1、 AMSC N/A FSC 8465 A-A-59900 August 12, 2012 COMMERCIAL ITEM DESCRIPTION AXE, ICE REPLACEMENT KIT The General Services Administration has authorized the use of this commercial item description for all Federal agencies. 1. SCOPE. This Commercial Item Description (CID) covers the requirements for a ki
2、t that replaces the ice axes that are issued in the Snow and Mobility Kit (SIMK) (A-A-59872). 2. CLASSIFICATION. The AMK Axe, Ice Replacement Kit will be furnished as one kit. 3. SALIENT CHARACTERISTICS. The kit shall be composed of the following items in the following quantities as listed in Table
3、I: TABLE I. List of items in kits 3.1 Dimensions. Individual item dimensions will be in accordance with drawings and specification requirements specified in the applicable CID document (see Table I) unless item is a manufacturers part number/cage code then, in which manufacturers current specificati
4、ons apply. 3.2 Color. Individual item colors will be in accordance with applicable specifications (see Table I). 3.3 End item testing. Individual item test standards will be in accordance with their related International Climbing and Mountaineering Federation Standards, where applicable. Comments, s
5、uggestions, or questions on this document should be addressed to: Attn: DLA Troop Support, Standardization Team, 700 Robbins Avenue, Philadelphia, PA 19111-5096. Since contact information can change, you may want to verify the currency of this address information using Acquisition Streamlining and S
6、tandardization Information System (ASSIST) online database at https:/assist.dla.mil. Item Name CID Type Size Quantity Axe, Ice A-A-59843 I 3 5 Carabiner A-A-59836 X - 1 METRIC Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59900 2 3.4 Materials.
7、 Individual item materials will be in accordance with applicable specifications (see Table I). 3.5 Workmanship. The Axe, Ice Replacement Kits shall conform to the quality of product established by this document. The occurrence of defects shall not exceed the contractors own quality assurance standar
8、ds and the quality assurance standards defined in the technical data in the solicitation and/or contract. 3.6 Service life. The Axe, Ice Replacement Kits shall have no unexpected material or component failures during a continuous one-year cycle. The Axe, Ice Replacement Kits shall have no unexpected
9、 material or component failures during periodic use over a five year period. 3.7 Labels/barcoding/instruction slip. If applicable, all labeling, barcoding and instruction slip requirements shall be as specified in the solicitation or contract (see 7.2). 3.7.1 Labels. Each Axe, Ice, Replacement Kit s
10、hall have identification label Class 5 conforming to Type VI of MIL-DTL-32075. The color of the label shall be white. The following information shall be included in the printing for the identification label: AXE, ICE REPLACEMENT KIT NSN: XXXX-XX-XXX-XXXX (Example) The following instruction informati
11、on shall be supplied: a. The name or trademark of the manufacturer, importer or supplier b. The meaning of any marking on the product c. The use of the product d. How to choose other components for use in the system e. How to maintain and service the product f. The lifespan of the product or how to
12、access it g. The effects of chemical reagents and temperature on the product h. The effects of storing and aging i. Identification of the model, if more than one model is available 4. REGULATORY REQUIREMENTS. The offeror/contractor is encouraged to use recovered materials to the maximum extent pract
13、icable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR). 4.1 Recycled, recovered, or environmentally preferable materials. Recycled, recovered, or environmentally preferable materials should be used to the maximum extent possible, provided that the material meets or e
14、xceeds the operational and maintenance requirements and promotes economically advantageous life cycle costs. 5. PRODUCT CONFORMANCE PROVISIONS. 5.1 Product conformance. The products provided shall meet the salient characteristics of this Commercial Item Description, conform to the producers own draw
15、ings, specifications, standards, and quality assurance practices, and be the same product offered for sale in the Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59900 3 commercial marketplace. The Government reserves the right to require proof o
16、f such conformance. 5.2 End item examination. Each kit shall be examined for the following defects as listed in Table II: TABLE II. End item examination Examine Defect Description Components Missing components Incorrect item, size, type or color 5.3 Acceptance criteria. Acceptance criteria shall be
17、as specified in the contract or purchase order (see 7.2). 6. PACKAGING. 6.1 Preservation, packing and marking. The preservation, packing and marking shall be as specified in the contract or order (see 7.2) and as below. 7. NOTES. 7.1 Sources of Government documents. 7.1.1 Copies of Government docume
18、nts are available online at https:/assist.dla.mil/quicksearch/ or from the Standardization Documents Order Desk, Building 4D, 700 Robbins Avenue, Philadelphia, PA 19111-5094. 7.1.2 Federal Acquisition Regulations are available online at http:/acquisition.gov/far/index.html or by contacting the Super
19、intendent of Documents at 202-512-1800. 7.2 Ordering data. The contract or order should specify the following: a. Title, number, and date of this Commercial Item Description. b. When required, labeling, barcoding and instruction slip (see 3.7) c. Acceptance criteria (see 5.3) d. Packaging (see 6.1)
20、7.3 National Stock Numbers (NSNs). The following is a list of NSNs Sizes and Types associated with Type I, to determine the required items for the replacement kit that corresponds to A-A-59843, Axe, Ice and A-A-59836, Carabiner, listed below: NSNs SIZE TYPE ITEM 8465-01-578-7741 3 I Axe, Ice 8465-01
21、-578-8906 X Carabiner Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59900 4 7.4 Key words. Climbing MILITARY INTERESTS: CIVIL AGENCY COORDINATING ACTIVITY: Custodians: GSA-FSS Army GL Navy -MC PREPARING ACTIVITY: DLA-CT Project Number: 8465-201
22、2-010 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil/. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
