1、 REVISIONS LTR DESCRIPTION DATE APPROVED A Delete vendor CAGE number 17826. Delete vendor similar part numbers 671-XX and AT-061671-XX. Editorial changes throughout 16 Feb 88 D. MOORE B Changes in accordance with NOR 5905-R010-92 28 May 93 D. MOORE C Update and validation of drawing. update to prese
2、nt DoD policy requirements 24 Aug 00 K. COTTONGIM D Added Pure Tin Prohibition, Pulse Application, Electrostatic Charge and Manufacturer Eligibility paragraphs Editorial changes throughout 30 June 11 M. RADECKI Prepared in accordance with ASME Y14.100 Source control drawing REV STATUS OF PAGES REV D
3、 D D D D D D PAGES 1 2 3 4 5 6 7 PMIC N/A Original date of drawing 14 July 1987 PREPARED BY Allen R. Knox DEFENSE ELECTRONICS SUPPLY CENTER DAYTON, OH 45444-5000 CHECKED BY David E. Moore TITLE RESISTOR, NETWORK, 6 PIN, SINGLE-IN-LINE PACKAGE (SIP) APPROVED BY David E. Moore SIZE A CODE IDENT. NO. 1
4、4933 DWG NO. 87030 REV D PAGE 1 OF 7 AMSC N/A 5905-E615CURRENT DESIGN ACTIVITY CAGE CODE 037Z3 HAS CHANGED NAMES TO: DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE ELECTRONICS SUPPLY CENTER DAY
5、TON, OHIO SIZE A CODE IDENT NO. 14933 DWG NO. 87030 REV D PAGE 2 1. SCOPE 1.1 Scope. This drawing describes the requirements for a 6 pin, single-in-line package (SIP), resistor network. 1.2 Part or Identifying Number (PIN). The complete PIN is as follows: 87030 - 001 Drawing number Schematic 2. APPL
6、ICABLE DOCUMENTS 2.1 Government documents. 2.1.1 Specifications and standards. The following specifications, standards and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those listed in the cited in the solicitatio
7、n or contract (see 6.2). DEPARTMENT OF DEFENSE SPECIFICATION MIL-PRF-83401 - Resistors Networks, Fixed, Film, and Capacitor-Resistor Networks, Ceramic Capacitor and Fixed Film Resistors, General Specification For. DEPARTMENT OF DEFENSE STANDARDS MIL-STD-1285 - Marking of Electrical and Electronic Pa
8、rts. (Copies of these documents are available online at https:/assist.daps.dla.mil/quicksearch/ or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094). 2.2 Order of precedence. Unless otherwise noted herein or in the event of a conflict between
9、 the text of this document and the references cited herein (except for related specification sheets), the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained. 3. REQUIREMENTS 3.1 Item requ
10、irements. The individual item requirements shall be in accordance with MIL-PRF-83401 and as specified herein. 3.2 Interface and physical dimensions. The resistor shall meet the interface and physical dimensions as specified in MIL-PRF-83401 and herein (see figure 1). 3.3 Electrical characteristics.
11、3.3.1 Resistance. The resistance range shall be as specified on figure 2. 3.3.2 Resistance tolerance. The resistance tolerance shall be 1 percent. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE ELECTRONICS SUPPLY CENTER DAYTON, OHIO SIZE A C
12、ODE IDENT NO. 14933 DWG NO. 87030 REV D PAGE 3 Inches mm Inches mm Inches mm Inches mm .004 0.10 .010 0.25 .030 0.76 .100 2.54 .005 0.13 .012 0.30 .040 1.02 .135 3.43 .006 0.15 .015 0.38 .049 1.24 .187 4.75 .008 0.20 .017 0.43 .050 1.27 .583 14.81 .009 0.23 .019 0.48 .098 2.49 NOTES: 1. Dimensions a
13、re in inches. 2. Metric equivalents are given for general information only. 3. Unless otherwise specified, tolerances are .005 (0.13 mm). 4. The picturization of the styles above is given as representative of the envelope of the item. Slight deviations from the outline shown, which are contained wit
14、hin the envelope and do not alter the functional aspects of the device, are acceptable. 5. Terminal centerline to centerline measurements made at point of emergence of the lead from the body. 6. Measurement made at point of emergence of the lead from the body. 7. Pin 1 locator shall be a bevel, stri
15、pe, notch or a dot above pin number 1 in the shaded area. 8. If the standoffs are located on the body, a minimum of two standoffs are required as illustrated. As an option, additional standoffs maybe located on the body of the resistor network. If leads with standoffs are used, standoffs on the body
16、 are not required. FIGURE 1. Resistor network. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE ELECTRONICS SUPPLY CENTER DAYTON, OHIO SIZE A CODE IDENT NO. 14933 DWG NO. 87030 REV D PAGE 4 3.3.3 Resistor power rating. The resistor power ratin
17、g for individual resistors shall be 100 milliwatts. 3.3.4 Package power rating. The package power rating shall be 250 milliwatts. 3.3.5 Schematic. Resistor networks are available in schematics listed in figure 2. FIGURE 2. Schematics. 3.3.6 Voltage rating. Each resistor element shall have a maximum
18、voltage rating of 50 volts dc and ac rms. 3.3.7 Characteristic. The resistor networks shall be in accordance with MIL-PRF-83401, characteristic K. 3.3.8 Pure tin. The use of pure tin, as an underplate or final finish, is prohibited both internally and externally. Tin content of resistor components a
19、nd solder shall not exceed 97 percent, by mass. Tin shall be alloyed with a minimum of 3 percent lead, by mass (see 6.3). Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE ELECTRONICS SUPPLY CENTER DAYTON, OHIO SIZE A CODE IDENT NO. 14933 DWG N
20、O. 87030 REV D PAGE 5 3.4 Environmental characteristic. The environmental characteristics shall be in accordance with MIL-PRF-83401. 3.5 Marking. Marking shall be in accordance with MIL-STD-1285, except the PIN shall be as specified in 1.2, with the manufacturers CAGE number or trade mark and date c
21、ode. 3.6 Recycled, recovered, or environmentally preferable materials. Recycled, recovered, or environmentally preferable materials should be used to the maximum extent possible provided that the material meets or exceeds the operational and maintenance requirements, and promotes economically advant
