1、AMSC N/A FSC 5910 INCH-POUND MIL-PRF-83421/2D 27 February 2012 SUPERSEDING MIL-PRF-83421/2C 24 January 2006 PERFORMANCE SPECIFICATION SHEET CAPACITORS, FIXED, METALLIZED PLASTIC FILM DIELECTRIC, (DC, AC, OR DC AND AC), HERMETICALLY SEALED IN METAL CASES, ESTABLISHED RELIABILITY STYLES CRH11, CRH12,
2、AND CRH13 (INSULATED) This specification sheet is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-PRF-83421. NOTES: 1. Number 18 AWG wire .040 inch .002 (1.02
3、0.05 mm). 2. Dimensions are in inches. 3. Metric equivalents are in parentheses and are given for general information only. 4. See table I for additional dimensions. 5. Insulating sleeve shall extend beyond the capacitor body. Insulating sleeve thickness shall not exceed .005 inch (0.13 mm). 6. Plas
4、tic insulating sleeve shall be transparent; marking shall be applied to the capacitor case. FIGURE 1. Capacitor configuration. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TABLE I. Electrical characteristics, dimensions, and dash numbers. Capacita
5、nce value (nom) (in f) Dimensions 1/ (in inches with mm in parentheses) Dash numbers 2/ ESR 20 kHz 100 kHz (ohms maximum) AC rating maximum 400 Hz (volts rms) Ripple current 20 kHz to 100 kHz (amperes rms) maximum case temperature C 3/ L +.030 (0.76) -.090 (2.29) D +.020 (0.51) -.010 (0.25) G, max C
6、apacitance tolerance value (in %) 0.25 0.5 1.0 2.0 5.0 10.0 +25 +85 +105 CRH11 - 100 volts (dc rating) 0.47 .875 (22.23) .400 (10.16) 1.075 (27.31) 1001- 1002- 1003- 1004- 1005- 1006- 0.025 60 5.3 2.6 0.8 0.56 .875 (22.23) .500 (12.70) 1.075 (27.31) 1007- 1008- 1009- 1010- 1011- 1012- 0.024 60 6.0 3
7、.0 1.0 0.68 .875 (22.23) .500 (12.70) 1.075 (27.31) 1013- 1014- 1015- 1016- 1017- 1018- 0.023 60 6.2 3.1 1.0 0.82 .875 (22.23) .500 (12.70) 1.075 (27.31) 1019- 1020- 1021- 1022- 1023- 1024- 0.022 60 6.3 3.2 1.0 1.0 .906 (23.01) .562 (14.27) 1.106 (28.09) 1025- 1026- 1027- 1028- 1029- 1030- 0.017 60
8、7.7 3.9 1.2 2.0 1.094 (27.80) .670 (17.02) 1.294 (32.87) 1031- 1032- 1033- 1034- 1035- 1036- 0.014 60 10.3 5.2 1.6 3.0 1.094 (27.80) .750 (19.05) 1.294 (32.87) 1037- 1038- 1039- 1040- 1041- 1042- 0.013 60 11.4 5.7 1.8 5.0 1.406 (35.70) .750 (19.05) 1.606 (40.79) 1043- 1044- 1045- 1046- 1047- 1048- 0
9、.012 60 13.6 6.8 2.1 10.0 1.687 (42.85) 1.000 (25.40) 1.887 (47.93) 1049- 1050- 1051- 1052- 1053- 1054- 0.010 60 15.0 9.1 2.9 20.0 2.437 (61.90) 1.000 (25.40) 2.637 (66.98) 1055- 1056- 1057- 1058- 1059- 1060- 0.009 60 15.0 11.5 3.6 25.0 2.437 (61.90) 1.000 (25.40) 2.637 (66.98) 1061- 1062- 1063- 106
10、4- 1065- 1066- 0.008 60 15.0 11.7 3.7 CRH12 - 200 volts (dc rating) 0.18 .875 (22.23) .400 (10.16) 1.075 (27.31) 2001- 2002- 2003- 2004- 2005- 2006- 0.031 120 4.8 2.4 0.8 0.22 .875 (22.23) .500 (4.32) 1.075 (27.31) 2007- 2008- 2009- 2010- 2011- 2012- 0.030 120 5.4 2.7 0.9 0.27 .875 (22.23) .500 (4.3
11、2) 1.075 (27.31) 2013- 2014- 2015- 2016- 2017- 2018- 0.029 120 5.5 2.8 0.9 0.33 .875 (22.23) .500 (4.32) 1.075 (27.31) 2019- 2020- 2021- 2022- 2023- 2024- 0.028 120 5.6 2.8 0.9 0.39 .906 (23.01) .562 (14.27) 1.106 (28.09) 2025- 2026- 2027- 2028- 2029- 2030- 0.026 120 6.2 3.1 1.0 0.47 1.094 (27.80) .
