1、A-A-50454 62 W 9999974 0063675 1 I I INCH-POUND I A-A- 50454 24 January 1992 COMMERCIAL ITEM DESCRIPTION LAMP, INCANDESCENT, G-6, BAYONET CANDELABRA, DOUBLE CONTACT The General Services Administration has authorized the use of this commercial item description as a replacement for MS15569 which is ca
2、nceled. Abstract. This commercial item description covers G-6 incandescent lamps with a bayonet candelabra base. specified in the notes section herein. These lamps can be identified by the industry numbers Salient characteristics. 1. Physical. - AMSC N/A Bulb designation G-6 Bulb finish (See lamp ch
3、aracteristics) Base designation Bayonet candelabra, Filament designation (See lamp characteristics) Light center length 13/16 inch double contact (distance from the center of the light source to the top of the base pins) Dimensions (See figure i) -.O06 .O06 FIGURE 1. Lamp dimensions (inches). Benefi
4、cial comments, recommendations, additions, deletions, clarifications, etc. and any other data which may improve this document should be sent by letter to: Commander, Naval Sea Systems Command, Attn: 5523, Washington, DC 20362-5101. FSC 6240 DISTRIBUTION STATEMENT A. Approved for public release; dist
5、ribution is unlimited Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-50454 fa2 9999974 006367b 3 A-A- 50454 2. Lamp characteristics. INDUSTRY CANDLE NUMBER POWER iE:R I I 2/ A50454- 1 3 t 8% 3 & 8% 6 & 9% 6 & 15% E$+- 6 & 15% A50449-8 304 6 DESI
6、GN DESIGN FILA- AVG.S VOLTS AMPS MENT LIFE TYPE (HOURS) 7.00 0.63 & 5% C-2R 1000 7 .O0 0.63 f 5% C-2R 1000 6.50 13.00 13.00 13.50 28.00 28.00 1.02 & 5% 0.58 1: 8% 0.58 8% .59 0.23 0.30 C-2R C-2R C-2R C-2R 2c-2v C-2F -I I I I I O - i/ R designates a red bulb finish. Other lamps have a clear bulb - 2/
7、 f inish. red coating is applied. For lamps A50454-2 and A50454-5, candle power applies to lamp before Contractor certification. ing evidence that the product offered meets the salient characteristics of this Commercial Item Description and that the product conforms to the producers own drawings, sp
8、ecifications, standards, and quality assurance practices. The govern- ment reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract. The contractor shall certify and maintain substantiat- Reau
9、latorv requirements. The offeror/contractor is encouraged to use recovered materials in accordance with Public Law 94-580 to the maximum extent practical. Preservation, packaging, packing, labeling. and marking. Preservation, packaging, packing, labeling, and marking shall be as specified in the con
10、tract or order. Notes. 1. Ordering data. Purchaser should specify the following: (a) Title, number, and date of this commercial item description. (b) CID part number required (see salient characteristics). 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IH
11、S-,-,-A-A-50454 62 9999974 0063677 5 A-A-50454 2. Cross reference to specification-based part numbers. NUMBER A50454- 1 A50454- 2 A50454- 3 A50454-4 A50454- 5 A50454- 6 A50454- 7 I A50454-8 MILITARY INTERESTS : Custodians Army - ME Navy - SH . Air Force - 99 MS INDUSTRY PART NUMBER NUMBER MS15569-1 MS15569-2 MS15569-3 MS 15 56 9 - 4 MS15569-5 90R MS15569 - 6 68 MS15569 - 7 1252 MS15569 - 8 304 PreparinE activity: Navy - SH (Project 6240-1264) Review activities Air Force - 82 DLA - GS 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
