1、November 2016 English price group 22No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 91.140.10; 91.140.30!%z“2588704
2、www.din.deDIN EN ISO 11855-4Building environment design Design, dimensioning, installation and control of embedded radiant heating and cooling systems Part 4: Dimensioning and calculation of the dynamic heating and cooling capacity of Thermo Active Building Systems (TABS) (ISO 118554:2012);English v
3、ersion EN ISO 118554:2015,English translation of DIN EN ISO 11855-4:2016-11Umweltgerechte Gebudeplanung Planung, Auslegung, Installation und Steuerung flchenintegrierter Strahlheizungs und khlsysteme Teil 4: Auslegung und Berechnung der dynamischen Wrme und Khlleistung fr thermoaktive Bauteilsysteme
4、 (TABS) (ISO 118554:2012);Englische Fassung EN ISO 118554:2015,Englische bersetzung von DIN EN ISO 11855-4:2016-11Conception de lenvironnement des btiments Conception, construction et fonctionnement des systmes de chauffage et de refroidissement par rayonnement Partie 4: Dimensionnement et calculs r
5、elatifs au chauffage adiabatique et la puissance frigorifique pour systmes thermoactifs (TABS) (ISO 118554:2012);Version anglaise EN ISO 118554:2015,Traduction anglaise de DIN EN ISO 11855-4:2016-11SupersedesDIN EN ISO 118554:201511www.beuth.deDocument comprises 62 pagesDTranslation by DIN-Sprachend
6、ienst.In case of doubt, the German-language original shall be considered authoritative.11.16 DIN EN ISO 11855-4:2016-11 2 A comma is used as the decimal marker. National foreword The text of ISO 11855-4:2012 has been prepared by Technical Committee ISO/TC 205 “Building environment design” and has be
7、en taken over as EN ISO 11855-4:2015 by Technical Committee CEN/TC 228 “Heating systems and water based cooling systems in buildings” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was DIN-Normenausschuss Heiz- und Raumlufttechnik (DIN Standards Committee Heatin
8、g and Ventilation Technology), Working Committee NA 041-01-58 AA Heizungsanlagen und wassergefhrte Khlanlagen in Gebuden (SpA CEN/TC 228). The DIN Standard corresponding to the International Standard referred to in this document is as follows: ISO 11855-1 DIN EN ISO 11855-1 Amendments This standard
9、differs from DIN EN 15377-3:2007-12 as follows: a) Clause 4 “Relation to other EPBD standards” has been dropped; b) Clause 5 “Optimisation of systems for facilitating the use of renewable energy sources” has been dropped; c) definitions and comfort criteria are now dealt with in DIN EN ISO 11855-1;
10、d) the standard has been editorially revised. Compared with DIN EN ISO 11855-4:2015-11 the following corrections have been made to the German version to bring it into line with the English reference version: a) in Subclause 6.1, “Hp: T1= T2= T3” has been added; b) in Subclause 6.2, formula (1) has b
11、een corrected; c) in Subclause 6.3, last paragraph, the English equivalents for the terms used in the example in the figure on the right side have been dropped; d) in Subclause 6.4, 2ndparagraph, “n nMax” has been changed to “n nMax”; e) in Clause B.2, 4thparagraph, the sentence “Die thermischen Kno
12、ten mssen nach den folgenden Regeln nummeriert werden” has been corrected to read “Die thermischen Knoten sollten nach den folgenden Regeln nummeriert werden”; f) in Clause B.2, formula (B.3d), “C” has been deleted; g) in Clause B.3, the indices of HConvUpand HConvDownhave been corrected to read HCo
13、ndUpand HCondDown(see Table B.1 and explanation of the formula above Table B.1); h) in Clause B.3, 4thformula from the bottom, “AF” has been corrected to read “AW”. Previous editions DIN EN 15377-3: 2007-12 DIN EN ISO 11855-4: 2015-11 DIN EN ISO 11855-4:2016-11 3 National Annex NA (informative) Bibl
14、iography DIN EN ISO 11855-1, Building environment design Design, dimensioning, installation and control of embedded radiant heating and cooling systems Part 1: Definition, symbols and comfort criteria DIN EN ISO 11855-4:2016-11 4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUR
15、OPISCHE NORM EN ISO 11855-4 August 2015 ICS 91.140.10; 91.140.30 Supersedes EN 15377-3:2007English Version Building environment design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 4: Dimensioning and calculation of the dynamic heating and co
16、oling capacity of Thermo Active Building Systems (TABS) (ISO 11855-4:2012) Conception de lenvironnement des btiments - Conception, construction et fonctionnement des systmes de chauffage et de refroidissement par rayonnement - Partie 4: Dimensionnement et calculs relatifs au chauffage adiabatique et
17、 la puissance frigorifique pour systmes thermoactifs (TABS) (ISO 11855-4:2012) Umweltgerechte Gebudeplanung - Planung, Auslegung, Installation und Steuerung flchenintegrierter Strahlheizungs- und -khlsysteme - Teil 4: Auslegung und Berechnung der dynamischen Wrme- und Khlleistung fr thermoaktive Bau
18、teilsysteme (TABS) (ISO 11855-4:2012) This European Standard was approved by CEN on 30 July 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to
19、-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translat
20、ion under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland,
21、Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION CO
22、MIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 11855-4:2015 EContents Page European foreword . 3
23、 Introduction . 5 1 Scope 6 2 Normative references 6 3 Terms and definitions . 6 4 Symbols and abbreviations 6 5 The concept of Thermally Active Surfaces (TAS) 11 6 Calculation methods . 16 6.1 General . 16 6.2 Rough sizing method 17 6.3 Simplified sizing by diagrams 18 6.4 Simplified model based on
24、 finite difference method (FDM) 24 6.4.1 Cooling system 25 6.4.2 Hydraulic circuit and slab . 25 6.4.3 Room . 27 6.4.4 Limits of the method . 29 6.5 Dynamic building simulation programs 30 7 Input for computer simulations of energy performance . 30 Annex A (informative) Simplified diagrams 31 Annex
