1、A-A-L.53A 9999974 0366030 557 H A-A- 15 3A January 23, 1995 SUPERSEDING A-A-1 5 3 March 31, 1981 COMMERCIAIi ITEM DESCRIPTION DRAWERS, MENS The General Cervices Administration has authorized the use of this commercial item description in preference to MIL-D-40099. 1. SCOPE. This commercial item desc
2、ription covers the requirements for mens boxer-style drawers. intended for use by male personnel of the Department of Defense. The drawers are 2. CLASSIFICATION 2.1 The drawers shall be in the following types: Type I - Cotton, muslin cloth Type II - Polyester and cotton, white Class 1 White Class 2
3、Brown 3. SALIENT CHARACTERISTICS 3.1 The type I drawers shall be made from cotton, muslin cloth; the type II drawers shall be made from polyester and cotton cloth. The white drawers shall be bleached white in accordance with good commercial practices. shall be dyed Brown 436 in accordance with good
4、commercial practices. The drawers shall meet the breaking strength and dimensional stability requirements of ASTM-D 3820. The brown drawers Beneficial comments, recommendations, additions, deletions, clarifications, etc. and any data which may improve this document should be sent to: Defense Personn
5、el Support Center, Clothing and Textiles Directorate, Attn: DPSC-FQSD, 2800 South 20th Street, Philadelphia, PA 19145-5099. AMSC N/A FSC 8420 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without
6、 license from IHS-,-,-A-A-153A 9999974 OLbbO3L 493 9 The drawers shall be thigh length, boxer-style, with left-over- right front fly opening, a rectangular back panel, and an elastic waistband. The elastic shall be attached to the drawers with no less than 4 rows of stitching. The joining seams for
7、the back panel and the crotch seam shall be double lapped with two rows of stitching. The leg bottoms shall be hemmed, and there shall be a horizontal bartack at the bottom of the fly opening through all plies. The cotton thread for seaming and stitching the drawers shall conform to the requirements
8、 of type I, ticket number 50, 3-ply, and ticket number 70, 2-ply, of A-A-52094. As an alternate, a polyester-core, polyester or cotton-covered thread conforming to ticket number 100, 2-ply, of A-A-50199 may be used. The color of the thread shall approximate the shade of the basic material. As an alt
9、ernate to the specified threads, a 175 denier, single-ply, textured polyester thread with a minimum breaking strength of 1.4 pounds may be used. shall approximate the shade of the basic material. The elastic webbing for the waistband shall be made from heat- resistant strip compounded natural or syn
10、thetic rubber or mixture thereof, covered with 100% cotton or polyester and cotton or polyester rib fabric weighing a minimum of 0.50 ounces per linear yard. The width of the finished waistband shall be 1-1/4 (2 1/16) inches. shade of the basic material. The color of the thread The color of the webb
11、ing shall approximate the 3.2 Sizes and measurements. The finished drawer shall conform to the measurements below. TABLE I. Sizes and measurements (inches) Back 1/2 Waist 1/2 Waist Total Front rise (relaxed) (Stretched) length rise combined Size - i/ - 2/ - 3/ - 4/ - 5/ 4 26 28 30 32 34 36 38 40 42
12、44 46 48 50 52 10 11 12 13 14 15 16 17 18 19 20 21 22 23 16-1/2 17-1/2 18-1/2 19-1/2 20-1/2 21-1/2 22-1/2 23-1/2 24-1/2 25-1/2 26-1/2 27-1/2 28-1/2 29-1/2 16-1/4 16-1/2 16-3/4 17 17-1/4 17-1/2 17-3/4 18-1/4 18-1/2 18-3/4 19 19-1/4 19-1/2 18 12 12-1/4 12-1/2 12-3/4 13 13-1/4 13-1/2 13-3/4 14 14-1/4 1
13、4-1/2 14-3/4 15 15-1/4 18-1/4 18-1/2 18-3/4 19 19-1/4 19-1/2 20 20-1/2 21 21-1/2 22 22-1/2 23 23-1/2 Tol. - + 1/2 Minimum - + 1/4 - + 1/4 - + 1/4 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- A-A-153A 9999974 0366032 32T W A-A-153A TABLE I. Size
14、s and measurements (inches) (contd.) Width across Leg inseam bottom Size - 6/ - 7/ open- ing Thigh 81 e/ . 26 28 30 32 34 36 38 40 42 44 46 48 50 52 11-1/2 11-1/2 11-1/2 11-1/2 11-1/2 il-1/2 11-1/2 11-1/2 11-1/2 11-1/2 11-1/2 11-1/2 11-1/2 11-1/2 11-1/2 12 12-1/2 13 13-1/2 14 14-1/2 15 15-1/2 16 16-
15、1/2 17 17-1/2 18 6-1/2 6-3/4 7 7-1/4 7-1/2 7-3/4 8 8-1/4 8-1/2 8-3/4 9 9-1/4 9-1/2 9-3/4 13-1/2 14 14-1/2 15 15-1/2 16 16-1/2 17 17-1/2 18 18-1/2 19 19-1/2 20 + 1/2 - + 1/4 - + 1/4 Tol. - + 1/2 - - i/ 1/2 Waist (relaxed). Measured from side to side along top edge of waist. - 2/ 1/2 Waistband (stretc
16、hed). Measured from side to side along top edge of waist with waistband stretched taut in straight line using manual tension. - 3/ Total length. Measured from top edge of waist to lower edge of leg. - 4/ Front rise. Measured from bottom of crotch, including width of a seam, up front of drawers to to
