1、REVISIONS LTR DESCRIPTION DATE APPROVED A Added MS21340 lock washer to jamnut. August 29, 2013 Abdo Abdouni Requirements of DSCC drawing 84148 are applicable. REV PAGE REV STATUS OF PAGES REV A A A PAGE 1 2 3 4 5 6 PMIC G PREPARED BY DEFENSE SUPPLY CENTER, COLUMBUS P.O. BOX 3990, COLUMBUS, OHIO 4321
2、8-3990 Ron Gary Original date of drawing 22 May 2006 CHECKED BY TITLE CONNECTOR, CONCENTRIC TWINAXIAL, RADIO FREQUENCY, (THREADED RECEPTACLE, SOCKET CONTACT) JAMNUT MOUNTED, SERIES DBA Mary McWilliams APPROVED BY Richard Taylor SIZE CAGE CODE DWG. NO. 04019 A 037Z3 REV A PAGE 1 OF 6 AMSC N/A 5935-E8
3、47-001 CURRENT DESIGN ACTIVITY CAGE CODE 037Z3 HAS CHANGED NAMES TO: DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE SUPPLY CENTER, COLUMBUS P.O. BOX 3990, COLUMBUS, OHIO 43218-3990 SIZE CAGE CO
4、DE DWG NO. A 037Z3 04019 REV A PAGE 2 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for information only. 3. All undimensioned pictorial configurations are for reference purposes only. 4. Wrench flats are to accommodate standard wrench openings in accordance with FED-STD-H28. 5
5、. Interface shall be in accordance with MIL-STD-348, series DBA, socket contact. FIGURE 1. General configuration. Inches mm Inches mm .020 0.50 .547 13.90 .022 0.56 .584 14.83 .087 2.21 .596 15.14 .090 2.29 .603 15.32 .096 2.44 1.500 38.1 .125 3.17 .187 4.75 .190 4.83 .4375 11.11 .439 11.15 .443 11.
6、25 .490 12.45 .510 12.95 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43218-3990 SIZE CAGE CODE DWG NO. A 037Z3 04019 REV PAGE 3 A MATERIALS: Connector body, hex nut, clamp nut and cone: Brass in accord
7、ance with ASTM B16/B16M, ASTM B36/B36M or ASTM B121/B121M. Nickel plated, 50 microinches (1.27 mm), minimum, in accordance with SAE-AMS-QQ-N-290, class 1 or Silver plated in accordance with MIL-PRF-49142. Center contact: Beryllium copper in accordance with ASTM B194, ASTM B196/B196M or ASTM B197/B19
8、7M. Gold plated a minimum thickness of 50 microinches (1.27 mm) in accordance with ASTM B488, type II, code C, class 1.27, over 50 microinches (1.27mm), minimum of nickel in accordance with SAE-AMS-QQ-N-290, class 1. Intermediate contact: Brass in accordance with ASTM B16/B16M, ASTM B36/B36M or ASTM
9、 B121/B121M. Gold plated a minimum thickness of 50 microinches (1.27 mm) in accordance with ASTM B488, type II, code C, class 1.27, over 50 microinches (1.27mm), minimum of nickel in accordance with SAE-AMS-QQ-N-290, class 1. Crimp sleeve: Brass in accordance with ASTM B16/B16M, ASTM B36/B36M or AST
10、M B121/B121M. Nickel plated 50 microinches (1.27 mm), minimum, in accordance with SAE-AMS-QQ-N-290, class 1. Insulators and dielectrics: PTFE in accordance with ASTM D1710, ASTM D4895, or FEP in accordance with ASTM D2116. Lock washer: MS21340 or equivalent. Phosphor bronze in accordance with CDA 42
11、5, C42500, ASTM B591 and ASTM D888 or equivalent. Sealing gasket: Silicone rubber in accordance with A-A-59588. ENGINEERING DATA: (Metric equivalents are in parentheses and given for information only) Nominal impedance: Non-constant. Frequency range: 0 to 500 MHz. Voltage rating: 400 V rms at sea le
12、vel, maximum. 100 V rms at 70,000 feet (4.437 kPa), maximum. Temperature rating: -65C to +200C. REQUIREMENTS: Requirements of drawing 84148 are applicable. Dimensions and configuration: See figures 1 and MIL-STD-348. Force to engage and disengage: Longitudinal force: 4 pounds (17.8 N), maximum. Torq
13、ue: 2.5 inch-pounds (0.28 Nm), maximum. Mating characteristics: All test pins steel, with 16 microinches (0.406 m) finish. Center contact (socket); Oversize test pin: .0190 +.0001 inch (0.48 +0.002 mm) diameter. Insertion depth: .030 - .045 inch (0.76 1.14 mm). Number of insertions - 1 Insertion for
14、ce test: Test pin diameter : .0185 +.0001 inch (0.47 +0.002 mm). Insertion depth: .050 - .075 inch (1.27 1.90 mm). Insertion force: 1 pound (4.44 N), maximum. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, O
