1、AMSC N/A FSC 6145 INCH-POUND MIL-DTL-27072/83C 12 March 2012 SUPERSEDING MIL-DTL-27072/83B8 December 2000 DETAIL SPECIFICATION SHEET CABLE, SPECIAL PURPOSE, ELECTRICAL, MULTICONDUCTOR (7 CONDUCTORS) AND SINGLE SHIELDED, M27072/83MACA* This specification is approved for use by all Departments and Age
2、ncies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-27072. REQUIREMENTS: TAPESHEATH POLYVINYL CHLORIDE SHIELD TINNED COPPERWHITE/BROWNWHITE/BLUEWHITE/VIOLETWHITE/REDWHITE/BLACKWHITE/ORANGEWHITE/GREENNOT
3、E: The complete Part or Identifying Number (PIN) requires a color code designator (see table I). FIGURE 1. Cable configuration. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-27072/83C 2 Design and construction: See figure 1. Number of condu
4、ctors: 7 Temperature rating: 105 C Components: Basic wire: M16878/17BFB* (see table I) Conductor: Tinned copper Primary insulation: Polyvinyl chloride Colors: White with blue tracer White with brown tracer White with green tracer White with orange tracer White with red tracer White with violet trace
5、r White with black Jacket over insulation: Polyamide Color: Natural Filler: Not applicable Cabling: Not applicable Binder tape material: In accordance with MIL-DTL-27072 Shield: Material: Tinned copper Gauge: 36 AWG Braid angle: Braid 20 to 40 degrees Jacket undershield: Not applicable Sheath: Mater
6、ial: Polyvinyl chloride Wall thickness: .025 inch nominal Tensile strength: In accordance with MIL-DTL-27072 Ultimate elongation: In accordance with MIL-DTL-27072 Accelerated aging: In accordance with MIL-DTL-27072 Color: See MIL-DTL-27072 Finished cable: See table I Cold bend: Mandrel size in accor
7、dance with MIL-DTL-27072 Dielectric withstanding voltage: 2,000 V rms Conductor resistance: In accordance with basic wire specification TABLE I. Construction data. PIN 27072/83 Basic wire except color M16878/17BFB*1/,2/(reference) Finished cable diameter inch(mm) 10% Wire size (AWG) Number of strand
8、s Strand size Nominal diameter inch(mm) MACA* 22 7 30 .056(1.42) .247(6.27) 1/ Asterisks (*) shall be replaced by the appropriate color designator. 2/ Dimensions are in inches. Metric equivalents are given for information only. Provided by IHSNot for ResaleNo reproduction or networking permitted wit
9、hout license from IHS-,-,-MIL-DTL-27072/83C 3 Changes from previous issue: Marginal notations are not used in this revision to identify changes with respect to the previous issues due to the extensiveness of the changes. Referenced document. This document references MIL-DTL-27072. CONCLUDING MATERIA
10、L Custodians: Preparing activity: Army - CR DLA - CC Navy - SH Air Force - 85 (Project 6145-2012-014) DLA CC NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of this information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
