters for the stan
23、dardized benchmark test 15 5.5 Test parameters selected between user and supplier 17 6 Test sequence . 18 6.1 General 18 6.2 Conditioning and pressure drop determination . 18 6.3 Capacity determination . 19 6.4 Retentivity determination 22 7 Validation of test setup 23 7.1 General 23 7.2 Determinati
24、on of rise time and decay time 23 8 Evaluation and report 25 8.1 Test report introduction . 25 8.2 Test report example . 25 9 Safety features 29 Annex A (normative) Test equipment requirements, equipment validation and routine operation 30 Annex B (informative) Challenge gases, generation sources an
25、d analysis techniques 33 Annex C (informative) Design of a media test stand 39 Annex D (normative) Normative sampling procedures and test parameters for different GPACM 40 Bibliography 44 2DIN EN ISO 10121-1:2015-10 EN ISO 10121-1:2014 (E) Foreword This document (EN ISO 10121-1:2014) has been prepar
26、ed by Technical Committee ISO/TC 142 “Cleaning equipment for air and other gases” in collaboration with Technical Committee CEN/TC 195 “Air filters for general air cleaning” the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by pu
27、blication of an identical text or by endorsement, at the latest by October 2014, and conflicting national standards shall be withdrawn at the latest by October 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENEL
28、EC shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republi
29、c, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorse
30、ment notice The text of ISO 10121-1:2014 has been approved by CEN as EN ISO 10121-1:2014 without any modification. 3DIN EN ISO 10121-1:2015-10EN ISO 10121-1:2014 (E)IntroductionThere is an increasing use and need for gas-phase filtration in general filtration applications. This demand can be expecte
31、d to increase rapidly due to the increasing pollution problems in the world together with an increasing awareness that solutions to the problems are available in the form of filtration devices or phrased more technically: gas-phase air cleaning devices (GPACD). The performance of devices using adsor
32、ption for gas removal relies to a large extent on the performance of a solid gas-phase air cleaning media (GPACM) incorporated in the device. Still applications, device performance and media performance are often poorly understood by the user and supplier of such media and devices. Media tests may a
33、lso be adequate to offer data for real applications if actual low concentrations (weeks) can be used in the test, provided that the geometrical configuration, packing density and flow conditions of the small-scale test specimen are equal to those used in the real applications. Such tests are however
34、 not included in the scope of this part of ISO 10121. This part of ISO 10121 attempts to increase understanding and communication by supplying a more standardized interface between media suppliers, device suppliers and end users. At present, standards exist for general ventilation in Japan1by JIS, A
35、utomotive filters by ISO, in-duct sorptive media gas-phase air-cleaning devices by ASHRAE2and for adsorptive media by ASHRAE3and ASTM.5No international standard for general filtration exists today.This part of ISO 10121 provides methods, test equipment, data interpretation and reporting for three di
36、fferent types of gas-phase air cleaning media (GPACM) intended for use in gas-phase air cleaning devices (GPACD) for general ventilation applications.In addition information is given in a number of annexes: Annex A describes the normative validation procedure in detail in a tabulated form. Annex B g
37、ives a list of possible test gases, generation sources and suggests proper analysis equipment for common test gases Annex C describes the design of the test stand except the normative sample holder. Annex D describes the normative test setup and normative section of the test stand for the three diff
38、erent media configurations.A general introduction to molecular filtration and molecular filtration testing can be found in the scientific literature.The ISO 10121 series aims to provide laboratory test methods for media and devices which are used for removal of gas-phase contaminants from air in gen
39、eral ventilation. It consists of two parts: ISO 10121-1 covers three different media configurations and is targeted towards giving a standardized interface between media suppliers and producers of air cleaning devices. It may also be used between media suppliers and end customers with regards to loo
40、se fill media properties. ISO 10121-2 aims to give a standardized interface between suppliers of air cleaning devices and end customers seeking the best performing and most economical way to employ gas-phase filtration.4DIN EN ISO 10121-1:2015-10 EN ISO 10121-1:2014 (E) 1 ScopeThis part of ISO 10121
41、 aims to provide an objective laboratory test method, a suggested apparatus, normative test sections and normative tests for evaluation of three different solid gas-phase air cleaning media (GPACM) or GPACM configurations for use in gas-phase air cleaning devices intended for general filtration appl
42、ications. This part of ISO 10121 is specifically intended for challenge testing and not for general material evaluation or pore system characterization. The three different types of GPACM identified in this part of ISO 10121 are GPACM-LF (particles of different shape and size intended for e.g. Loose
43、 Fill applications), GPACM-FL (FLat sheet fabric intended for e.g. flat one layer, pleated or bag type devices) and GPACM-TS (three dimensional structures that are many times thicker than flat sheet and e.g. used as finished elements in a device). The tests are conducted in an air stream and the GPA
44、CM configurations are challenged with test gases under steady-state conditions. Since elevated gas challenge concentrations (relative to general ventilation applications) are used, test data should be used to compare GPACM within the same configuration and not for the purpose of predicting performan
45、ce in a real situation. It is also not implied that different GPACM configurations can be directly compared. The primary intention is to be able to compare like GPACM configurations to like, not between GPACM configurations. Testing of complete devices is described in ISO 10121-2.To ensure objectivi
46、ty for test equipment suppliers, no specific design of the test apparatus is defined: an example is illustrated in Annex C (informative). Instead normative demands for media sample holder design, apparatus properties and validation tests are specified.2 Normative referencesThe following documents, i
47、n whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 10121-2, Test methods for asse
48、ssing the performance of gas-phase air cleaning media and devices for general ventilation Part 2: Gas-phase air cleaning devices (GPACD)ISO 29464, Cleaning equipment for air and other gases TerminologyASTM D2854, Standard Test Method for Apparent Density of Activated Carbon3 Terms and definitionsFor the purposes of this document, the terms and definitions given in ISO 29464 and the following apply.3.1absorptiontransport and dissolution of a sorbate into an absorbent5DIN EN ISO 10121-1:2015-10EN ISO
