1、 AMSC N/A FSC 8465 A-A-59933 12 September 2013 COMMERCIAL ITEM DESCRIPTION ARMY MOUNTAINEERING KIT (AMK) CHOCK PICK REPLACEMENT KIT The General Services Administration has authorized the use of this commercial item description for all Federal agencies. 1. SCOPE. This Commercial Item Description (CID
2、) covers the requirements for a kit that replaces unserviceable chock picks that are issued in the Army Mountaineering Kit (AMKs) specifically the Assault Climber Team Kit (ACTK) (A-A-59873). 2. CLASSIFICATION. The Army Mountaineering Kit (AMK) Chock Pick Replacement Kit will be furnished as one kit
3、. 3. SALIENT CHARACTERISTICS. The Kit shall be composed of the following items in the following quantities as listed in Table I: TABLE I. List of items in Kit 3.1 Dimensions. Individual item dimensions shall be in accordance with drawings and specification requirements specified in the applicable CI
4、D document (see Table I) unless item is a manufacturers part number/cage code then, in which manufacturers current specifications apply. 3.2 Color. Individual item colors will be in accordance with applicable specifications. Comments, suggestions, or questions on this document should be addressed to
5、: Attn: DLA Troop Support, Standardization Team, 700 Robbins Avenue, Philadelphia, PA 19111-5096. Since contact information can change, you may want to verify the currency of this address information using Acquisition Streamlining and Standardization Information System (ASSIST) online database at ht
6、tps:/assist.dla.mil. Item Name CID Item Type Quantity Pick, Chock A-A-59853 - 3 Carabiner A-A-59836 X 1 METRIC Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59933 2 3.3 End item testing. Individual item test standards shall be in accordance wit
7、h their related International Climbing and Mountaineering Federation Standards, where applicable. 3.4 Materials. Individual item materials shall be in accordance with applicable specifications. 3.5 Workmanship. The AMK Chock Pick Replacement Kit shall conform to the quality of product established by
8、 this document. The occurrence of defects shall not exceed the contractors own quality assurance standards and the quality assurance standards defined in the technical data in the solicitation and/or contract. 3.6 Service life. The AMK Chock Pick Replacement Kit shall have no unexpected material or
9、component failures during a continuous one-year cycle. The AMK Chock Pick Replacement Kit shall have no unexpected material or component failures during periodic use over a five (5) year period. 3.7 Labels/barcoding/instruction slip. If applicable, all labeling, barcoding and instruction slip requir
10、ements shall be as specified in the solicitation or contract (see 7.2). 3.7.1 Labels. Each AMK Chock Pick Replacement Kit shall have identification label Class 5 conforming to Type VI of MIL-DTL-32075. The color of the label shall be white. The following information shall be included in the printing
11、 for the identification label: ARMY MOUNTAINEERING KIT (AMK) CHOCK PICK REPLACEMENT KIT NSN: XXX-XXX-XXX The following instruction information shall be supplied: a. The name or trademark of the manufacturer, importer or supplier b. The meaning of any marking on the product c. The use of the product
12、d. How to choose other components for use in the system e. How to maintain and service the product f. The lifespan of the product or how to access it g. The effects of chemical reagents and temperature on the product h. The effects of storing and aging i. Identification of the model, if more than on
13、e model is available 4. REGULATORY REQUIREMENTS. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR). 4.1 Recycled, recovered, or environmentally preferable materials. Recyc
14、led, recovered, or environmentally preferable materials should be used to the maximum extent possible, provided that the material meets or exceeds the operational and maintenance requirements and promotes economically advantageous life cycle costs. Provided by IHSNot for ResaleNo reproduction or net
15、working permitted without license from IHS-,-,-A-A-59933 3 5. PRODUCT CONFORMANCE PROVISIONS. 5.1 Product conformance. The products provided shall meet the salient characteristics of this Commercial Item Description, conform to the producers own drawings, specifications, standards, and quality assur
16、ance practices, and be the same product offered for sale in the commercial marketplace. The Government reserves the right to require proof of such conformance. 5.2 End item examination. Each kit shall be examined for the following defects as listed in Table II: TABLE II. End item examination Examine
17、 Defect Description Components Missing components Incorrect item, size, type or color 5.3 Acceptance criteria. Acceptance criteria shall be as specified in the contract or purchase order (see 7.2). 6. PACKAGING. 6.1 Preservation, packing and marking. The preservation, packing and marking shall be as
18、 specified in the contract or order (see 7.2) and as below. 7. NOTES. 7.1 Sources of Government documents. 7.1.1 Copies of Government documents are available online at https:/assist.dla.mil/quicksearch/ or from the Standardization Documents Order Desk, Building 4D, 700 Robbins Avenue, Philadelphia,
19、PA 19111-5094. 7.1.2 Federal Acquisition Regulations are available online at http:/acquisition.gov/far/index.html or by contacting the Superintendent of Documents at 202-512-1800. 7.2 Ordering data. The contract or order should specify the following: a. Title, number, and date of this Commercial Ite
20、m Description. b. When required, labeling, barcoding and instruction slip (see 3.7) c. Acceptance criteria (see 5.3) d. Packaging (see 6.1) 7.3 National Stock Numbers (NSNs). The following is a list of NSNs and Types associated for Type I through Type V, to determine the required items for the repla
21、cement kit that corresponds to A-A-59853, Pick, Chock, and A-A-59836, Carabiner, listed below: Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59933 4 NSNs TYPE ITEM 8465-01-582-5611 - Pick, Chock 8465-01-578-8906 X Carabiner 7.4 Key words. Climb
22、ing MILITARY INTERESTS: CIVIL AGENCY COORDINATING ACTIVITY: Custodians: GSA-FSS Army GL Navy -MC PREPARING ACTIVITY: DLA-CT Project Number: 8465-2013-002 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
