1、A-A-55074 84 9999974 0087405 BbT W I INCH-POUND 1 A-A-5 5 074 11 August 1992 COMMERCIAL ITEM DESCRIPTION MAT, SLEEPING, SELF-INFLATING The General Services Administration has authorized the use of this Commercial Item Description. Abstract. This commercial item description covers a self- inflating s
2、leeping mat to insulate from the cold and moisture of bare ground when placed under a sleeping bag, and also to cushion soldiers from obtrusive objects when lying on the ground. 1. SALIENT CHARACTERISTICS. 1.1 Description. The self-inflating sleeping mat shall have a minimum outside dimensions of 20
3、 inches wide and 72 inches long. The mat shall be a minimum of 1 inch thick with no load and fully inflated. The mat shall be constructed of olive green nylon fabric fully bonded to urethane foam, the bonded fabric shall be 4.5 2 0.2 oz/sq.yd. The mat shall have a sealed seam of 1/4 + 1/8, -0 inch.
4、The mat shall be self-inflated when the plastic air valve is opened. Deflation of the mat shall be achieved by pushing air out through the plastic valve. The total weight of the mat shall not exceed 1.9 pounds. Each mat shall come with a repair kit consisting of four round 2-3/4 inches diameter, oli
5、ve green nylon patches, 0.20 fluid ounces of cement in a tube, and a repair instruction sheet. Care and use instruction shall be furnished with each mat. Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addres
6、sed to: Defense Personnel Support Center, Clothing and Textiles Directorate, Attn: DPSC-FSSD, 2800 South 20th Street, Philadelphia, PA 19101-8419, by using the Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. msc N/A FSC 8465 DISTRIBUTI
7、ON STATEMENT A. Approved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55074 84 9999974 0087406 7Tb A-A-5507 4 1.2 Label. A commercial type label is acceptable provided that an additional printed c
8、loth label containing the contractors name, contract number, and NSN is used. The commercial label shall include care instructions and fiber content information. 2. QUALITY ASSURANCE 2.1 Certification. The contractor shall certify, and maintain substantiating evidence, that the product offered meets
9、 the salient characteristics of this Commercial Item Description, and that the product conforms to the producers own drawings, specifications, standards, and quality assurance practices. The Government reserves the right to require proof of such conformance prior to first delivery thereafter as may
10、be otherwise provided for under the provisions of the contract. 2.2 Workmanship. The finished sleeping mat shall be thoroughly cleaned, and all loose thread, lint, and foreign matter removed. 2.3 Responsibility for Inspection. The supplier is responsible for assuring the product conforms to the requ
11、irements. Sleeping mat lots will be inspected to determine conformance with the Commercial Item Description and the successful offerers technical proposal as negotiated. Acceptability of sleeping mat lots will be determined by the use of “Sampling Procedures and Tables for Inspection by Attributes“,
12、 ANSI/ASQC 21.4, published by the American Society for Quality Control. Sampling procedures will be designated by the Government at the time of award. The sample is one sleeping mat. The sleeping mat shall be examined for commercial type defects only. 2.4 Requlatory reuuirements. The offeror/contrac
13、tor is encouraged to use recovered materials in accordance with Public Law 94-580 to the maximum extent practical. 3. PACKAGING 3.1 Packaqinq. Each mat shall be rolled tightly, or folded and rolled tightly. One rolled mat and one repair kit shall be packaged in a plastic bag conforming to type i or
14、II, style 1, 4 or 5 of PPP-B-26. 3.2 Packinq. Twelve mats shall be packed in a fiberboard box conforming to style RSC-L, variety SW or SF, with a DW liner, class domestic, grade 275 of PPP-B-636. The inside dimensions of the box shall be approximately 22-1/2 inches in length, 17 inches in width, and
15、 12 inches in depth. The box shall be closed in accordance with appendix of PPP-B-636. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55074 84 m 9999974 0087407 b32 m A-A-55074 3.3 Palletization. Boxes shall be palletized on a 4-way entry wing-t
16、ype pallet in accordance with load type Ia of MIL-STD-147. Pallet pattern shall be 3 in accordance with the appendix of MIL- STD-147. 3.4 Markinq. Marking shall be in accordance with MIL-STD-129. 4. NOTES 4.1 Orderinq data. Acquisition documents must specify the following: a. Title, number, and date
17、 of this document. b. When palletization is required (3.2). 4.2.1 Source of qovernment documents. Copies of military and federal documents are available from: Standardization Documents Order Desk Building 4D 700 Robbins Avenue Philadelphia, PA 19111-5094 4.2.2 Sources of non-qovernment documents. Co
18、pies of non- government documents are available from: American Society for Testing and Materials (ASTM) 1916 Race Street Philadelphia, PA 19103 Custodian: Army - GL Navy - NU Air Force - 99 Civil Agency Coordinating Activity: GSA - FSS Preparing Activity: DLA - CT Review Activities: Project No. 8465-0124 Navy - MC Air Force - 82 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
