1、INCH-POUND MIL-1-45932 AMENDMENT 2 17 OCTOBER 1997 MILITARY SPECIFICATION INSERT, SCREW THBEAD - THIN WAU, LOCK IN This amendment forms a part of MIL-1-45932, dated 21 APRIL 1971, and is approved for use by all Departments and Agencies of the Department of Defense. PAGE 1 Change FSC from 5340 to 532
2、5. PAGE 18 Delete in its entirety and replace with the attached page 18. custodians : Army - AR Navy - AS Air Force - 99 Preparing Activity: DIA-IS (Project 5325-0395-01) Review activity: Army - AT, AV, CR4, MI Navy - MC, OS, YD1 Air Force - 82 NSA - NS AMSC N/A FSC 5325 DISTRIBUTION STATEMENT A. Ap
3、proved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MILI-45932 l I I r Notes : 1. Dimensions: T - Nominal thread diameter of applicable insert external thread. D-xT. (Optional 2 x T may be used) . (a)
4、 L - Length of applicable insert plus .O20 for rotational resistance tests (see 3.9.3) (b) L - Length of applicable insert plus .O63 for internal locking and breakaway toque tests (3.7.6) (b) L - Length of applicable insert plus .O63 for axial and pullout tests (3.9.1), (3.9.2). 2. Material : * (a)
5、Aluminum alloy, 2024-T4 per QQ-A-225/6 (bar) (UNS A92024). * (b) Aluminum alloy, 2024-T4 per 04-A-225/6 (bars and rods) (UNS A92024). * (c) Aluminum alloy 5083-H321 per QQ-A-250/6 (UNS A95083). For pullout test (3.9.2 ) Optional material: 6061-R6 per AMs4117 or QQ-A-225/8 or 6061-T651 per M4128 or -225/8. FIGURE 2. Toque and axial load test blocks. 18 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
