1、INCH-POUNDA-A-5044715 January 1992“- . . - - ” -IItiUPUWKGLAL i LEM U,ESGKIYXLUNUHF, INCANDESCENT, T-4, CANDELABRA SCRSWThe General Services Administration has authorized the use of thisI commercial item description as a replacement for MS15581 which iscanceled.Abstract. This commercial item descrip
2、tion covers T-L incandescent lamps with acandelabra screw base. These lamps can be identified by industry numberllA/T4C(18) .Salient characteristics.Bulb designation T-4Bulb finish ClearBase designation Candelabra screwFilament type C-2VLight center length 15/16 inch(distance from the center of the
3、light source to thebottom base contact)Dimensions (See figure 1)FICWRE 1. J.ampdimensions (iriches1.I ;Beneficial comments, recommendations, additions, deletions, Iclarifications, and any other data which may improve “1Ithi, docent sh%d be sent by letter tO:Sea Systems Command,Commander, NavalAttn:
4、5523, Washington, DC 20362-5101.I JAMSC N/A FSC 6240DISTRIBUTION STATEME A. Approved for public release; distribution is unlimited,Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-XXX292. J.a.nmcharacteristics .CID Part number A504&7-1Industry num
5、ber llA/T4C(18)volts 18Amperes 0.11Lumen output (approx.) 10Hours life (approx.) 2000Contractor certification The contractor shall certify and maintain substantiat-ing evidence that the product offered meets the salient characteristics of thisCommercial Item Description and that the product conforms
6、 to the producers owndrawings, specifications, standards, and quality assurance practices. The gOvem-ment reserves the right to require proof of such conformance prior to firstdelivery and thereafter as may be otherwise provided for under the provisions ofthe contract.ReEUlatorv recwirements. The of
7、feror/contractor is encouraged to use recovereda75aterials in accordance with Public Law 94-580 to the a75aximum extent practical.P ese at-o acka “nr rv 1 n. D El K. uackine. E. =labelin and markin Presentation, packaging,packing, labeling, and marking shall be as specified in the contract or order.
8、1. Orderin data. Purchaser should(a) Title. number, and date ofspecify the following:this commercial item description.(b) CID part number required (see salient characteristics) .2. Cross reference to specification-based part numbers.CID part number A50447-1MS-based part number MS15581-1MILITARY INTERESTS :Custodians PreuarinP accivity:Army - ME Navy - SHNavy - SH (Project 6240-1272)Air Force - 99Review activitiesAir Force - 82DIA - GSProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
