DLA A-A-55570 1 C-2012 FUSEHOLDER EXTRACTOR POST IN-LINE TYPE ACCOMMODATES FAST ACTING AUTOMOTIVE BLADE TYPE INCLOSED LINK FUSES.pdf

上传人:tireattitude366 文档编号:686975 上传时间:2018-12-30 格式:PDF 页数:5 大小:84.10KB
下载 相关 举报
DLA A-A-55570 1 C-2012 FUSEHOLDER EXTRACTOR POST IN-LINE TYPE ACCOMMODATES FAST ACTING AUTOMOTIVE BLADE TYPE INCLOSED LINK FUSES.pdf_第1页
第1页 / 共5页
DLA A-A-55570 1 C-2012 FUSEHOLDER EXTRACTOR POST IN-LINE TYPE ACCOMMODATES FAST ACTING AUTOMOTIVE BLADE TYPE INCLOSED LINK FUSES.pdf_第2页
第2页 / 共5页
DLA A-A-55570 1 C-2012 FUSEHOLDER EXTRACTOR POST IN-LINE TYPE ACCOMMODATES FAST ACTING AUTOMOTIVE BLADE TYPE INCLOSED LINK FUSES.pdf_第3页
第3页 / 共5页
DLA A-A-55570 1 C-2012 FUSEHOLDER EXTRACTOR POST IN-LINE TYPE ACCOMMODATES FAST ACTING AUTOMOTIVE BLADE TYPE INCLOSED LINK FUSES.pdf_第4页
第4页 / 共5页
DLA A-A-55570 1 C-2012 FUSEHOLDER EXTRACTOR POST IN-LINE TYPE ACCOMMODATES FAST ACTING AUTOMOTIVE BLADE TYPE INCLOSED LINK FUSES.pdf_第5页
第5页 / 共5页
亲,该文档总共5页,全部预览完了,如果喜欢就下载吧!
资源描述

1、AMSC N/A FSC 5920 INCH-POUND A-A-55570/1C 19 April 2012 SUPERSEDING A-A-55570/1B 13 March 2007 COMMERCIAL ITEM DESCRIPTION SPECIFICATION SHEET FUSEHOLDER, EXTRACTOR POST, IN-LINE TYPE, ACCOMMODATES FAST ACTING, AUTOMOTIVE BLADE TYPE, INCLOSED LINK FUSES. The General Services Administration has autho

2、rized the use of this commercial item description (CID) for all federal agencies. The complete requirements for procuring the fuseholder described herein shall consist of this document and the issue in effect of A-A-55570. CLASSIFICATION/PART OR IDENTIFICATION NUMBER (PIN). This commercial item desc

3、ription (CID) specification sheet uses a classification system that is included in the PIN as shown in the following example (see NOTES). AA55570 /01 - 001 CID number Applicable CID specification sheet (two digits) Dash number (see table I) SALIENT CHARACTERISTICS. Interface and physical dimensions.

4、 Fuseholders supplied to this CID specification sheet shall be as specified herein (see figure 1). Ampere rating. The ampere rating shall be as specified in table I. Voltage rating. The voltage rating shall be 32 V dc. Ambient temperature. The ambient temperature shall be -40C to +85C. Mounting. Fus

5、eholders shall be capable of snap-mounting to panel from rear. Fuseholders shall also be capable of interlocking for multiple mounting (see figure 1). Molded parts material. The molded parts shall be black thermoplastic with a UL 94V2 flammability rating as a minimum. Terminal plating. Terminals sha

6、ll be tin plated brass. Use of pure tin plating is prohibited as a final finish and as an undercoat. Use of tin-lead (Sn-Pb) finishes are acceptable provided that the minimum lead content is 3 percent. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-

7、A-A-55570/1C 2 NOTES: 1. Dimensions are in inches. 2. Tolerance is .005 inch (0.13 mm), unless otherwise specified. FIGURE 1. Configuration and dimensions. Inches mm Inches mm .01 .025 .750 19.05 .04 1.02 .870 22.10 .078 1.98 1.06 26.92 .400 10.16 1.10 27.94 .410 10.41 1.19 30.23 .415 10.54 1.46 37.

