1、June 2012 Translation by DIN-Sprachendienst.English price group 16No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 2
2、5.140.10!$|“1899197www.din.deDDIN EN ISO 11148-5Hand-held non-electric power tools Safety requirements Part 5: Rotary percussive drills (ISO 11148-5:2011)English translation of DIN EN ISO 11148-5:2012-06Handgehaltene nicht elektrisch betriebene Maschinen Sicherheitsanforderungen Teil 5: Schlagbohrma
3、schinen (ISO 11148-5:2011)Englische bersetzung von DIN EN ISO 11148-5:2012-06Machines portatives moteur non lectrique Exigences de scurit Partie 5: Perceuses percussion rotatives (ISO 11148-5:2011)Traduction anglaise de DIN EN ISO 11148-5:2012-06SupersedesDIN EN 792-5:2009-12www.beuth.deDocument com
4、prises pagesIn case of doubt, the German-language original shall be considered authoritative.3306.12 DIN EN ISO 11148-5:2012-06 2 A comma is used as the decimal marker. National foreword This standard includes safety requirements. This standard has been prepared by Technical Committee ISO/TC 118 “Co
5、mpressors and pneumatic tools, machines and equipment” in collaboration with Technical Committee CEN/TC 255 “Hand-held, non-electric power tools Safety” (Secretariat: SIS, Sweden). The responsible German body involved in its preparation was the Normenausschuss Maschinenbau (Mechanical Engineering St
6、andards Committee), Working Committee NA 060-08-13 AA Druckluftwerkzeuge und -maschinen of Section Kompressoren und Vakuumtechnik. Representatives of manufacturers and users of rotary percussive drills, and of the employers liability insurance associations contributed to this standard. This standard
7、 contains specifications meeting the essential requirements set out in Annex I of the “Machinery Directive”, Directive 2006/42/EC, and which apply to hand-held non-electric power tools that are either first placed on the market or commissioned within the EEA. This standard serves to facilitate proof
8、 of compliance with the essential requirements of the directive. Once this standard is cited in the Official Journal of the European Union, it is deemed a “harmonized” standard and thus, a manufacturer applying this standard may assume compliance with the requirements of the Machinery Directive (“pr
9、esumption of conformity”). For the International Standards referred to in this document there are no national standards available unless they have been published as DIN EN, DIN EN ISO or DIN ISO standards with the same number. Amendments This standard differs from DIN EN 792-5:2009-12 as follows: a)
10、 the text of ISO 11148-5 has been adopted in its entirety; b) technical requirements of ANSI B.186.1 and references to EN ISO 12100 have been incorporated; c) vibration total values and noise-emission values and their uncertainties are to be declared; d) technical requirements have been brought in l
11、ine with EN 60745 (IEC 60745); e) user instructions are to include further and more detailed safety instructions. Previous editions DIN EN 792-5: 2001-02, 2009-12 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 11148-5 December 2011 ICS 25.140.10 Supersedes EN 792-5:2000+A1:2008English Vers
12、ion Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills (ISO 11148-5:2011) Machines portatives moteur non lectrique - Exigences de scurit - Partie 5: Perceuses percussion rotatives (ISO 11148-5:2011) Handgehaltene nicht elektrisch betriebene Maschinen - Sicher
13、heitsanforderungen - Teil 5: Schlagbohrmaschinen (ISO 11148-5:2011) This European Standard was approved by CEN on 12 November 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national stan
14、dard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in a
15、ny other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Rep
16、ublic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN D
17、E NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 11148-5:2011: EContents Page Foreword 3Annex ZA (informative) Relationship
18、 between this European Standard and the Essential Requirements of EU Directive 2006/42/EC .29Introduction . 4 1 Scope 5 2 Normative references 5 3 Terms and definitions . 3.1 General terms and definitions 6 3.2 Terms and definitions related to rotary percussive power tools . 8 4 Safety requirements
19、and/or protective measures 8 4.1 General . 8 4.2 Mechanical safety 8 4.3 Thermal safety . 9 4.4 Noise reduction .9 4.5 Vibration . 10 4.6 Materials and substances processed, used or exhausted 10 4.7 Ergonomics 11 4.8 Controls 11 5 Verification . 12 5.1 General conditions for tests . 12 5.2 Noise . 1
20、2 5.3 Vibration . 12 5.4 Unintentional start . 12 5.5 Power tool construction . 13 5.6 Structure of verification 13 6 Information for use 13 6.1 Marking, signs and written warnings 13 6.2 Instruction handbook 14 6.3 Operating instructions 19 6.4 Data . 20 6.5 Maintenance instructions .21 Annex A (in
21、formative) List of significant hazards . 22 Annex B (informative) Examples of rotary percussive drills covered by this part of ISO 11148 23 Annex C (normative) Symbols for labels and signs 24 Annex D (normative) Additional safety requirements related to internal combustion engine power tools 25 Bibl
22、iography 30 EN ISO 11148-5:2011 (E) DIN EN ISO 11148-5:2012-06 26Foreword This document (EN ISO 11148-5:2011) has been prepared by Technical Committee ISO/TC 118 “Compressors and pneumatic tools, machines and equipment“ in collaboration with Technical Committee CEN/TC 255 “Hand-held, non-electric po
23、wer tools - Safety” the secretariat of which is held by SIS. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2012, and conflicting national standards shall be withdrawn at the latest by June
24、2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 792-5:2000+A1:2008. This document has been prepared
25、under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive. For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document. According to the CEN/CENELEC Internal Regula
26、tions, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malt
27、a, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 11148-5:2011 has been approved by CEN as a EN ISO 11148-5:2011 without any modification. EN ISO 11148-5:2011 (E) DIN EN ISO 11148-5:2012-06 3 I
