1、A-A-59327 INCHPOUND A-A-59327 27 August 2003 _ COMMERCIAL ITEM DESCRIPTION DRAWERS, MID WEIGHT, SPEAR System, Lightweight Environmental Protection (LEP), Layer-2 1. SCOPE 1.1 Scope. This Commercial Item Description covers the requirements for Layer 2-Midweight Drawers fabricated in 100% Visa Polyest
2、er Double Knit Interlock to wick moisture / perspiration away from the body. The drawers are intended for wear by male and female military personnel of the Department of Defense as an insulation layer of the Extended Cold Weather Clothing System (ECWCS). 2. CLASSIFICATION The Drawers shall be color
3、Black 470 or Camouflage Green 483, as specified. The drawers shall be of one type in the following sizes as specified: SCHEDULE OF SIZES Small- Regular Medium-Regular Large-Regular Large-Long Extra Large-Regular Extra Large-Long. Beneficial comments (recommendations, additions, deletions) and any pe
4、rtinent data which may be of use in improving this document should be addressed to: Defense Supply Center Philadelphia, Clothing and Textiles Directorate, Attn: DSCP-COCT, 700 Robbins Ave Philadelphia, PA 19111-5096. AMSC N/A FSC 8415 DISTRIBUTION STATEMENT A. Approved for public release; distributi
5、on is unlimited. 1Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59327 3. SALIENT CHARACTERISTICS 3.1 Design and Construction. The Drawers have an elastic waistband and access fly. All joining seam shall be flat locked construction to reduce cha
6、ffing and comfort in movement. 3.2 Basic Material. The following material shall be used to provide the environmental protection, user comfort; lightweight and durability needed for wear in field, combat, and operations other than war. The basic material for the drawers shall be 100% polyester double
7、 knit interlock, Milliken Visa style# 696374 or product with equivalent performance characteristics. The contracting officer must approve any alternate material with equivalent performance characteristics. The fabric shall be Black or Camouflage Green (CG-483). The material provides the required mil
8、itary appearance and functionality required by the military. The fabric shall conform to the following requirements: Fabric Specifications Characteristic Requirement Test Method Fiber Content 100% Visa Polyester. Yarn Source U.S.A. Construction Double Knit Interlock Width 60 inches minimum 62 inches
9、 maximum Weight per square yard Weight per linear yard 5.65 +/- .25 ounces 9.75 +/- .25 ounces ASTM D-3776 Pilling 1.0 for 30 minutes after 1 wash ASTM D-3512, Random Tumble Method Soil release (after 5 washes) 4.0 AATCC TM 135-3 cycles, 2, III, A iii Moisture transport (after 5 washes) 1.0 vs a sta
10、ndard of = 5.0 AATCC TM 135-3 cycles, 2, III, A iii Stretch Wales - 16.5% Courses - 92.5% ASTM 2594, Form fit Dimensional Stability Wales - 2.8% max. Courses - 4.0% max. AATCC TM 135-3 cycles, 2, III, A iii Air permeability test 395 cu.ft./min/sq.ft. ASTM D-737 Water Vapor Transmission Test Run unde
11、r test conditions of 70 F and 50% RH for 24 hours (upright); calculations for the loss per sq. meter over 24 hour period = 330.3 grams. ASTM E96 Colorfastness: Laundering Crocking, Dry comfort and durability in use during field duties, combat, and operations other than war. End item garments constru
12、ction and appearance shall conform to Figure 1Drawers. 3.4.1 Seaming. The seams shall be consistent, exhibit a uniform appearance and conform to ASTM D-6193, Stitch and Seam Types listed in the Construction of Drawers Table below. All material edges shall not ravel. TABLE II. Construction of Drawers
13、 No. Operation Stitch Type Seam TypeDRAWERS 1. 2. 3. 4. 5. 6. Hem the edge of two fly opening pieces. Set fly pieces to front of body. Set waistband webbing flat. Close legs inseam and back (seat) seam. Hem 5/8 inch 1/8 inch bottom of the legs. Sew four sides of both labels (size and care) inside wa
14、istband.605 607 403 607 605 301 EFa-2 FSa-1 LSa-2 FSa-1 EFa-2 SSa-1 4. REGULATORY REQUIREMENTS 4.1 Recycled, Recovered, or Environmentally Preferable Materials. Recycled, recovered, or environmentally preferable materials should be used to the maximum extent possible provided that the material meets
15、 or exceeds the operational and maintenance requirements, and promotes economically advantageous life cycle costs. 5. PRODUCT CONFORMANCE 5.1 Product Conformance. The products provided shall meet the salient characteristics of 5Provided by IHSNot for ResaleNo reproduction or networking permitted wit
16、hout license from IHS-,-,-A-A-59327 this commercial item description, and shall conform to the cited patterns, specifications, standards and quality assurance practices. The Government reserves the right to require proof of such conformance. 5.2 Quality Conformance Inspection. Sampling for inspectio