17、p edge of waist. - 5/ Back rise. Measured from bottom of crotch, including width of seam, up back of drawers to.top edge of waist at center. - 6/ Width across inseam. Measured from inside corner of one leg to other leg. legs spread and inseam measured in straight line. - 7/ Leg bottom. Measured acro
18、ss leg along lower edge. - 8/ Fly opening. Measured from top of fly opening to bottom of fly opening. - 9/ Thigh. Measured from bottom of crotch seam across leg parallel to lower edge of leg to outside edge. 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from
19、IHS-,-,-A-A-153A 9999974 0166033 266 W 3.3 Label. A combination identification, care and size label shall be attached on the inside center of the back elastic just below the top edge of the waistband. 3.4 Label/taq. Each item shall be individually bar-coded with a paper tag for personal clothing ite
20、ms. shall be standard bleached sulfate having a basis weight of 100 pounds. The paper used for the tags shall have a smooth finish to accept thermal transfer and direct printing. The tags shall have a hole and shall be attached to each item by a fastener, clearly legible and readable by a scanner. e
21、lement shall be a 13 digit national stock number (NSN). code type shall be a medium to high code density and shall be located so that it is completely visible on the item when it is folded and/or packaged as specified and so that it causes no damage to the item. The paper tag The bar coding The bar
22、4. REGULATORY REQUIREMENTS 4.1 The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Fedora1 Acquisition Regulation (FAR). 5. QUALITY ASSURANCE PROVISIONS 5.1 Certification. The contractor shall certify and maint
23、ain substantiating evidence that the product offered meets the salient characteristics of this commercial item description; conforms to the producers own drawings, specifications, standards, and quality assurance practices; and is the same product offered for sale in the commercial marketplace. Gove
24、rnment reserves the right to require proof of such conformance prior to the first delivery and thereafter as may be otherwise provided for under the provisions of the contract. have been sold to the commercial market or to the Government, and the contractor shall certify and provide supporting docum
25、entation as to its serviceability and the long term (five years) availability of all necessary maintenance and logistics support parts and materials. warranty given to the commercial market beginning with the date of delivery of the individual items. The 5.2 Market acceptabilitv criteria. The item o
26、ffered must 5.3 Warranty. The item offered shall include the standard 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-5.4 Visual examination. Each drawer shall be examined for the defects listed below. Defects. part shaded; any spot or stain (outsi
27、de); raw edges, open seams, thread ends not removed, or loose tension resulting in loose seams; any material defects, distorted parts or poor workmanship; label missing, incorrect, or illegible; measurement of item not as specified; bar code omitted or not readable by scanner; human- readable interp
28、retation (HRI) omitted or illegible; bar code not visible on folded, packaged item; bar code causes damage to the item; any items not packaged in accordance with the contract or purchase order. Any hole, cut, or tear; color not as specified; any * i 6. PACKAGING 6.1 Preservation, Dackina, and markin
29、q. The preservation, packing, and marking shall be as specified in the contract or order. 7. NOTES 7.1 Source of Government documents. Copies of military and Federal documents are available from: Standardization Documents Order Desk Bldg. 4D 700 Robbins Avenue Philadelphia, PA 19111-5094 7.2 Source
30、of non-Government documents ASTM Test Methods (Applications for copies should be addressed to American Society For Testing and Materials, 1916 Race Street, Philadelphia, PA 19103-1187.) AATCC Test Method (Applications for copies should be addressed to American Association of Textile Chemists and Col
31、orists (AATCC), P.O. Box 12215, Triangle Park, NC 27709-2215.) Custodians: . Navy - NU Army - GL I Review Activities: Army - MD Civil Agency Coordinating Activity : GSA - FSS Preparing Activity: DLA - CT User Activity: Navy - MC Project No. 8420-0095 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-i- l I A-A-153A 9999974 0366035 A-A-153A 039 FRONT li BACK FIGURE 1 - DRAWERS, MENS 6 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
