1、 AMSC N/A FSC 8465 A-A-59901 August 9, 2012 COMMERCIAL ITEM DESCRIPTION BELAY DEVICE, MOUNTAINEERING REPLACEMENT KITS The General Services Administration has authorized the use of this commercial item description for all Federal agencies. 1. SCOPE. This Commercial Item Description (CID) covers the r
2、equirements for a kit that replaces the belay devices that are issued in the Army Mountaineering Kits (AMKs); the High Angle Mountaineering Kit (HAMK) (A-A-59869) and the Assault Climber Team Kit (ACTK) (A-A-59873). 2. CLASSIFICATION. The Belay Device, Mountaineering Replacement Kits will be furnish
3、ed as two kits. 2.1 Types: Type I HAMK Belay Device, Mountaineering Replacement Kit Type II ACTK Belay Device, Mountaineering Replacement Kit 3. SALIENT CHARACTERISTICS. The kit shall be composed of the following items in the following quantities as listed in Table I: TABLE I. List of items in kits
4、Comments, suggestions, or questions on this document should be addressed to: Attn: DLA Troop Support, Standardization Team, 700 Robbins Avenue, Philadelphia, PA 19111-5096. Since contact information can change, you may want to verify the currency of this address information using Acquisition Streaml
5、ining and Standardization Information System (ASSIST) online database at https:/assist.dla.mil. Item Name CID Type Replacement Kit Quantities Type I Type II Belay Device, Mountaineering A-A-59842 - 10 3 Carabiner A-A-59836 H(1) 1 1 METRIC Provided by IHSNot for ResaleNo reproduction or networking pe
6、rmitted without license from IHS-,-,-A-A-59901 2 3.1 Dimensions. Individual item dimensions will be in accordance with drawings and specification requirements specified in the applicable CID document (see Table I) unless item is a manufacturers part number/cage code then, in which manufacturers curr
7、ent specifications apply. 3.2 Color. Individual item colors will be in accordance with applicable specifications as specified in Table I. 3.3 End item testing. Individual item test standards will be in accordance with their related International Climbing and Mountaineering Federation Standards, wher
8、e applicable. 3.4 Materials. Individual item materials will be in accordance with applicable specifications as specified in Table I. 3.5 Workmanship. The Belay Device, Mountaineering Replacement Kits shall conform to the quality of product established by this document. The occurrence of defects shal
9、l not exceed the contractors own quality assurance standards and the quality assurance standards defined in the technical data in the solicitation and/or contract. 3.6 Service life. The Belay Device, Mountaineering Replacement Kits shall have no unexpected material or component failures during a con
10、tinuous one-year cycle. The Belay Device, Mountaineering Replacement Kits shall have no unexpected material or component failures during periodic use over a five year period. 3.7 Labels/barcoding/instruction slip. If applicable, all labeling, barcoding and instruction slip requirements shall be as s
11、pecified in the solicitation or contract (see 7.2). 3.7.1 Labels. Each Belay Device, Mountaineering, Replacement Kit shall have identification label Class 5 conforming to Type VI of MIL-DTL-32075. The color of the label shall be white. The following information shall be included in the printing for
12、the identification label: BELAY DEVICE, MOUNTAINEERING REPLACEMENT KIT NSN: XXXX-XX-XXX-XXXX (Example) The following instruction information shall be supplied: a. The name or trademark of the manufacturer, importer or supplier b. The meaning of any marking on the product c. The use of the product d.
13、 How to choose other components for use in the system e. How to maintain and service the product f. The lifespan of the product or how to access it g. The effects of chemical reagents and temperature on the product h. The effects of storing and aging i. Identification of the model, if more than one
14、model is available Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59901 3 4. REGULATORY REQUIREMENTS. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the F
15、ederal Acquisition Regulation (FAR). 4.1 Recycled, recovered, or environmentally preferable materials. Recycled, recovered, or environmentally preferable materials should be used to the maximum extent possible, provided that the material meets or exceeds the operational and maintenance requirements
16、and promotes economically advantageous life cycle costs. 5. PRODUCT CONFORMANCE PROVISIONS. 5.1 Product conformance. The products provided shall meet the salient characteristics of this Commercial Item Description, conform to the producers own drawings, specifications, standards, and quality assuran
17、ce practices, and be the same product offered for sale in the commercial marketplace. The Government reserves the right to require proof of such conformance. 5.2 End item examination. Each kit shall be examined for the following defects as listed in Table II: TABLE II. End item examination Examine D
18、efect Description Components Missing components Incorrect item, size, type or color 5.3 Acceptance criteria. Acceptance criteria shall be as specified in the contract or purchase order (see 7.2). 6. PACKAGING. 6.1 Preservation, packing and marking. The preservation, packing and marking shall be as s
19、pecified in the contract or order (see 7.2) and as below. 7. NOTES. 7.1 Sources of Government documents. 7.1.1 Copies of Government documents are available online at https:/assist.dla.mil/quicksearch/ or from the Standardization Documents Order Desk, Building 4D, 700 Robbins Avenue, Philadelphia, PA
20、 19111-5094. 7.1.2 Federal Acquisition Regulations are available online at http:/acquisition.gov/far/index.html or by contacting the Superintendent of Documents at 202-512-1800. 7.2 Ordering data. The contract or order should specify the following: Provided by IHSNot for ResaleNo reproduction or net
21、working permitted without license from IHS-,-,-A-A-59901 4 a. Title, number, and date of this Commercial Item Description. b. When required, labeling, barcoding and instruction slip (see 3.7) c. Acceptance criteria (see 5.3) d. Packaging (see 6.1) 7.3 National Stock Numbers (NSNs). The following is
22、a list of NSNs and Types associated for Type I, to determine the required items for the replacement kit that corresponds to A-A-59842, Belay Device, Mountaineering, listed below: NSNs TYPE ITEM 8465-01-578-7850 - Belay Device Mountaineering 8465-01-578-8898 H(1) Carabiner 7.4 Key words. Climbing MIL
23、ITARY INTERESTS: CIVIL AGENCY COORDINATING ACTIVITY: Custodians: GSA-FSS Army GL Navy -MC PREPARING ACTIVITY: DLA-CT Project Number: 8465-2012-011 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil/. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
