1、March 2017 English price group 11No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 91.040.10!%b.U“2631150www.din.deDI
2、N EN ISO 4043Simultaneous interpreting Mobile booths Requirements (ISO 4043:2016);English version EN ISO 4043:2016,English translation of DIN EN ISO 4043:2017-03Simultandolmetschen Mobile Kabinen Anforderungen (ISO 4043:2016);Englische Fassung EN ISO 4043:2016,Englische bersetzung von DIN EN ISO 404
3、3:2017-03Interprtation simultane Cabines transportables Exigences (ISO 4043:2016)Version anglaise EN ISO 4043:2016,Traduction anglaise de DIN EN ISO 4043:2017-03www.beuth.deDocument comprises 18 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considere
4、d authoritative.02.17 DIN EN ISO 4043:2017-03 2 A comma is used as the decimal marker. National foreword The responsible German body involved in its preparation was DIN-Normenausschuss Terminologie (DIN Standards Committee Terminology), Working Committee NA 105-00-03-02 AK Dolmetschdienstleistungen
5、und -technik. This document (ISO 4043) has been prepared by Technical Committee ISO/TC 37 “Terminology and other language and content resources”, Subcommittee SC 5, “Translation, interpreting and related technology”. In the parallel voting procedure under the Vienna Agreement, it has been adopted as
6、 EN ISO 4043. The DIN Standards corresponding to the International Standards referred to in this document are as follows: ISO 1182 DIN EN ISO 1182 ISO 2603 DIN EN ISO 2603 ISO 3382-1 DIN EN ISO 3382-1 ISO 3382-2 DIN EN ISO 3382-2 ISO 16283-1 DIN EN ISO 16283-1 ISO 20108 DIN EN ISO 20108 ISO 20109 DI
7、N EN ISO 20109 National Annex NA (informative) Bibliography DIN EN ISO 1182, Reaction to fire tests for products Non-combustibility test DIN EN ISO 2603, Simultaneous interpreting Permanent booths Requirements DIN EN ISO 3382-1, Acoustics Measurement of room acoustic parameters Part 1: Performance s
8、paces DIN EN ISO 3382-2, Acoustics Measurement of room acoustic parameters Part 2: Reverberation time in ordinary rooms DIN EN ISO 16283-1, Acoustics Measurement of sound insulation in buildings and of building elements Part 1: Airborne sound insulation DIN EN ISO 20108*), Simultaneous interpreting
9、Quality and transmission of sound and image input Requirements DIN EN ISO 20109, Simultaneous interpreting Equipment Requirements *)Currently at a draft stage. EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 4043 December 2016 ICS 91.040.10 English Version Simultaneous interpreting - Mobile
10、 booths - Requirements (ISO 4043:2016) Interprtation simultane - Cabines transportables - Exigences (ISO 4043:2016) Simultandolmetschen - Mobile Kabinen - Anforderungen (ISO 4043:2016) This European Standard was approved by CEN on 12 November 2016. CEN members are bound to comply with the CEN/CENELE
11、C Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or
12、to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the offic
13、ial versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,
14、Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of e
15、xploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 4043:2016 EEuropean foreword .3Introduction 51 Scope . 62 Normative references 63 Terms and definitions . 64 General requirements . 75 Size, weight and handling 75.1 Size of booths . 75.2 Weight of
16、each component . 95.3 Transport and storage 96 Doors . 97 Cable passages .108 Windows .109 Acoustics 109.1 Sound insulation . 109.2 Sound absorption. 1110 Ventilation 1111 Working surface . 1112 Lighting 1213 Electricity supply. 1214 Language panels. 12Annex A (normative) Requirements for the use an
17、d siting of mobile booths 13Bibliography .16Contents PageDIN EN ISO 4043:2017-03 EN ISO 4043:2016 (E) 2Foreword .4European foreword This document (EN ISO 4043:2016) has been prepared by Technical Committee ISO/TC 37 “Terminology and other language and content resources“. This European Standard shall
18、 be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2017, and conflicting national standards shall be withdrawn at the latest by June 2017. Attention is drawn to the possibility that some of the elements of this document ma
19、y be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria
20、, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden,
21、Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 4043:2016 has been approved by CEN as EN ISO 4043:2016 without any modification. DIN EN ISO 4043:2017-03 EN ISO 4043:2016 (E)3 ForewordISO (the International Organization for Standardization) is a worldwide federation of
22、national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. Inte
23、rnational organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those int
24、ended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see ww
25、w.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document
26、will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expre
27、ssions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html.The committee responsible for this document is ISO/TC 37, Terminology an
28、d other language and content resources, Subcommittee SC 5, Translation, interpreting and related technology.This third edition cancels and replaces the second edition (ISO 4043:1998), which has been technically revised.DIN EN ISO 4043:2017-03 EN ISO 4043:2016 (E) 4 IntroductionA number of basic aspe
29、cts are to be considered when designing and/or using mobile booths. As interpreting is an activity that requires high concentration, stress factors have to be avoided and the working environment accordingly has to meet the highest ergonomic standards and provide an environment that enables interpret
