1、ICS 83.080.10Kunststoffe Ungesttigte Polyesterharze (UP-R) Teil 2: Herstellung von Probekrpern und Bestimmungvon Eigenschaften (ISO 3672-2 : 2000)European Standard EN ISO 3672-2 : 2001 has the status of a DIN Standard.A comma is used as the decimal marker.National forewordThis standard has been publ
2、ished in accordance with a decision taken by CEN/TC 249 to adopt, withoutalteration, International Standard ISO 3672-2 as a European Standard.The responsible German body involved in its preparation was the Normenausschuss Kunststoffe (PlasticsStandards Committee), Technical Committee Hrtbare Harze.T
3、he DIN Standards corresponding to the IEC Publications and International Standards referred to in clause2 of the EN are as follows:IEC Publication/ DIN StandardISO StandardIEC 60093 DIN IEC 60093IEC 60243-1 DIN EN 60243-1IEC 60695-11-10 DIN EN 60695-11-10IEC 60695-11-20 DIN EN 60695-11-20ISO 62 DIN
4、EN ISO 62ISO 75-2 DIN EN ISO 75-2ISO 178 DIN EN ISO 178ISO 179-1 DIN EN ISO 179-1ISO 291 DIN EN ISO 291ISO 527-1 DIN EN ISO 527-1ISO 527-2 DIN EN ISO 527-2ISO 604 DIN EN ISO 604ISO 1675 DIN EN ISO 1675ISO 2114 DIN EN ISO 2114ISO 2535 DIN EN ISO 2535ISO 2554 DIN EN ISO 2554ISO 2719 DIN EN 22719ISO 28
5、18 DIN EN ISO 2818ISO 3167 DIN EN ISO 3167ISO 3219 DIN EN ISO 3219ISO 3521 DIN EN ISO 3521ISO 3672-1 DIN EN ISO 3672-1ISO 4589-2 DIN EN ISO 4589-2ISO 4615 DIN EN ISO 4615ISO 4630 DIN ISO 4630ISO 6271 DIN ISO 6271ISO 6603-2 DIN EN ISO 6603-2ISO 8256 DIN EN ISO 8256ISO 10350-1 DIN EN ISO 10350-1Ref. N
6、o. DIN EN ISO 3672-2 : 2002-07English price group 11 Sales No. 111111.02DEUTSCHE NORM July 2002EN ISO 3672-2Continued overleaf.EN comprises 11 pages. No part of this standard may be reproduced without the prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Be
7、rlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).PlasticsUnsaturated-polyester resins (UP-R)Part 2: Preparation of test specimens and determination of properties(ISO 3672-2 : 2000)English version of DIN EN ISO 3672-2National Annex NAStandards referred to(and not includ
8、ed in Normative references)DIN EN 22719 Petroleum products and lubricants Determination of flash point by the Pensky-Mar-tens closed cup method (ISO 2719 : 1988)DIN EN 60243-1 Methods of test for electric strength of solid insulating materials Part 1: Tests at powerfrequencies (IEC 60243-1 : 1998)DI
9、N EN 60695-11-10 Fire hazard testing Part 11-10: Test flames 50 W horizontal and vertical flame testmethods (IEC 60695-11-10 : 1999)DIN EN 60695-11-20 Fire hazard testing Part 11-20: Test flames 500 W flame test methods(IEC 60695-11-20 : 1999)DIN EN ISO 62 Plastics Determination of water absorption
10、(ISO 62 : 1999)DIN EN ISO 75-2 Determination of temperature of deflection of plastics under load Part 2: Plastics andebonite (ISO 75-2 : 1993)DIN EN ISO 178 Determination of the flexural properties of plastics (ISO 178 : 1993)DIN EN ISO 179-1 Plastics Determination of Charpy impact properties Part 1
11、: Non-instrumented im-pact test (ISO 179-1 : 2000)DIN EN ISO 291 Plastics Standard atmospheres for conditioning and testing (ISO 291 : 1997)DIN EN ISO 527-1 Plastics Determination of tensile properties Part 1: General principles for the deter-mination of tensile properties (ISO 527-1 : 1993 + Corr 1
12、 : 1994)DIN EN ISO 527-2 Plastics Determination of tensile properties Part 2: Test conditions for moulding andextrusion plastics (ISO 527-2 : 1993 + Corr 1 : 1994)DIN EN ISO 604 Determination of the compressive properties of plastics (ISO 604 : 1993)DIN EN ISO 1675 Plastics Liquid resins Determinati
13、on of density by the pycnometer method(ISO 1675 : 1985)DIN EN ISO 2114 Plastics (polyester resins) and paints and varnishes (binders) Determination of partialacid value and total acid value (ISO 2114 : 2000)DIN EN ISO 2535 Unsaturated polyester resins Measurement of gel time at 25 C (ISO 2535 : 1997
14、)DIN EN ISO 2554 Unsaturated polyester resins Determination of hydroxyl value (ISO 2554 : 1997)DIN EN ISO 2818 Plastics Preparation of test specimens by machining (ISO 2818 : 1994)DIN EN ISO 3167 Plastics Multi-purpose test specimens (ISO 3167 : 1993)DIN EN ISO 3219 Polymers and resins in the liquid
