DLA A-A-55827 C-2010 CHROMIUM TRIOXIDE TECHNICAL.pdf

上传人:eventdump275 文档编号:687073 上传时间:2018-12-30 格式:PDF 页数:3 大小:51.82KB
下载 相关 举报
DLA A-A-55827 C-2010 CHROMIUM TRIOXIDE TECHNICAL.pdf_第1页
第1页 / 共3页
DLA A-A-55827 C-2010 CHROMIUM TRIOXIDE TECHNICAL.pdf_第2页
第2页 / 共3页
DLA A-A-55827 C-2010 CHROMIUM TRIOXIDE TECHNICAL.pdf_第3页
第3页 / 共3页
亲,该文档总共3页,全部预览完了,如果喜欢就下载吧!
资源描述

1、 AMSC N/A FSC 6810 Beneficial comments, recommendations, additions, deletions, clarifications, etc. and any data that may improve this document should be sent to: STDZNMGTdla.mil or by mail to Defense Supply Center Richmond, ATTN: DSCR-VEB, 8000 Jefferson Davis Highway, Richmond, VA 23297-5616. Sinc

2、e contact information can change, you may want to verify the currency of this address information using the ASSIST database at https:/assist.daps.dla.mil. A-A-55827C 24 March 2010 SUPERSEDING A-A-55827B 29 October 2009 COMMERCIAL ITEM DESCRIPTION CHROMIUM TRIOXIDE, TECHNICAL The General Service Admi

3、nistration has authorized the use of this commercial item description for all federal agencies. 1. SCOPE. This commercial item description (CID) covers technical grade chromium trioxide, Chemical Abstract Service Registry Number (CAS#) 1333-82-0. 2. CLASSIFICATION. The chromium trioxide shall confor

4、m to the following types (see 7.3.b): Type I Flake Type II - Crystalline 3. SALIENT CHARACTERISTICS. When tested using the methods and procedures described in the American Chemical Society (ACS) “Reagent Chemicals: Specifications and Procedures” (ACS 86-20569), the chromium trioxide shall meet the c

5、hemical requirements specified in table I. For type I, flake chromium trioxide, no more than 30 percent (by weight) shall pass through 600 m (No. 30) sieve conforming to ASTM E11. For type II, crystalline chromium trioxide, no more than 30 percent (by weight) shall pass through 420 m (No. 40) sieve

6、conforming to ASTM E11. TABLE I. Chemical requirements Item Specification Assay (as CrO3)99.5% Insolubles 0.10% Chlorides 0.10% Sulfate 0.20% METRIC Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55827C 2 4. REGULATORY REQUIREMENTS. 4.1 Recycled

7、 recovered or environmentally preferable materials. Items shall be labeled, packed and marked in accordance with Title 49 Code of Federal Regulations (CFR), parts 100 to 199. 4.2 Material safety data sheet. Manufacturers shall prepare and submit a material safety data sheet (MSDS) in accordance wit

8、h FED-STD-313. 5. QUALITY ASSURANCE PROVISIONS. 5.1 Product conformance. The products provided shall meet the salient characteristics of this commercial item description, conform to the producers own drawings, specifications, standards, and quality assurance practices, and be the same product offere

9、d for sale in the commercial market. The Government reserves the right to require proof of such conformance. 5.2 Market acceptability. The item offered must have been sold to the government or commercial market. 6. PACKAGING. For acquisition purposes, the chromium trioxide shall be preserved, packed

10、 and marked as specified in the contract or order (see 7.3.d). 7. NOTES. 7.1 Part identification number (PIN). The following part identification numbering procedure is for Government purposes and does not constitute a requirement for the contractor. A-A-55827 I Type I Flake II Crystalline CID numbe

11、r 7.2 Source of documents. 7.2.1 Copies of the Code of Federal Regulation (CFR) may be obtained form the U.S. Government Printing Office, 732 North Capital Street NW, Washington, DC 20401-0001 or online at www.gpo.gov. 7.2.2 Copies of federal standards are available online at https:/assist.daps.dla.

12、mil/quicksearch/ or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55827C 3 7.2.3 Copies of Chemical Abstract Service documents may be ob

13、tained from the Chemical Abstract Service, P.O. Box 3012, Columbus, OH 43210 or on line at www.cas.org. 7.2.4 Copies of American Chemical Society (ACS) documents may be obtained from the American Chemical Society, 1155 16thStreet NW, Washington, DC 20036 or online at www.acs.org. 7.2.5 Copies of AST

14、M documents may be obtained from ASTM International, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959 or online at www.astm.org. 7.3 Ordering data. Acquisition documents must specify the following: a. Title, number, and date of this document. b. Type of chemical required (type I or II, see 2.