28、ntroduction This document is a type-C standard as stated in ISO 12100. The machinery concerned and the extent to which hazards, hazardous situations and events are covered are defined in the Scope of this part of ISO 11148. When requirements of this type-C standard are different from those which are
29、 stated in type-A or -B standards, the requirements of this type-C standard take precedence over the requirements of other standards, for machines that have been designed and built according to the requirements of this type-C standard. ISO 11148 consists of a number of independent parts for individu
30、al types of hand-held non-electric power tools. Certain parts of ISO 11148 cover hand-held non-electric power tools driven by internal combustion engines powered by gaseous or liquid fuel. In these parts, the safety aspects relating to internal combustion engines are found in a normative annex. The
31、parts are type-C standards and refer to pertinent standards of type A and B where such standards are applicable. EN ISO 11148-5:2011 (E) DIN EN ISO 11148-5:2012-06 4IMPORTANT The colours represented in the electronic file of this document can be neither viewed on screen nor printed as true represent
32、ations. For the purposes of colour matching, see ISO 3864-4, which provides colorimetric and photometric properties together with, as a guideline, references from colour order systems. 1 Scope This part of ISO 11148 specifies safety requirements for hand-held non-electric power tools (hereinafter “r
33、otary percussive drills”) intended for making holes in hard materials, such as rock and concrete. The rotary percussive drills can be powered by compressed air, hydraulic fluid or internal combustion engines (ICEs) and are intended to be used by one operator and supported by the operators hand or ha
34、nds, with or without a suspension, e.g. a balancer. This part of ISO 11148 is applicable to: plug hole drills; rock drills; rotary hammers. NOTE 1 For examples of rotary percussive drills, see Annex B. This part of ISO 11148 is not applicable to special requirements and modifications of rotary percu
35、ssive drills for the purpose of mounting them in a fixture. This part of ISO 11148 deals with all significant hazards, hazardous situations or hazardous events relevant to rotary percussive drills when they are used as intended and under conditions of misuse which are reasonably foreseeable by the m
36、anufacturer, with the exception of the use of rotary percussive drills in potentially explosive atmospheres. NOTE 2 EN 13463-1 gives requirements for non-electrical equipment for potentially explosive atmospheres. 2 Normative references The following referenced documents are indispensable for the ap
37、plication of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 3857-3, Compressors, pneumatic tools and machines Vocabulary Part 3: Pneumatic tools and machines ISO 5391,
38、Pneumatic tools and machines Vocabulary EN ISO 11148-5:2011 (E) DIN EN ISO 11148-5:2012-06 5 ISO 9158, Road vehicles Nozzles spouts for unleaded gasoline ISO 9159, Road vehicles Nozzles spouts for leaded gasoline and diesel fuel ISO 12100:2010, Safety of machinery General principles for design Risk
39、assessment and risk reduction ISO 13732-1, Ergonomics of the thermal environment Methods for the assessment of human responses to contact with surfaces Part 1: Hot surfaces ISO 13732-3, Ergonomics of the thermal environment Methods for the assessment of human responses to contact with surfaces Part
40、3: Cold surfaces ISO 15744, Hand-held non-electric power tools Noise measurement code Engineering method (grade 2) ISO 17066, Hydraulic tools Vocabulary ISO 28927-10, Hand-held portable power tools Test methods for evaluation of vibration emission Part 10: Percussive drills, hammers and breakers EN
41、12096, Mechanical vibration Declaration and verification of vibration emission values 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO 3857-3, ISO 5391, ISO 12100 and ISO 17066 (for hydraulic tools) and the following apply. 3.1 General terms and defin
42、itions 3.1.1 hand-held power tool machine operated by one or two hands and driven by rotary or linear motors powered by compressed air, hydraulic fluid, gaseous or liquid fuel, electricity or stored energy (e.g. by a spring) to do mechanical work and so designed that the motor and the mechanism form
43、 an assembly that can easily be brought to its place of operation NOTE Hand-held power tools driven by compressed air or gas are called pneumatic tools (or air tools). Hand-held power tools driven by hydraulic liquid are called hydraulic tools. 3.1.2 inserted tool tool inserted in the rotary percuss
44、ive tool to perform the intended work 3.1.3 service tool tool for performing maintenance or service on the rotary percussive tool 3.1.4 control device device to start and stop the rotary percussive tool or to change the direction of the rotation or to control the functional characteristics such as s
45、peed and power 3.1.5 start-and-stop device throttle manually operated control on the rotary percussive tool by which the energy supply to the motor can be turned on and off EN ISO 11148-5:2011 (E) DIN EN ISO 11148-5:2012-06 63.1.6 hold-to-run start-and-stop device constant-pressure throttle start-an
46、d-stop device which automatically returns to the OFF position when force on the start-and-stop device actuator is released 3.1.7 lock-on start-and-stop device constant pressure throttle with instant release lock hold-to-run start-and-stop device that can be locked in the ON position and which is des
47、igned so that it permits the rotary percussive tool to be turned off by a single motion of the same finger or fingers used to turn it on 3.1.8 lock-off start-and-stop device lock-off throttle start-and-stop device that automatically latches in the OFF position when the actuator is released and where
48、 two motions are required to energize the rotary percussive tool 3.1.9 positive on-off start-and-stop device positive on-off throttle start-and-stop device that remains in the ON position until it is manually changed 3.1.10 maximum operating pressure maximum pressure at which a rotary percussive tool may be operated 3.1.11 whip hose air
