1、 AMSC N/A FSC 6145 INCH-POUND MIL-DTL-27072/24C 12 March 2012 SUPERSEDING MIL-DTL-27072/24B8 December 2000 DETAIL SPECIFICATION SHEET CABLE, SPECIAL PURPOSE, ELECTRICAL, MULTICONDUCTOR (3 CONDUCTORS) AND SINGLE SHIELDED, M27072/24FBCA* This specification is approved for use by all Departments and Ag
2、encies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-27072. REQUIREMENTS: NOTE: The complete Part or Identifying Number (PIN) requires a color code designator (see table I). FIGURE 1. Cable configuratio
3、n. WHITE W/YELLOW TR. WHITE W/RED TR. WHITE W/BLUE TR. FILLER SHIELD TINNED COPPER SHEATH POLYVINYL CHLORIDE Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-27072/24C 2 Design and construction: See figure 1 Number of conductors: 3 Temperature
4、 rating: 105 C Components: Basic wire: M16878/18BJE* (see table I) Conductor: Tinned copper Primary insulation: Polyvinyl chloride Colors: White with blue tracer White with red tracer White with yellow tracer Jacket over insulation: Polyamide Color: Natural Filler: Material: In accordance with MIL-D
5、TL-27072 Lay: 1.6 inches Cabling: Not applicable Binder tape material: Not applicable Shield: Material: Tinned copper Gauge: 36 AWG Braid angle: 20 to 40 degrees Jacket undershield: Not applicable Sheath: Material: Polyvinyl chloride Wall thickness: .030 inch nominal Tensile strength: In accordance
6、with MIL-DTL-27072 Ultimate elongation: In accordance with MIL-DTL-27072 Accelerated aging: In accordance with MIL-DTL-27072 Color: See MIL-DTL-27072 Finished cable: See table I Cold bend: Mandrel size in accordance with MIL-DTL-27072 Dielectric withstanding voltage: 2,000 V rms Conductor resistance
7、 In accordance with basic wire specification TABLE I. Construction data. PIN 27072/24 Basic wire except color M16878/18BJE*1/,2/(reference) Finished cable diameter inch (mm) 10% Wire size (AWG) Number of strands Strand size Nominal diameter inch (mm) FBCA* 16 19 29 .100(2.54) .260(6.60) 1/ Asterisk
8、s (*) shall be replaced by the appropriate color designator. 2/ Dimensions are in inches. Metric equivalents are given for information only. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-27072/24C 3 Changes from previous issue: Marginal not
9、ations are not used in this revision to identify changes with respect to the previous issues due to the extensiveness of the changes. Referenced document. This document references MIL-DTL-27072. CONCLUDING MATERIAL Custodians: Preparing activity: Army - CR DLA - CC Navy - SH Air Force - 85 (Project
10、6145-2012-019) DLA CC NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of this information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