30、ers to carry out their work properly.The design of a mobile booth is governed by four overall principles:a) sound insulation, both from the noise transmitted from the booths environment to a booth and vice versa, and from noise passing from one booth to another;b) good visual communication between t
31、he interpreters and the participants in the event;c) adequate working conditions for the interpreters, whose booths are their workplace, such as to enable them to sustain the intense effort of concentration required throughout the days work;d) the booth must be lightweight yet sturdy, easy to handle
32、 and assemble, and designed in such a way that it can also be easily dismantled and maintained.DIN EN ISO 4043:2017-03 EN ISO 4043:2016 (E)5 1 ScopeThis document provides requirements and recommendations for the manufacturing of mobile simultaneous interpreting booths. The main features of mobile bo
33、oths that distinguish them from permanent simultaneous interpreting booths are that they can be dismantled, moved and set up in a conference room not equipped with permanent booths. This document also ensures the usability and accessibility of booths for all interpreters, including those with specia
34、l needs.Requirements for the use and siting of mobile booths are described in Annex A.In conjunction with either ISO 2603 or this document, ISO 20108 and ISO 20109 provide the relevant requirements both for the quality and transmission of sound and image provided to interpreters and for the equipmen
35、t needed in the booths.2 Normative referencesThe following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenc
36、ed document (including any amendments) applies.ISO 1182, Reaction to fire tests for products Non-combustibility testISO 3382-1, Acoustics Measurement of room acoustic parameters Part 1: Performance spacesISO 3382-2, Acoustics Measurement of room acoustic parameters Part 2: Reverberation time in ordi
37、nary roomsISO 8995-1, Lighting of work places Part 1: IndoorISO 11228-1, Ergonomics Manual handling Part 1: Lifting and carryingISO 11925-3, Reaction to fire tests Ignitability of building products subjected to direct impingement of flame Part 3: Multi-source testISO 16283-1, Acoustics Field measure
38、ment of sound insulation in buildings and of building elements Part 1: Airborne sound insulationISO 20108 , Simultaneous interpreting Quality and transmission of sound and image input RequirementsISO 20109:2016, Simultaneous interpreting Equipment RequirementsISO 21542, Building construction Accessi
39、bility and usability of the built environment3 Terms and definitionsFor the purposes of this document, the following terms and definitions apply.ISO and IEC maintain terminological databases for use in standardization at the following addresses: IEC Electropedia: available at http:/www.electropedia.
40、org/ ISO Online browsing platform: available at http:/www.iso.org/obpN1)National footnote: Currently at a draft stage. N1)DIN EN ISO 4043:2017-03 EN ISO 4043:2016 (E) 6 3.1simultaneous interpretingmode of interpreting performed while a speaker is still speaking or signingNote 1 to entry: The activit
41、y requires specialized equipment.3.2boothbooth for simultaneous interpretingself-contained unit enclosing the interpreters work spaceNote 1 to entry: One of the purposes of simultaneous interpreting booths is to provide sound insulation, both from the noise transmitted from the booths external envir
42、onment to the booth itself and vice versa, and from noise passing from one booth to another.3.2.1permanent boothpermanent simultaneous interpreting boothbooth (3.2) structurally integrated into a facilityNote 1 to entry: ISO 2603 applies to permanent booths.3.2.2mobile boothmobile simultaneous inter
43、preting boothfree-standing booth (3.2) assembled from modular components, which can be transported and set up at a variety of facilities3.3video displayelectronic device that represents information in a visual form4 General requirementsMobile booths are designed for temporary use in a variety of loc
44、ations. They shall provide at least the required sound insulation and sound absorption (see Clause 9). Booths shall be designed in such a way that they can be dismantled, maintained and re-used. Furthermore, the initial performance of the sound insulation shall be guaranteed for use at least 100 tim
45、es, and handling, assembling and dismantling shall not incur additional replacement costs.Materials used shall be easy to maintain, non-toxic, odourless, anti-static, fire-retardant or non-flammable according to ISO 1182 and ISO 11925-3, and cause no irritation to eyes, skin or respiratory tract. Th
46、ey shall neither attract nor collect dust.The colour scheme in the booth shall be appropriate for the restricted working space (soft, light colours, subtle pastel shades). Matte finishes shall be used for all surfaces in the booth in order to avoid reflections.5 Size, weight and handling5.1 Size of
47、boothsSee Figure 1 and Figure 2.Each booth shall accommodate the required number of interpreters comfortably seated side by side, while at the same time allowing them to enter and leave the booth without disturbing one another. Enough space shall be provided to ensure adequate ventilation and temper
48、ature control.DIN EN ISO 4043:2017-03 EN ISO 4043:2016 (E)7 The following minimum internal dimensions shall apply:a) width: for no more than two interpreters 1,60 m; for no more than three interpreters 2,40 m; for no more than four interpreters 3,20 m;b) depth: 1,60 m;c) height: 2,00 m.The booths shall be modular and allow for