15、H 43218-3990 SIZE CAGE CODE DWG NO. A 037Z3 04019 REV PAGE 4 A Withdrawal force test: Test pin diameter: .0170 -.0001 inch (0.13 -0.002 mm). Insertion depth: .100 - .125 inch (2.54 - 3.17 mm). Withdrawal force: 0.5 ounces (0.14 N), minimum. Coupling proof torque - Not applicable. Permeability of non
16、-magnetic materials: In accordance with ASTM A342/A342M. Hermetic seal: Not applicable. Leakage (pressurized connectors): Not applicable. Insulation resistance: In accordance with MIL-PRF-49142, 5,000 megohms. Points of measurement: 1. Between center conductor and intermediate conductor. 2. Between
17、intermediate conductor and outer conductor. Center contact retention: Axial force: 2 pounds (8.9 N), minimum. Moisture resistance: In accordance with MIL-PRF-49142. Contact resistance (in milliohms, maximum): Initial After environment Center contact: 6.0 8.0 Intermediate contact 3.0 5.0 Outer contac
18、t: 1.0 3.0 Dielectric withstanding voltage at sea level: In accordance with MIL-PRF-49142. At sea level, 750 V rms, measured between center and intermediate contact. 350 V rms, measured between intermediate contact and outer contact. Thermal shock: In accordance with MIL-PRF-49142. Except high tempe
19、rature shall be +200C when using +200C cables. Salt spray: In accordance with MIL-PRF-49142. Vibration: In accordance with MIL-PRF-49142. Shock (specified pulse): In accordance with MIL-PRF-49142. Corona: In accordance with MIL-PRF-49142. Altitude: 70,000 feet (4.437 kPa). Voltage: 125 V rms, minimu
20、m. RF high potential withstanding voltage: In accordance with MIL-PRF-49142. Test frequency: 5 to 7.5 MHz 500 V rms, between center contact and intermediate contact. 125 V rms, between intermediate contact and outer contact. Risetime degradation: 800 picoseconds, maximum. Provided by IHSNot for Resa
21、leNo reproduction or networking permitted without license from IHS-,-,-DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43218-3990 SIZE CAGE CODE DWG NO. A 037Z3 04019 REV PAGE 5 A Cable retention force: Cable outside diameter (mm) Retention force .120 to .215 (3.05 to 5.46 mm) 25 pounds (111.2 N), mini
22、mum (crimp) 40 pounds (178 N), minimum (non-crimp) Connector durability: 500 cycles minimum, at 12 cycles per minute maximum. Connectors must meet force to engage and disengage after cycling. Coupling mechanism retention force: Not applicable. Part or Identifying Number (PIN): See table I. TABLE I.
23、PIN to cable cross reference. DSCC PIN Cable accommodation 04019ZB*-1 (Crimp) 1/ M17/176-00002 M17/176-00003 A.F. 8712812 (to be inactivated) 04019ZB*-2 (Crimp) 2/ 04019ZB*-3 (Non-crimp) 3/ 1/ Crimp attached connectors shall be crimped using Kings Electronics crimp tool, KTH-1000, crimp die KTH-2168
24、, or equivalent. This is a single action full crimp design. 2/ Crimp attached connectors shall be crimped using standard military crimping tool M22520/5-01, crimp die CD5-9 and locator 010-0041 or equivalent approved by the preparing activity. 3/ No special tools required. (Standard soldering irons,
25、 wrenches etc to assemble). * Body plating option. Approved sources of supply are listed herein. Additional sources will be added as they become available. The vendors listed on the requirements drawing have agreed to this drawing and a certificate of compliance has been submitted to DLA Land and Ma
26、ritime-VAI. DSCC drawing PIN 1/ Vendor CAGE number Vendor reference PIN 04019ZBN-1 91836 2802-1-9 04019ZBS-1 04019ZBN-2 14949 BJ 3159 AC-201 04019ZBS-2 14949 BJ3159AC-201-1M 04019ZBN-3 14949 BJ 3159-47 04019ZBS-3 14949 BJ3159-47-1M 1/ Parts must be purchased to this DSCC PIN to assure that all perfo
27、rmance requirements and tests are met. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OH 43218-3990 SIZE CAGE CODE DWG NO. A 037Z3 04019 REV PAGE 6 A Vendor CAGE Vendor Name and Number address 14949 Trompeter Electronics 5550 E. McDowell Rd. Mesa, Arizona 85215 91836 Kings Electronics 1685 Overview Dr. Rock Hill, SC 29730 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
