1、European Standard EN ISO 12215-3 : 2002 has the status of a DIN Standard.A comma is used as the decimal marker.National forewordThis standard has been published in accordance with a decision taken by CEN/BT/WG 69 Small Craft(Secretariat: Sweden) to adopt, without alteration, International Standard I
2、SO 12215-3 as a EuropeanStandard.The responsible German body involved in its preparation was the Normenstelle Schiffs- und Meerestechnik(Shipbuilding and Marine Technology Standards Committee).DIN EN ISO 12215-4 is the standard corresponding to International Standard ISO 12215-4 referred to inclause
3、 2 of the EN.National Annex NAStandard referred to(and not included in Normative references and Bibliography)DIN EN ISO 12215-4 Small craft Hull construction and scantlings Part 4: Workshop and manufacturing(ISO 12215-4 : 2002)ICS 47.080Kleine Wasserfahrzeuge Rumpfbauweise und Dimensionierung Teil 3
4、 Werkstoffe: Stahl, Aluminium-legierungen, Holz, andere Werkstoffe (ISO 12215-3 : 2002)Ref. No. DIN EN ISO 12215-3 : 2002-09English price group 09 Sales No. 110901.03DEUTSCHE NORM September 2002EN ISO 12215-3EN comprises 12 pages. No part of this standard may be reproduced without the prior permiss
5、ion ofDIN Deutsches Institut fr Normung e.V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).Small craft Hull construction and scantlingsPart 3: Materials: Steel, aluminium alloys, wood, other materials(ISO 12215-3 : 2002)English ve
6、rsion of DIN EN ISO 12215-3English versionICS 47.080Management Centre: rue de Stassart 36, B-1050 BrusselsEuropean Committee for StandardizationComit Europen de NormalisationEuropisches Komitee fr NormungSmall craft Hull construction and scantlingsPart 3: Materials: Steel, aluminium alloys, wood, ot
7、her materials(ISO 12215-3 : 2002) 2002. CEN All rights of exploitation in any form and by any meansreserved worldwide for CEN national members.Ref. No. EN ISO 12215-3 : 2002 EPetits navires Construction decoques et chantillons Partie 3:Matriaux: Acier, alliages dalumi-nium, bois, autres matriaux(ISO
8、 12215-3 : 2002)Kleine Wasserfahrzeuge Rumpf-bauweise und Dimensionierung Teil 3: Werkstoffe: Stahl,Aluminiumlegierungen, Holz, andereWerkstoffe (ISO 12215-3 : 2002)This European Standard was approved by CEN on 2002-05-01.CEN members are bound to comply with the CEN/CENELEC Internal Regulationswhich
9、 stipulate the conditions for giving this European Standard the status of anational standard without any alteration.Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to anyCEN member.The European Standards exi
10、st in three official versions (English, French, German).A version in any other language made by translation under the responsibility of aCEN member into its own language and notified to the Management Centre hasthe same status as the official versions.CEN members are the national standards bodies of
11、 Austria, Belgium, the CzechRepublic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, Malta, the Netherlands, Norway, Portugal, Spain, Sweden, Switzer-land, and the United Kingdom.May 2002EN ISO 12215-3Page 2EN ISO 12215-3 : 2002ForewordInternational StandardISO 12215-
12、3 : 2002 Small craft Hull construction and scantlings Part 3: Materials: Steel, aluminium alloys,wood, other materials,which was prepared by ISO/TC 188 Small craft of the International Organization for Standardization, has beenadopted by CEN/BT as a European Standard.This European Standard has been
13、prepared under a mandate given to CEN by the Commission of EuropeanCommunities and the European Free Trade Association and supports essential requirements of the relevant ECDirective.This European Standard shall be given the status of a national standard, either by publication of an identicaltext or
14、 by endorsement, and conflicting national standards withdrawn, by November 2002 at the latest.In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations of the follow-ing countries are bound to implement this European Standard:Austria, Belgium, the Czech Republic,
15、Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, Malta, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom.Endorsement noticeThe text of the International Standard ISO 12215-3 : 2002 was approved by CEN as a European Standardwithout an
16、y modification.2333468891011Page 3EN ISO 12215-3 : 2002Page 4EN ISO 12215-3 : 2002Page 5EN ISO 12215-3 : 2002Page 6EN ISO 12215-3 : 2002Page 7EN ISO 12215-3 : 2002Page 8EN ISO 12215-3 : 2002Page 9EN ISO 12215-3 : 2002Page 10EN ISO 12215-3 : 2002Page 11EN ISO 12215-3 : 2002Page 12EN ISO 12215-3 : 2002
