1、 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, (CIRCULAR, ENVIRONMENT RESISTING), PLUG, (BAYONET COUPLING, CRIMP SOCKET CONTACT), (SERIES III, CLASSES A, G, K, M, R, T, W AND Z) This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements
2、 for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-83723. FIGURE 1. Dimensions and configurations. AMSC N/A FSC 5935 INCH-POUND MIL-DTL-83723/75E w/AMENDMENT 1 20 April 2011 SUPERSEDING MIL-DTL-83723/75E 19 August 2009 Provided by IHSNot for ResaleNo re
3、production or networking permitted without license from IHS-,-,-MIL-DTL-83723/75E w/AMENDMENT 1 2 Shell size A dia max ins G dia min H dia J dia L dia min U dia max V 8 .312 .352 .415 .424 .540 .545 .632 .776 .025 10 .388 .428 .517 .526 .662 .667 .760 .906 .031 12 .558 .598 .687 .696 .832 .837 .930
4、1.078 .031 14 .627 .667 .756 .765 .901 .906 .999 1.141 .031 16 .772 .794 .883 .892 1.028 1.033 1.126 1.266 .031 18 .860 .900 .989 .998 1.134 1.139 1.232 1.375 .031 20 .985 1.025 1.114 1.123 1.261 1.266 1.357 1.510 .031 22 1.110 1.150 1.239 1.248 1.384 1.389 1.482 1.625 .031 24 1.235 1.275 1.364 1.37
5、3 1.511 1.516 1.607 1.760 .031 FIGURE 1. Dimensions and configurations - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-83723/75E w/AMENDMENT 1 3 Inches mm Inches mm Inches mm Inches mm Inches mm .015 0.38 .185 4.70 .627 15.93 .90
6、6 23.01 1.239 31.47 .025 0.64 .200 5.08 .632 16.05 .930 23.62 1.248 31.70 .031 0.79 .206 5.23 .662 16.81 .985 25.02 1.261 32.03 .035 0.89 .210 5.33 .667 16.94 .989 25.12 1.266 32.16 .051 1.30 .312 7.92 .678 17.22 .998 25.35 1.275 32.39 .054 1.37 .320 8.13 .687 17.45 1.025 26.04 1.364 34.65 .076 1.93
7、 .352 8.94 .696 17.68 1.028 26.11 1.373 34.87 .092 2.34 .366 9.30 .756 19.20 1.033 26.24 1.375 34.93 .093 2.36 .383 9.73 .760 19.30 1.078 27.38 1.384 35.15 .096 2.44 .388 9.86 .765 19.43 1.110 28.19 1.389 35.28 .105 2.67 .415 10.54 .772 19.61 1.114 28.30 1.482 37.64 .107 2.72 .424 10.77 .776 19.71 1
8、.123 28.52 1.510 38.35 .114 2.90 .428 10.87 .794 20.17 1.126 28.60 1.511 38.38 .118 3.00 .517 13.13 .832 21.13 1.134 28.80 1.516 38.51 .125 3.18 .526 13.36 .837 21.26 1.139 28.93 1.607 40.82 .146 3.71 .540 13.76 .860 21.84 1.141 28.98 1.625 41.28 .150 3.81 .545 13.84 .883 22.43 1.150 29.21 1.760 44.
9、70 .170 4.32 .552 14.02 .892 22.66 1.230 31.24 .177 4.50 .558 14.17 .900 22.86 1.232 31.29 .182 4.62 .598 15.19 .901 22.89 1.235 31.37 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for information only. 3. Unless otherwise specified, tolerances are .005 inches (0.13 mm) for thr
10、ee place decimals, .01 inches (0.25 mm) for two place decimals and 1ofor all angles. 4. Rear accessory interchangeability dimensions shall be in accordance with MIL-DTL-83723. 5. See table I for contact cavities requiring this dimension. FIGURE 1. Dimensions and configurations - Continued. Provided
11、by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-83723/75E w/AMENDMENT 1 4 REQUIREMENTS: Dimensions and configurations: See figure 1. For insert arrangements, see MIL-STD-1554 and table I. TABLE I. Inserts requiring reduced diameters for lead-in chamfe
12、rs on contact cavities. Shell size Insert Arrangements Contact cavities 8 03 1, 2, 3 10 06 1, 2, 3, 4, 5, 6 For connector accessories: See SAE-AS85049. This connector mates with MIL-DTL-83723/72, /74, /80, /81, /93 and /94. Part or Identifying Number (PIN) example: M83723/ 75 W 22 55 N Military desi
13、gnator Specification sheet number Class Shell size Insert arrangement Polarizing position Amendment Notations. The margins of this specification are marked with vertical lines to indicate modifications generated by this amendment. This was done as a convenience only and the Government assumes no lia
14、bility whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations. Referenced documents. In addition to MIL-DTL-83723, this document references the followin
15、g: MIL-DTL-83723/72 MIL-DTL-83723/74 MIL-DTL-83723/80 MIL-DTL-83723/81 MIL-DTL-83723/93 MIL-DTL-83723/94 MIL-STD-1554 SAE-AS85049 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-83723/75E w/AMENDMENT 1 5 CONCLUDING MATERIAL Custodians: Prepar
16、ing activity: Army - CR DLA - CC Navy - AS Air Force - 85 (Project 5935-2011-017) DLA - CC Review activities: Army - AR, MI Navy - EC Air Force 19, 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
