1、MIL-C-29462 3 m 9999906 052366 - 4 _ m I INCH-POUND I MIL-C-294 62 15 April 1992 MILITARY SPECIFICATION CLOTH, LAMINATED, POLYESTER, TRICOT KNIT, ACTIVATED CARBON SPHERE, CHEMICAL PROTECTIVE This specification is approved for use by the US Marine Corps, Department of the Navy, and is available for u
2、se by all Departments and Agencies of the Department of Defense. 1. SCOPE 1.1 Scope. This specification covers the requirements for a chemical protective fabric with activated carbon spheres between a polyester tricot knit cloth and a coaxial polyamide/polyester nonwoven spacer liner cloth. 2. APPLI
3、CABLE DOCUMENTS 2.1 Government Documents. 2.1.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents shall be those listed in the issue o
4、f the Department of Defense Index of Specifications and Standards (DODISS) and supplement thereto, cited in the solicitation (see 6.2). Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Defense Pe
5、rsonnel Support Center, Clothing and Textiles Directorate, Attn: DPSC-FSSD, 2800 South 20th Street, Philadelphia, PA 19101-8419, by using the Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. AMSC-NA FSC 8305 DISTRIBUTION STATEMENT A. Ap
6、proved for public release; distribution is unlimited. e Licensed by Information Handling ServicesMIL-C-29462 83 W 9999906 0523bb9 b W SPECIFICATIONS FEDERAL PPP-P-1136 MILITARY MIL-C-43468 STANDARDS FEDERAL FED-STD-191 MILITARY MIL-STD-105 MIL-C-29462 Packaging and Packaging of Coated (Plastic; Rubb
7、er) and Laminated Fabrics Cloth, Camouflage Pattern, Wind Resistant Poplin, Cotton Textile Test Methods Sampling Procedures and Tables for Inspection by Attributes (Unless otherwise indicated, copies of federal and military specifications, standards and handbooks are available from the Standardizati
8、on Documents Order Desk, Bldg. 4D, 700 Robbins Avenue, Philadelphia, PA 19111-5094.) 2.1.2 Other Government documents, drawincrs, and publications. The following other Government documents, drawings, and publications form a part of this document to the extent specified herein. Unless otherwise speci
9、fied, the issues are those cited in the solicitation. TEST METHODS CRDC-SP-84010 Laboratory Methods for Evaluating Protective Clothing Systems Against Chemical Agents (Application for copies may be requested from the Commander, Chemical Research and Development Center, ATTN: DRSMC-CLJ-IR (A), Aberde
10、en Proving Ground, Maryland 21010.) 2.2 Non-Government Publications. The following document(s) form a part of this document to the extent specified herein. otherwise specified, the issues of the documents which are DOD adopted shall be those listed in the issue of the DODISS cited in the solicitatio
11、n. Unless otherwise specified, the issues of documents not listed in the DODISS are the issues of the documents cited in the solicitation (see 6.2). Unless 2 Licensed by Information Handling Services4 MIL-C-29462 PRINS MAURITS LABORATORY TNO Laboratory Evaluation of the Protection Afforded by NBC Cl
12、othing, Program 723.1, dated July 1987 Maurits Laboratory, Chemical and Technological Research Institute, P.O. Box 45, 2280 AA Rijswijk ZH, Lange Kleiweg 137, 2288 GJ Rijswijk ZH, Netherlands.) (Applications for copies may be requested from TNO Prins TECHNICAL MANUAL OF THE AMERICAN ASSOCIATION OF T
13、EXTILE CHEMISTS AND COLORISTS Method Number 135-1987 - Dimensional Changes in Automatic Home Laundering of Durable Press Woven or Knit Fabrics (Applications for copies of the AATCC Manual should be addressed to the AATCC National Headquarters, P.O. Box 12215, Research Triangle Park, North Carolina 2
14、7709.) ANNUAL BOOK OF ASTM STANDARDS: VOLUME 15.01-REFRACTORS; CARBON AND GRAPHITE PRODUCTS; ACTIVATED CARBON Designation - D 2854-83 - Apparent Density of Activated Carbon Designation - D 2862-82 - Particle Size Distribution of Granular Activated Carbon Designation - D 1810-81 - Determination of Io
15、dine Number of Activated Carbon (Applications for copies of the ASTM Annual Book of ASTM Standards: Volume 15.01 should be addressed to: ASTM, 1916 Race Street, Philadelphia, PA 19103-1187.) (Non-Government standards and other publications are normally available from the organizations that prepare o
16、r distribute the documents. These documents also may be available in or through libraries or other informational services.) 2.3 Order of precedence. In the event of a conflict between the text of this document and the references cited herein, the text of this document takes precedence. Nothing in th
17、is document however, supersedes applicable laws and regulations unless a specific exemption has been obtained. 3. REQUIREMENTS 3.1 Standard sample. better than the standard sample with respect to all characteristics for which the standard sample is referenced (see 6.4) The laminated fabric shall be
18、equal to or 0 3 Licensed by Information Handling ServicesMIL-C-294b2 83 W 999990b 0523673 4 W MIL-C-29462 a 3.2 First article. When specified, (see 6.2), a sample shall be subjected to first article inspection, in accordance with 4.3. 3.3 Material. 3.3.1 Inner Lininq. The inner lining cloth shall be
19、 made using 45 denier polyester filament yarn and knit on a 2 bar 28 gauge tricot machine. The cloth shall be a suitable shade of black and shall show fastness to water equal to or better than the standard sample. The wales shall be 11 cm. and courses shall be 25 cm. giving a 87-95 g/m2 fabric. The
20、fabric must be thoroughly heat- set to stabilize wales and courses. The fabric must be free from any chemicals causing skin irritation when wearing the NBC suit. 3.3.2 SDacer linina cloth. The spacer lining acts as an additional layer to protect against the CW agents. The spacer lining is a nonwoven
21、 made from a coaxial polyamide/polyester fiber weighing 34 g/m2. 3.3.3 Activated carbon. The activated carbon spheres shall meet the physical and chemical requirements as specified in Table I when tested as specified in 4.5.1. TABLE I. Activated Carbon Reauirements Characteristics Requirements Spher
22、ical Size Diameter range (mm) Mean diameter (nun) Density (minimum) Active Surface, iodine number (minimum) Before detergent exposure After detergent exposure O. 25-0.71 ackaqinq examination. An AQL, expressed in terms of defects per hundred units, of 2.5 is recommended. 6.6 Recycled materials. It is encouraged that recycled materials be used when practical as long as the materials meet the requirements of this specification. 6.7 Subject term key word) listinq. Fabric Protective Custodian: Navy - MC 15 Preparing activity: DLA-CT Project No. 8305-0434 Licensed by Information Handling Services