15、 state or as emulsions or dispersions Determinationof viscosity using a rotational viscometer with defined shear rate (ISO 3219 : 1993)DIN EN ISO 3521 Unsaturated polyester and epoxy resins Determination of overall volume shrinkage(ISO 3521 : 1997)DIN EN ISO 3672-1 Plastics Unsaturated-polyester res
16、ins (UP-R) Part 1: Designation system(ISO 3672-1 : 2000)DIN EN ISO 4589-2 Plastics Determination of burning behaviour by oxygen index Part 2: Ambient-tem-perature test (ISO 4589-2 : 1996)DIN EN ISO 4615 Unsaturated polyesters and epoxide resins Determination of total chlorine content(ISO 4615 : 1979
17、)DIN EN ISO 6603-2 Plastics Determination of puncture impact behaviour of rigid plastics Part 2:Instrumented impact testing (ISO 6603-2 : 2000)DIN EN ISO 8256 Plastics Determination of the tensile-impact strength of plastics (ISO 8256 : 1990, in-cluding Technical Corrigendum 1 : 1991)DIN EN ISO 1035
18、0-1 Plastics Acquisition and presentation of comparable single-point data Part 1:Moulding materials (ISO 10350-1 : 1998)DIN IEC 60093 Methods of test for volume resistivity and surface resistivity of solid electrical insulatingmaterials (IEC 60093 : 1980)DIN ISO 4630 Binders for paints and varnishes
19、 Estimation of colour of clear liquids by the Gardnercolour scale (ISO 4630 : 1997)DIN ISO 6271 Clear liquids Estimation of colour by the platinum-cobalt scale (ISO 6271 : 1997)Page 2DIN EN ISO 3672-2 : 2002-07English versionICS 83.080.10PlasticsUnsaturated-polyester resins (UP-R)Part 2: Preparation
20、 of test specimens and determination of properties(ISO 3672-2 : 2000) 2001. CEN All rights of exploitation in any form and by any meansreserved worldwide for CEN national members.Ref. No. EN ISO 3672-2 : 2001 EKunststoffe Ungesttigte Polyester-harze (UP-R) Teil 2: Herstellung vonProbekrpern und Best
21、immung vonEigenschaften (ISO 3672-2 : 2000)This European Standard was approved by CEN on 2001-06-17.CEN members are bound to comply with the CEN/CENELEC Internal Regulationswhich stipulate the conditions for giving this European Standard the status of anational standard without any alteration.Up-to-
22、date lists and bibliographical references concerning such national stand-ards may be obtained on application to the Management Centre or to anyCEN member.The European Standards exist in three official versions (English, French, German).A version in any other language made by translation under the re
23、sponsibility of aCEN member into its own language and notified to the Management Centre hasthe same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, the CzechRepublic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, the
24、 Netherlands, Norway, Portugal, Spain, Sweden, Switzerland,and the United Kingdom.EN ISO 3672-2August 2001Management Centre: rue de Stassart 36, B-1050 BrusselsEuropean Committee for StandardizationComit Europen de NormalisationEuropisches Komitee fr NormungPlastiques Rsines de polyestersnon saturs
25、(UP-R) Partie 2: Prpara-tion des prouvettes et dterminationdes proprits (ISO 3672-2 : 2000)Page 2EN ISO 3672-2 : 2001ForewordInternational StandardISO 3672-2 : 2000 Plastics Unsaturated-polyester resins (UP-R) Part 2: Preparation of test specimens anddetermination of properties,which was prepared by
26、 ISO/TC 61 Plastics of the International Organization for Standardization, has beenadopted by Technical Committee CEN/TC 249 Plastics, the Secretariat of which is held by IBN, as a EuropeanStandard.This European Standard shall be given the status of a national standard, either by publication of an i
27、denticaltext or by endorsement, and conflicting national standards withdrawn, by February 2002 at the latest.In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations of the follow-ing countries are bound to implement this European Standard:Austria, Belgium, the C
28、zech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom.Endorsement noticeThe text of the International Standard ISO 3672-2 : 2000 was approved by CEN as a European Standard withoutany modification.22335556888Page 3EN ISO 3672-2 : 2001Page 4EN ISO 3672-2 : 2001Page 5EN ISO 3672-2 : 2001Page 6EN ISO 3672-2 : 2001Page 7EN ISO 3672-2 : 2001Page 8EN ISO 3672-2 : 2001Page 9EN ISO 3672-2 : 2001Page 10EN ISO 3672-2 : 2001Page 11EN ISO 3672-2 : 2001