17、n shall be performed in accordance with ANZI/ASQCZ1.4, as defined by contract, except where otherwise indicated. 5.3 Component and End Item Inspection. In accordance with 3.2 and 5.1, components and end items shall be tested in accordance with all the requirements of referenced documents unless othe
18、rwise excluded, amended, modified, or qualified in this document or applicable procurement documents. The Government reserves the right to inspect all components and end items to determine conformance to requirements. 5.4 End Item Visual Examination. The Drawers shall be examined for the major defec
19、ts listed below. EXAMINATION DEFECT Component part omitted, distorted, full, tight, or twisted; any part of Underwear caught in any unrelated stitching, the edge of any component part required to be forced out having folds of more than 1/8 inch. Hole, cut, tear, smash, burn, drill hole, run, thin pl
20、ace, dye streak, color not as specified, misweave affecting appearance or serviceability. Material and Workmanship Seam: puckered, distorted, pleated, wavy, twisted, irregular or open, loose or tight stitch tension, broken or missing thread or stitch, needle chew, visible mend, edge or raised stitch
21、ing sewn too close to edge, resulting in damage to cloth, seam allowance not as specified, raw edge affecting appearance or serviceability Shade Shade variation within a part or between parts. Thread color not as specified. Cleanness Spot, stain, excessive thread ends not trimmed or removed, odor, a
22、ffecting appearance or serviceability. Labels Omitted, incorrect, illegible, not attached where specified; bar-codes omitted, not readable by scanner; human-readable interpretation (HRI) omitted or illegible; bar- code not visible on folded, packaged item; bar- code attachment causes damage to the i
23、tem. Packaging Any Drawers not packaged in accordance with the contract or purchase order. 6Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59327 5.5 Finished Dimensions. The finished Midweight Drawers shall conform to the measurements in inches
24、listed in the Table-III. Table III. Drawers Finished Measurements SIZE 1/2 - WAIST (1) INSEAM (2) SMALL 12” 28” MEDIUM 13-1/2” 30”LARGE 15” 31”X-LARGE 16-1/2” 32” LARGE-LONG 15” 34”X-LARGE-LONG 16-1/2” 35” TOLERANCE 1/2” 1/2” (1) Waist measurement taken folded edge to folded edge with garment laid f
25、lat. (2) Inseam measurement taken from intersection of fly and lower leg of drawer with garment laid flat and no puckering. Fly Opening: 4-1/2 inches, 1/4 inch, for all sizes. 6. PACKAGING 6.1. Packaging, Packing, Marking and Palletization. Packaging, packing marking and palletization shall be in ac
26、cordance with ASTM D 3951. Each pair of drawers shall be packed individually in a plastic bag and thirty (30) drawers shall be packed in each box. If needed, mixed sizes and small boxes may be used to complete a shipment. 6.2 Marking. Marking shall be in accordance with MIL-STD-129. 7. NOTES (This s
27、ection contains information of a general or explanatory nature that may be helpful, but is not mandatory unless otherwise stated in the contract or purchase order.) 7.1 Intended use: The drawers are for wear by military personnel of the Department of Defense. They are intended for Special Operations
28、 Forces Personal Equipment Advance Requirements (SPEAR). They are used as an insulation layer of the Extended Cold Weather Clothing System in field, combat, and operations other than war. 7.2 Acceptance criteria. Sampling for inspection shall be in accordance with ANZI/ASQC Z1.4. The end items shall
29、 be examined for visual defects listed in paragraph 5.4. The lot size shall be expressed in units of drawers. The sample unit will be one pair of drawers. The inspection level shall be II and the acceptable quality level (AQL), expressed in terms of 7Provided by IHSNot for ResaleNo reproduction or n
30、etworking permitted without license from IHS-,-,-A-A-59327 defects per hundred units, shall be 2.5 for major defects. The end item shall be examined for dimensional conformance in accordance with paragraph 5.5. Any dimension not within the specified tolerance shall be classified as a defect. The lot
31、 size shall be expressed in units of drawers. The sample size shall be one pair of drawers. The inspection level shall be S-3 and the AQL, expressed in terms of defects per hundred units, shall be 4.0. Requirements for this acceptance criterion shall be referenced in the contract or purchase order.