25、B (normative) Calculation method 36 B.1. Pipe level 36 B.2. Thermal nodes composing the slab and room 36 B.3. Calculations for the generic h-th hour 40 B.4 Sizing of the system 46 Annex C (informative) Tutorial guide for assessing the model 47 Annex D (informative) Computer program . 49 Bibliography
26、 57 DIN EN ISO 11855-4:2016-11EN ISO 11855-4:2015(E)2Foreword . 4 European foreword The text of ISO 11855-4:2012 has been prepared by Technical Committee ISO/TC 205 “Building environment design” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 11855-4:201
27、5 by Technical Committee CEN/TC 228 “Heating systems and water based cooling systems in buildings” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February
28、 2016, and conflicting national standards shall be withdrawn at the latest by February 2016. This standard is applicable for design, construction and operation of radiant heating and cooling systems. The methods defined in part 2 are intended to determine the design heating or cooling capacity used
29、for the design and evaluation of the performance of the system. For identifying product characteristics by testing and proving the thermal output of heating and cooling surfaces embedded in floors, ceilings and walls the standard series EN 1264 can be used. Attention is drawn to the possibility that
30、 some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 15377-3:2007. According to the CEN-CENELEC Internal Regulations, the national standards organization
31、s of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
32、Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 11855-4:2012 has been approved by CEN as EN ISO 11855-4:2015 without any modification. DIN EN ISO 11855-4:2016-11EN ISO 11855-4:2015 (E) 3
33、 Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a
34、technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matter
35、s of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulat
36、ed to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible
37、 for identifying any or all such patent rights. ISO 11855-4 was prepared by Technical Committee ISO/TC 205, Building environment design. ISO 11855 consists of the following parts, under the general title Building environment design Design, dimensioning, installation and control of embedded radiant h
38、eating and cooling systems: Part 1: Definition, symbols, and comfort criteria Part 2: Determination of the design and heating and cooling capacity Part 3: Design and dimensioning Part 4: Dimensioning and calculation of the dynamic heating and cooling capacity of Thermo Active Building Systems (TABS)
39、 Part 5: Installation Part 6: Control Part 1 specifies the comfort criteria which should be considered in designing embedded radiant heating and cooling systems, since the main objective of the radiant heating and cooling system is to satisfy thermal comfort of the occupants. Part 2 provides steady-
40、state calculation methods for determination of the heating and cooling capacity. Part 3 specifies design and dimensioning methods of radiant heating and cooling systems to ensure the heating and cooling capacity. Part 4 provides a dimensioning and calculation method to design Thermo Active Building
41、Systems (TABS) for energy-saving purposes, since radiant heating and cooling systems can reduce energy consumption and heat source size by using renewable energy. Part 5 addresses the installation process for the system to operate as intended. Part 6 shows a proper control method of the radiant heat
42、ing and cooling systems to ensure the maximum performance which was intended in the design stage when the system is actually being operated in a building. DIN EN ISO 11855-4:2016-11EN ISO 11855-4:2015(E)4 Introduction The radiant heating and cooling system consists of heat emitting/absorbing, heat s
43、upply, distribution, and control systems. The ISO 11855 series deals with the embedded surface heating and cooling system that directly controls heat exchange within the space. It does not include the system equipment itself, such as heat source, distribution system and controller. The ISO 11855 ser
44、ies addresses an embedded system that is integrated with the building structure. Therefore, the panel system with open air gap, which is not integrated with the building structure, is not covered by this series. The ISO 11855 series shall be applied to systems using not only water but also other flu
45、ids or electricity as a heating or cooling medium. The object of the ISO 11855 series is to provide criteria to effectively design embedded systems. To do this, it presents comfort criteria for the space served by embedded systems, heat output calculation, dimensioning, dynamic analysis, installatio
46、n, operation, and control method of embedded systems. DIN EN ISO 11855-4:2016-11EN ISO 11855-4:2015 (E) 5 1 Scope This part of ISO 11855 allows the calculation of peak cooling capacity of Thermo Active Building Systems (TABS), based on heat gains, such as solar gains, internal heat gains, and ventil
47、ation, and the calculation of the cooling power demand on the water side, to be used to size the cooling system, as regards the chiller size, fluid flow rate, etc. This part of ISO 11855 defines a detailed method aimed at the calculation of heating and cooling capacity in non-steady state conditions
48、. The ISO 11855 series is applicable to water based embedded surface heating and cooling systems in residential, commercial and industrial buildings. The methods apply to systems integrated into the wall, floor or ceiling construction without any open air gaps. It does not apply to panel systems with open air gaps which are not integrated into the building structure. The ISO 11855 series also applies, as appropriate, to the use of fluids other than water as a heating or cooling medium. The ISO