15、). c. Unit quantity required. d. Preservation, packing and marking requirements (see 6). 7.4 National stock numbers (NSNs). The NSNs 6810-00-264-6517 and 6810-00-264-3939 correspond to this CID. These may not be the only NSNs associated with this document. CIVIL AGENCY COORDINATING ACTIVITIES: USDA-

16、APS VA-OSS GSA-FAS Custodians: Preparing Activity: Army EA DLA-GS3 Air Force 68 Navy AS DLA GS Reviewers: (Project 6810-2010-002) Army AR, MI, CR, MD1 Navy - OS NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-

展开阅读全文
相关资源
猜你喜欢
  • AECMA PREN 3897-1995 Aerospace Series Steel FE-WA4801 Filler Metal for Welding Edition P1《航空航天系列.FE-WM1501钢填充金属焊接.P1版》.pdf AECMA PREN 3897-1995 Aerospace Series Steel FE-WA4801 Filler Metal for Welding Edition P1《航空航天系列.FE-WM1501钢填充金属焊接.P1版》.pdf
  • AECMA PREN 3899-2000 Aerospace Series Inserts Thickwall Self-Locking MJ Threads in Heat Resisting Steel FE-PM3801 (17-4PH) Technical Specification Edition P 1《航空航天系列插入自锁MJ螺纹耐热钢FE-P.pdf AECMA PREN 3899-2000 Aerospace Series Inserts Thickwall Self-Locking MJ Threads in Heat Resisting Steel FE-PM3801 (17-4PH) Technical Specification Edition P 1《航空航天系列插入自锁MJ螺纹耐热钢FE-P.pdf
  • AECMA PREN 3902-1995 Aerospace Series Washers for Rivet Assemblies in Aluminium Alloy Anodized Metric Series Edition P1《航空航天系列用于柳钉的垫圈铝合金阳极处理米制.P1版》.pdf AECMA PREN 3902-1995 Aerospace Series Washers for Rivet Assemblies in Aluminium Alloy Anodized Metric Series Edition P1《航空航天系列用于柳钉的垫圈铝合金阳极处理米制.P1版》.pdf
  • AECMA PREN 3903-1995 Aerospace Series Washers Laminated in Corrosion Resisting Steel Edition P1《航空航天系列层压防腐蚀钢垫圈.P1版》.pdf AECMA PREN 3903-1995 Aerospace Series Washers Laminated in Corrosion Resisting Steel Edition P1《航空航天系列层压防腐蚀钢垫圈.P1版》.pdf
  • AECMA PREN 3904-1995 Aerospace Series Washers Wire Locking in Aluminium Alloy Anodized Edition P1《航空航天系列线锁垫圈铝合金阳极处理.P1版》.pdf AECMA PREN 3904-1995 Aerospace Series Washers Wire Locking in Aluminium Alloy Anodized Edition P1《航空航天系列线锁垫圈铝合金阳极处理.P1版》.pdf
  • AECMA PREN 3905-1997 Aerospace Series Six Lobe Recesses for Bolts Technical Specification Edition P 1《航空航天系列内六花沉头自攻螺钉技术规范》.pdf AECMA PREN 3905-1997 Aerospace Series Six Lobe Recesses for Bolts Technical Specification Edition P 1《航空航天系列内六花沉头自攻螺钉技术规范》.pdf
  • AECMA PREN 3906-1994 Aerospace Series Martensitic Corrosion Resisting Steel FE-PM3801 Air Melted Solution Treated Bar D is Less Than or Equal to 50 mm for the Manufacture of Fasten.pdf AECMA PREN 3906-1994 Aerospace Series Martensitic Corrosion Resisting Steel FE-PM3801 Air Melted Solution Treated Bar D is Less Than or Equal to 50 mm for the Manufacture of Fasten.pdf
  • AECMA PREN 3907-1994 Aerospace Series Bolts Double Hexagon Head Normal Shank Long Thread in Titanium Alloy TI-P63 MoS2 Coated Classification 1 100 MPa (at Ambient Temperature) 350 .pdf AECMA PREN 3907-1994 Aerospace Series Bolts Double Hexagon Head Normal Shank Long Thread in Titanium Alloy TI-P63 MoS2 Coated Classification 1 100 MPa (at Ambient Temperature) 350 .pdf
  • AECMA PREN 3908-1999 Aerospace Series Nipples Lubricating Axial Type in Corrosion Resisting Steel Passivated Edition P 2《航空航天系列.钝化耐腐蚀钢润滑轴向喷嘴》.pdf AECMA PREN 3908-1999 Aerospace Series Nipples Lubricating Axial Type in Corrosion Resisting Steel Passivated Edition P 2《航空航天系列.钝化耐腐蚀钢润滑轴向喷嘴》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1