8、08 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55570/1C 3 TABLE I. Electrical characteristics. CID dash number AA55570/01- Ampere rating Wire size Characteristics 001 20 amperes maximum Supplied with a 203.2 mm (8 inch) 14 gauge (AWG) wire lo

9、op. Accommodates CID AA55569/01-001 through AA55569/01-009 fuses. Fuse not supplied. 002 30 amperes maximum Supplied with a 203.2 mm (8 inch) 10 gauge (AWG) wire loop. Accommodates CID AA55569/01-010 and AA55569/01-011 fuses. Fuse not supplied. 003 3 Supplied with a 203.2 mm (8 inch) 10 gauge (AWG)

10、wire loop. Supplied with CID AA55569/01-003 fuse installed. 004 4 Supplied with CID AA55569/01-004 fuse installed. 005 5 Supplied with CID AA55569/01-005 fuse installed. 006 7.5 Supplied with CID AA55569/01-006 fuse installed. 007 10 Supplied with CID AA55569/01-007 fuse installed. 008 15 Supplied w

11、ith CID AA55569/01-008 fuse installed. 009 20 Supplied with CID AA55569/01-009 fuse installed. 010 25 Supplied with CID AA55569/01-010 fuse installed. 011 30 Supplied with a 203.2 mm (8 inch) 10 gauge (AWG) wire loop. Supplied with CID AA55569/01-011 fuse installed. NOTES. PIN. The PIN should be use

12、d for Government purposes to buy commercial products to this CID specification sheet. See the classification section for PIN format example. Source of documents. Other Publications UNDERWRITERS LABORATORIES, INCORPORATED (UL) UL 94 - Safety Tests for Flammability of Plastic Materials for Parts in De

13、vices and Appliances, Standard For. (Copies of this document is available online at http:/ or from the Underwriters Laboratories, Incorporated, 333 Pfingsten Road, Northbrook, IL 60062-2096.) (Industry association specifications and standards are generally available for reference from libraries. The

14、y are also distributed among technical groups and using Federal agencies.)Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55570/1C 4 Commercial products. As part of the market analysis and research effort, this CID specification sheet was coordin

15、ated with the following manufacturers of commercial products. At the time of CID specification sheet preparation and coordination, these manufacturers were known to have commercial products that would meet the requirements of this CID specification sheet. (NOTE: This information should not be consid

16、ered as a list of approved manufacturers or be used to restrict procurement to only the manufacturers shown.) MFRs CAGE MFRs name and address 75915 Littelfuse Incorporated 8755 W. Higgins Road; Suite 500 Chicago, IL 60631-2701 Phone number (800) 999-9445 Facsimile number (847) 391-0753 E-mail: mailt

17、o: Uniform Resource Locator (URL): http:/ Part number (P/N) supersession data. These CID specification sheet PINs supersede the following MFRs P/Ns as shown. This information is being provided to assist in reducing proliferation in the Government inventory system. TABLE III. P/N supersession data. C

18、ID dash number AA55570/01- (see table I) MFRs CAGE MFRs P/N 1/ 001 75915 155320A 002 75915 155430A 003 75915 155303A 004 75915 155304A 005 75915 155305A 006 75915 15537.5A 007 75915 155310A 008 75915 155315A 009 75915 155320A 010 75915 155425A 011 75915 155430A 1/ The manufacturers P/N shall not be

19、used for acquisition to the requirements of this CID specification sheet. At the time of preparation of this CID specification sheet, the aforementioned commercial products were reviewed and could be replaced by the CID P/N shown. For actual part marking requirements, see the marking paragraph of A-

20、A-55570. Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extensiveness of the changes. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55570/1C 5 MILI

21、TARY INTERESTS: CIVIL AGENCY COORDINATING ACTIVITY: GSA - FAS Custodians: Navy - EC Preparing activity: DLA - CC DLA-CC Project 5920-2012-020 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-

