1、A-A-55587 W 9999974 0365334 T58 = I t I INCH-POUND 1 A-A-55587 31 Oct 1994 SUPERSEDING MS27968B 21 Dec 1987 COMMERCIAL ITEM DESCRIPTION HINGE, BUTT, BROAD, NON-TEMPLATE The General Services Administration has authorized the use of this commercial item description for all Federal Agencies. a. This Co
2、mmercial Item Description (CID) covers commercial and industrial quality, broad, non-template butt hinges suitable for use on wood and hollow core doors. Salient characteris tics. FAST AND LOOSE PIN LB- -r A I NOT SWAGED, FOR FULL SURFACE APPLICATION 4 f f SWAGED, FOR MORTISE APPLICATION Beneficial
3、comments, recommendations, additions, deletions, clarifications, etc., and data which may improve this document should be sent to: Commander, U.S Army Annament Research, Development, and Engineering Center (ARDEC), ATTN: SMCAR-BAC-S, Picatinny Arsenal, NJ 07806-5000 AMSC NIA DISTRIBUTION STATEMENT A
4、. Approved for public release; distribution is unlimited. FSC 5340 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-5557 9999974 0165335 994 9 A-A-55587 TABLE I DASH NUMBER AND DIMENSIONS - 1/ SEE SAL. CHAR. 3 - 2/ SEE SAL. CHAR. 4 1. Material: Bo
5、dy: Steel, in accordance with ASTM A506, low carbon, cold rolled. Pin: Brass in accordance with ASTM B36, UNS numbers C26000, C26800, C27200, C28000 all HO4 hard temper or ASTM 3121 all specified UNS numbers with HO4 hard temper or corrosion-resistant steel, in accordance with ASTM A666. 2. Protecti
6、ve coating. zinc plated in accordance with ASTM B633, Type II, class Fe/Znl3. 3. Hardware. Hinges are furnished with wood screws. The sizes specified are those nonnaily furnished by the supplier. 4. Acceptable thickness for loose pin hinges. 5. &. The width dimension of not swaged hinge will be slig
7、htly narrower than shown. 6. All dimensions are in inches unless otherwise specified. 7. WorkmanshiD. The hinges furnished shall be free from imperfections which may impair durability or serviceability. Contractor certification. The contractor shall certify and maintain substantiating evidence that
8、the product offered meets the salient characteristics of this commercial item description, and that the product conforms to the producers own drawings, specifications, standards, and quality assurance practices. Items with known defects shail not be submitted for government acceptance. The Governmen
9、t reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract. Packaging. Packaging shall be in accordance with ASTM D3951. CID based art identification number. The following part identincation n
10、umbering procedure is for Government purposes and does not constitute a requirement for the contractor. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- A-A-55587 9999974 OLb533b A20 W t A-A-55587 Examale: AA 55587 - 2 Notes. a. Ordering data. Acqusi
11、tion documents must specify the following: 1. Title, number, and date of this CID. 2. Arrangements for first article inspection or whether first article is not required. 3. Applicable level and packaging requirements. b. Cross-reference data. Butt hinges conforming to this CID are interchangeable/su
12、stitute with butt hinges conforming to MS27968B dated 21 dec 1987. TABLE II. CROSS - REFERENCE TABLE. I CancelledMS PIN I Realacement CID PIN I t I MS27968 - * 21 AA55587-* 31 1 - 31 * represents the same designation codes for both MS and CID PINS. c. Regulaton reauirements. The offeror/ contractor
13、is encouraged to use recovered materials in accordance with Public Law 94-580 to the maximum extent practical. custodian: Army- AR, Navy- YD Air Force-99 Review activities: Army-AV, ME Navy-MC, SH Air Force-82 DLA-IS Preparing activity: Army-AR Agent: DLA-IS Project No. 5340-2182 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
