1、AMSC N/A FSC 6150 INCH-POUND MIL-DTL-52286/7B 18 May 2010 SUPERSEDING MIL-C-52286/7A 4 August 1972 DETAIL SPECIFICATION SHEET CABLE ASSEMBLY, POWER, ELECTRICAL Inactive for new design after 9 December 2003. This specification is approved for use by all Departments and Agencies of the Department of D
2、efense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-52286, “Cable Assemblies, Power, Electrical (with Molded on Terminations)“. FIGURE 1. Cable assembly, power, electrical, crimp terminals.Provided by IHSNot for ResaleNo reproduct
3、ion or networking permitted without license from IHS-,-,-MIL-DTL-52286/7B 2 REQUIREMENTS: Dimensions and configurations shall be in accordance with figure 1 and the MIL-DTL-52286 figure as specified. Connector A shall be in accordance with figure 14 of MIL-DTL-52286. Cable B shall consist of CO-01 M
4、LF (1/8) 0410. Minimum bond between connectors and cables: 300 pounds. CHANGES FROM PREVIOUS ISSUE. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Custodians: Preparing Activity: Army - CR4 DLA - GS DLA - GS8
5、Project 6150-2010-007) Review Activity: Army - AT NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST database at https:/assist.daps.dla.mil/. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