32、7.3 Government documents. 7.3.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents shall be those listed in the issue of the Acquisitio
33、n Streamlining and Standardization Information System (ASSIST) database cited in the solicitation. SPECIFICATIONS Commercial Item Description (CIDS) A-A-52095 - Thread, Polyester, Textured A-A-55634 - Zippers (Fasteners, Slide Interlocking) Source of Government documents. Copies of Military and Fede
34、ral documents are available from: Standardization Documents Order Desk Bldg 4D 700 Robbins Avenue Philadelphia, PA 19111-5094 7.3.2 Other Government documents, drawings, and publications. The following Government documents, drawings, and publications form a part of this document to the extent specif
35、ied herein. Unless otherwise specified, the issues are those specified in the solicitation. Code of Federal Regulations (Applications for copies should be addressed to U.S. Government Printing Office, Superintendent of Documents, Mail stop: SSOP, Washington, DC 20402-9328.) 7.3.3 Non-Government publ
36、ications. The following documents form a part of this document to the extent specified herein. Unless otherwise specified, the issue of documents, which are DoD adopted, shall be those in the issue of the Acquisition Streamlining and Standardization 8Provided by IHSNot for ResaleNo reproduction or n
37、etworking permitted without license from IHS-,-,-A-A-59327 Information System (ASSIST) database cited in the solicitation. Unless otherwise specified, the issues of documents not listed in the ASSIST are the documents cited in the solicitation. AMERICAN SOCIETY FOR TESTING AND MATERIALS (For all inq
38、uires please contact the American Society for Testing and Materials, 100 Barr Harbor, West Conshohocken, PA 19428-2959). Website address http:/www.astm.org ASTM D 3776 Standard Test Method for Mass Per Unit Area (Weight) of Fabric ASTM D 737 Standard Test Method for Air Permeability of Textile Fabri
39、cs ASTM D 6193 Standard Test Method for Stitches and Seams ASTM D 3512 Standard Test Method for Pilling ASTM D 2594 Standard Test Method for Tension of Elastic Textiles ASTM D 3951 Standard Test Method for Commercial Packaging ASTM D 204 Standard Test Method for Sewing Threads AMERICAN ASSOCIATION O
40、F TEXTILE CHEMISTS AND COLORISTS (For all inquires please contact the American Association of Textile Chemists and Colorists, P.O. Box 12215, Triangle Park, NC 27709-2215). Website address http:/www.aatcc.org AATCC TM 61 Colorfastness to Laundering, Home and Commercial: Accelerated AATCC TM 8 Colorf
41、astness to Crocking: AATCC Crockmeter Method AATCC 15 Colorfastness to Perspiration AATCC TM16 Colorfastness to Light AATCC TM 135 Dimensional Changes in Automatic Home Laundering of Woven and Knit Fabrics ANSI/ASCQ Z1.4- Sampling Procedures and Tables for Inspection of Attributes (For all inquires
42、please contact the American National Standards Institute, 25 West 43rdStreet, 4thFloor, New York, NY 10036). Website address http:/www.ansi.org. 7.3.4 Source of supply. Sources of suggested supply for the Visa Polyester 1/ Milliken & Co. 920 Milliken Road Spartenburg, NC 29303 Note: The contracting
43、officer must approve any alternate material with equivalent performance characteristics. 1/ Visa Performance Characteristics Visa is a registered trademark of Milliken & Co. 9Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59327 Visa adds value b
44、y offering three key benefits: 1. Moisture wicking - Visa polyester is hydrophilic. It wicks perspiration away from the skin, moving moisture to the outer surface of the garment where it evaporates. 2. Soil release - Skip the pretreatments. Visa is machine washable, releasing stubborn stains and odo
45、rs without pretreatments. 3. Prevents soil redeposition - Visa prevents dirt and oil transfer in the wash cycle. With no soil redeposition, Visa color stay bright and whites stay white wash after wash. Do not use fabric softeners on Visa polyester. Additional benefits of Visa polyester: Superior dur
46、ability, Wrinkle resistance, Unbeatable color retention, Benefits wont wear or wash out. Apparel retains original weight, body and shape. MILITARY INTERESTS: Custodians: PREPARING ACTIVITY: Army - GL DLA - CT Navy - MC Project 8415-0251 CIVIL AGENCY COORDINATING ACTIVITY: GSA - FSS 10Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59327 11Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