展开阅读全文
相关资源
猜你喜欢
  • DIN ISO 126-2008 Natural rubber latex concentrate - Determination of dry rubber content (ISO 126 2005) English version of DIN ISO 126 2008-06《天然胶乳浓缩物 干橡胶含量的测定》.pdf DIN ISO 126-2008 Natural rubber latex concentrate - Determination of dry rubber content (ISO 126 2005) English version of DIN ISO 126 2008-06《天然胶乳浓缩物 干橡胶含量的测定》.pdf
  • DIN ISO 12667-1995 Commercial vehicles and buses - Cross-tooth propeller shaft flanges type T (ISO 12667 1993)《商用车辆和公共汽车 T型交叉啮合万向传动轴法兰 (ISO 12667 1993)》.pdf DIN ISO 12667-1995 Commercial vehicles and buses - Cross-tooth propeller shaft flanges type T (ISO 12667 1993)《商用车辆和公共汽车 T型交叉啮合万向传动轴法兰 (ISO 12667 1993)》.pdf
  • DIN ISO 127-2014 Rubber natural latex concentrate - Determination of KOH number (ISO 127 2012)《天然浓缩橡胶乳胶 氢氧化钾值的测定 (ISO 127-2012)》.pdf DIN ISO 127-2014 Rubber natural latex concentrate - Determination of KOH number (ISO 127 2012)《天然浓缩橡胶乳胶 氢氧化钾值的测定 (ISO 127-2012)》.pdf
  • DIN ISO 1275-2012 Double-pitch precision roller chains attachments and associated chain sprockets for transmission and conveyors (ISO 1275 2006)《传动和输送机用双节距的精密滚子链 附件和相关链轮(ISO 1275-2.pdf DIN ISO 1275-2012 Double-pitch precision roller chains attachments and associated chain sprockets for transmission and conveyors (ISO 1275 2006)《传动和输送机用双节距的精密滚子链 附件和相关链轮(ISO 1275-2.pdf
  • DIN ISO 12772-2007 Laboratory glassware - Disposable microhaematocrit capillary tubes (ISO 12772 1997);English version of DIN ISO 12772 2007-06《实验室玻璃器皿 可处置微血球容量计毛细管》.pdf DIN ISO 12772-2007 Laboratory glassware - Disposable microhaematocrit capillary tubes (ISO 12772 1997);English version of DIN ISO 12772 2007-06《实验室玻璃器皿 可处置微血球容量计毛细管》.pdf
  • DIN ISO 12789-1-2013 Reference radiation fields - Simulated workplace neutron fields - Part 1 Characteristics and methods of production (ISO 12789-1 2008)《参考辐射区域 模拟工作场所中子区域 第1部分 生产.pdf DIN ISO 12789-1-2013 Reference radiation fields - Simulated workplace neutron fields - Part 1 Characteristics and methods of production (ISO 12789-1 2008)《参考辐射区域 模拟工作场所中子区域 第1部分 生产.pdf
  • DIN ISO 12789-2-2013 Reference radiation fields - Simulated workplace neutron fields - Part 2 Calibration fundamentals related to the basic quantities (ISO 12789-2 2008)《参考辐射区域 模拟工.pdf DIN ISO 12789-2-2013 Reference radiation fields - Simulated workplace neutron fields - Part 2 Calibration fundamentals related to the basic quantities (ISO 12789-2 2008)《参考辐射区域 模拟工.pdf
  • DIN ISO 128-1-2003 Technical drawings - General principles of presentation - Part 1 Introduction and index (ISO 128-1 2003)《技术图纸 图形画法的一般原则 第1部分 前言和索引》.pdf DIN ISO 128-1-2003 Technical drawings - General principles of presentation - Part 1 Introduction and index (ISO 128-1 2003)《技术图纸 图形画法的一般原则 第1部分 前言和索引》.pdf
  • DIN ISO 128-22-1999 Technical drawings - General principles of presentation - Part 22 Basic conventions and applications for leader lines and reference lines (ISO 128-22 1999)《技术制图.pdf DIN ISO 128-22-1999 Technical drawings - General principles of presentation - Part 22 Basic conventions and applications for leader lines and reference lines (ISO 128-22 1999)《技术制图.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1