22、ageous life cycle costs. 3.7 Manufacturer eligibility. To be eligible for listing as a approved source of supply, a manufacturer shall be listed on the MIL-PRF-83401 Qualified Products List for at least one part, or perform the group A and group B inspections specified herein on a sample of parts ag
23、reed upon by the manufacturer and DLA Land and Maritime - VAT. 3.7.1 Certificate of compliance. A certificate of compliance shall be required from manufacturers requesting to be listed as approved sources of supply. 3.8 Workmanship. Resistors shall be uniform in quality and free from any defects tha
24、t will affect life, serviceability, or appearance. 4. VERIFICATION 4.1 Product assurance program. The product assurance program specified in MIL-PRF-83401. 4.2 Qualification inspection. Qualification inspection is not applicable to this document. 4.3 Conformance inspections. 4.3.1 Inspection of prod
25、uct for delivery. Inspection of product for delivery shall consist of group A and group B inspections of MIL-PRF-83401. 4.3.2 Certification. The acquiring activity, at its discretion, may accept a certificate of compliance with group B requirements in lieu of performing group B tests (see 6.2d). 4.4
26、 Inspection of packaging. Inspection of packaging shall be in accordance with MIL-PRF-83401. 4.5 Visual and mechanical examination. Resistors shall be examined to verify that the materials, design, construction, physical dimensions, marking, and workmanship are in accordance with the applicable requ
27、irements of MIL-PRF-83401. 5. PACKAGING 5.1 Packaging. For acquisition purpose, the packaging requirements shall be as specified in the contract or order (see 6.2). When packaging of materiel is to be performed by DoD or in-house contractor personnel, these personnel need to contact the responsible
28、packaging activity to ascertain packaging requirements. Packaging requirements are maintained by the Inventory Control Points packaging activities within the Military Service or Defense Agency, or within the military services system commands. Packaging data retrieval is available from the managing M
29、ilitary Departments or Defense Agencys automated packaging files, CD-ROM products, or by contacting the responsible packaging activity. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE ELECTRONICS SUPPLY CENTER DAYTON, OHIO SIZE A CODE IDENT N
30、O. 14933 DWG NO. 87030 REV D PAGE 6 6. NOTES (This section contains information of a general or explanatory nature that may be helpful, but is not mandatory.) 6.1 Intended use. Resistor networks are used in surface mounting applications where space is a major concern. 6.2 Ordering data. The contract
31、 or purchase order should specify the following: a. Complete PIN (see 1.2). b. Requirements for delivery: One copy of the conformance inspection data or a certificate of compliance that parts have passed conformance inspection with each shipment of parts by the manufacturer. c. Packaging requirement
32、s (see 5.1). d. Whether the manufacturer performs the group B tests or provides certificate of compliance with group B (see 4.3.2). 6.3 Tin whisker growth. The use of alloys with tin content greater than 97 percent, by mass, may exhibit tin whisker growth problems after manufacture. Tin whiskers may
33、 occur anytime from a day to years after manufacture and can develop under typical operating conditions, on products that use such materials. Conformal coatings applied over top of a whisker-prone surface will not prevent the formation of tin whiskers. Alloys of 3 percent lead, by mass, have shown t
34、o inhibit the growth of tin whiskers. For additional information on this matter, refer to ASTM-B545 (Standard Specification for Electrodeposited Coatings of Tin). 6.4 Pulse applications. Designers are CAUTIONED on using the above resistors in high power pulse applications. Since they have not been q
35、ualified nor tested for such applications, damage and premature failure are possible 6.5 Electrostatic charge. Under several combinations of conditions, these resistors can be electrically damaged, by electrostatic charges, and drift from specified value. Users should consider this phenomena when or
36、dering or shipping resistors. Direct shipment to the Government is controlled by MIL-DTL-39032 that specifies a preventive packaging procedure. 6.6 Users of record. Coordination of this document for future revisions is coordinated only with the approved sources of supply and the users of record of t
37、his document. Requests to be added as a recorded user of this drawing may be achieved on-line at resistordla.mil or in writing to: DLA Land and Maritime ATTN: VAT, P.O. Box 3990, Columbus, OH 43218-3990 or by telephone (614) 692-8754 or DSN 850-8754. 6.7 Approved sources of supply. Approved sources
38、of supply are listed herein. Additional sources will be added as they become DLA Land and Maritime ATTN: VAT, P.O. Box 3990, Columbus, OH 43218-3990, or by telephone (614) 692-8754 or DSN 850-8754. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFE
39、NSE ELECTRONICS SUPPLY CENTER DAYTON, OHIO SIZE A CODE IDENT NO. 14933 DWG NO. 87030 REV D PAGE 7 DLA Land and Maritime drawing PIN Vendor similar designation or type number 1/ Vendor CAGE Vendors name and address 87030-* 4* 57027 IRC Inc. 4222 South Staple Street Corpus Christy, TX 78411 87030-* MS
40、P06A-*-* 91637 Vishay-Dale P.O. Box 609 1122 23rd Street Columbus, NE 68602-0609 1/ Parts must be purchased to the DLA Land and Maritime PIN to assure that all performance requirements and test are met. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
