1、ICS 01.100.20Technische Zeichnungen Allgemeine Grundlagen der Darstellung Teil 44: Schnitte in Zeichnungen der mechanischen Technik(ISO 128-44 : 2001)This standard incorporates International StandardISO 128-44 Technical drawings General principles of presentation Part 44: Sections on mechanicalengin
2、eering drawings.National forewordThis standard has been prepared by ISO/TC 10 Technical product documentation, SC 1 Basic conven-tions.The responsible German body involved in its preparation was the Normenausschuss Technische Grundlagen(Fundamentals in Technology Standards Committee), Technical Comm
3、ittee Technisches Zeichnen.The DIN Standards corresponding to the International Standards referred to in clause 2 of the ISO Standardare as follows:ISO Standard DIN StandardISO 128-20 DIN ISO 128-20ISO 128-24 DIN ISO 128-24ISO 128-40 DIN ISO 128-40ISO 5456-2 DIN ISO 5456-2ISO 6428 DIN ISO 6428ISO 10
4、209-1 DIN 199-1ISO 10209-2 DIN ISO 10209-2AmendmentsDIN 6-2, December 1986 edition, has been superseded by the specifications of DIN ISO 128-40,DIN ISO 128-44, and DIN ISO 128-50.Previous editionsDIN 36: 1922-10; DIN 6: 1922x-11, 1956-10, 1968-03; DIN 6-2: 1986-12.Ref. No. DIN ISO 128-44 : 2002-05En
5、glish price group 09 Sales No. 040911.02DEUTSCHE NORM May 2002ISO 128-44Continued overleaf.ISO Standard comprises 8 pages. No part of this standard may be reproduced without the prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclu
6、sive right of sale for German Standards (DIN-Normen).Technical drawings General principlesof presentationPart 44: Sections on mechanical engineering drawings(ISO 128-44 : 2001)This standard, together withDIN ISO 128-40 andDIN ISO 128-50, May 2002editions, supersedes DIN 6-2,December 1986 edition.Nat
7、ional Annex NAStandards referred to(and not included in Normative references and Bibliography)DIN 199-1 Terminology associated with drawings and item lists DrawingsDIN ISO 128-20 Technical drawings General principles of presentation Part 20: Basic conventions for lines(ISO 128-20 : 1996)DIN ISO 128-
8、24 Technical drawings General principles of presentation Part 24: Lines on mechanical en-gineering drawings (ISO 128-24 : 1999)DIN ISO 128-40 Technical drawings General principles of presentation Part 40: Basic conventions for cutsand sections (ISO 128-40 : 2001)DIN ISO 5456-2 Technical drawings Pro
9、jection methods Part 2: Orthographic representations(ISO 5456-2 : 1996)DIN ISO 6428 Technical drawings Requirements for microcopying (ISO 6428 : 1982)Page 2DIN ISO 128-44 : 2002-05Page 1ISO 128-44 : 2001Technical drawings General principles of presentationPart 44: Sections on mechanical engineering drawingsPage 2ISO 128-44 : 2001Page 3ISO 128-44 : 2001Page 4ISO 128-44 : 2001Page 5ISO 128-44 : 2001Page 6ISO 128-44 : 2001Page 7ISO 128-44 : 2001Page 8ISO 128-44 : 2001
