1、 METRICMIL-DTL-83538/10B 2 June 2008 SUPERSEDING MIL-DTL-83538/10A 24 December 1998 DETAIL SPECIFICATION SHEET CONNECTORS AND ACCESSORIES, ELECTRICAL, CIRCULAR, UMBILICAL, BUSHING, CABLE, LAUNCHER RECEPTACLE FOR MIL-STD-1760 APPLICATIONS (METRIC) This specification is approved for use by all Departm
2、ents and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-83538. FIGURE 1. Cable bushing launcher receptacle. AMSC N/A FSC 5935 Provided by IHSNot for ResaleNo reproduction or networking permitted
3、 without license from IHS-,-,-MIL-DTL-83538/10B 2 mm Inches mm Inches mm Inches 0.64 0.025 3.18 0.125 25.4 1.000 0.89 0.035 3.68 0.145 38.10 1.500 0.100 0.004 4.95 0.195 1.58 0.062 5.21 0.205 NOTES: 1. Dimensions are in millimeters. 2. Inch equivalents are given for information only. FIGURE 1. Cable
4、 bushing launcher receptacle Continued. REQUIREMENTS: Dimensions and configurations: See figure 1. This cable bushing is used with MIL-DTL-83538/4. Part or Identifying Number (PIN) example: M83538/10-1. Material: Corrosion resistant, high performance resins, with or without filler materials, capable
5、 of withstanding 175C minimum. The resins must be defined by specifications listed in the DODISS or published by professional materials associations. Exceptions may be granted by the qualifying activity. QUALIFICATION: This cable bushing shall be in accordance with MIL-DTL-83538. The following detai
6、ls and exceptions shall apply: Group A: Visual and mechanical examination (100% inspection). Group B: Not applicable. Qualification and group C: Two test samples shall be required for stand alone qualification. However, if the manufacturer is in the process of qualifying MIL-DTL-83538/4 connectors,
7、then one test sample is required: Visual and mechanical examination Salt spray. Manufacturers that are qualifying this bushing as a stand alone accessory shall conduct salt spray in accordance with MIL-DTL-83538. Manufacturers that are in the process of qualifying MIL-DTL-83538/4 receptacles concurr
8、ently with MIL-DTL-83538/10 cable bushings are not required to perform this test, since it is part of the qualification process for MIL-DTL-83538/4. Separate testing is not required for group C, since the bushing is included in the testing process for MIL-DTL-83538/4. Post test examination. Provided
9、 by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-83538/10B 3 Changes from the previous issue: Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Referenced document
10、s. In addition to MIL-DTL-83538, this document references the following: MIL-DTL-83538/4 MIL-STD-1760 CONCLUDING MATERIAL Custodians: Preparing activity: Army CR DLA CC Navy AS Air Force 85 DLA CC Review activities: Army AR, MI (Project 59352007-049) Navy EC, MC, OS Air Force 19, 99 NOTE: The activi
11、ties listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change. You should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