12、562 (14.27) 1.294 (32.87) 2031- 2032- 2033- 2034- 2035- 2036- 0.025 120 7.0 3.5 1.1 0.56 1.094 (27.80) .562 (14.27) 1.294 (32.87) 2037- 2038- 2039- 2040- 2041- 2042- 0.024 120 7.2 3.6 1.1 0.68 1.094 (27.80) .670 (17.02) 1.294 (32.87) 2043- 2044- 2045- 2046- 2047- 2048- 0.023 120 8.0 4.0 1.3 0.82 1.0
13、94 (27.80) .670 (17.02) 1.294 (32.87) 2049- 2050- 2051- 2052- 2053- 2054- 0.022 120 8.2 4.1 1.3 1.0 1.094 (27.80) .670 (17.02) 1.294 (32.87) 2055- 2056- 2057- 2058- 2059- 2060- 0.021 120 8.4 4.2 1.3 2.0 1.406 (35.70) .750 (19.05) 1.606 (40.79) 2061- 2062- 2063- 2064- 2065- 2066- 0.017 120 11.1 5.5 1
14、.8 3.0 1.437 (36.50) 1.000 (25.40) 1.637 (41.58) 2067- 2068- 2069- 2070- 2071- 2072- 0.015 120 13.9 7.0 2.2 5.0 1.687 (42.85) 1.000 (25.40) 1.887 (47.93) 2073- 2074- 2075- 2076- 2077- 2078- 0.013 120 15.0 8.2 2.6 CRH13 - 400 volts (dc rating) 4/ 0.001 .562 (14.27) .235 (5.97) .762 (19.35) 3103 3104
15、3105 3106 3107 3108 1.00 240 0.49 0.25 0.08 0.0012 .562 (14.27) .235 (5.97) .762 (19.35) 3109 3110 3111 3112 3113 3114 0.95 240 0.50 0.25 0.08 0.0015 .562 (14.27) .235 (5.97) .762 (19.35) 3115 3116 3117 3118 3119 3120 0.90 240 0.52 0.26 0.08 0.0018 .562 (14.27) .235 (5.97) .762 (19.35) 3121 3122 312
16、3 3124 3125 3126 0.85 240 0.53 0.27 0.08 0.002 .562 (14.27) .235 (5.97) .762 (19.35) 3127 3128 3129 3130 3131 3132 0.75 240 0.57 0.28 0.09 0.0022 .562 (14.27) .235 (5.97) .762 (19.35) 3133 3134 3135 3136 3137 3138 0.70 240 0.59 0.29 0.09 0.0027 .562 (14.27) .235 (5.97) .762 (19.35) 3139 3140 3141 31
17、42 3143 3144 0.65 240 0.61 0.30 0.10 0.0033 .562 (14.27) .235 (5.97) .762 (19.35) 3145 3146 3147 3148 3149 3150 0.60 240 0.63 0.32 0.10 0.0039 .562 (14.27) .235 (5.97) .762 (19.35) 3151 3152 3153 3154 3155 3156 0.55 240 0.66 0.33 0.10 0.0047 .562 (14.27) .235 (5.97) .762 (19.35) 3157 3158 3159 3160
18、3161 3162 0.50 240 0.69 0.35 0.11 See footnotes at end of table. MIL-PRF-83421/2D2Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TABLE I. Electrical characteristics, dimensions, and dash numbers - Continued. Capacitance value (nom) (in f) Dimensions
19、 1/ (in inches with mm in parentheses) Dash numbers 2/ ESR 20 kHz 100 kHz (ohms maximum) AC rating maximum 400 Hz (volts rms) Ripple current 20 kHz to 100 kHz (amperes rms) maximum case temperature C 3/ L +.030 (0.76) -.090 (2.29) D +.020 (0.51) -.010 (0.25) G, max Capacitance tolerance value (in %)
20、 0.25 0.5 1.0 2.0 5.0 10.0 +25 +85 +105 CRH13 - 400 volts (dc rating) 4/ 0.0056 .687 (17.45) .235 (5.97) .887 (22.53) 3163 3164 3165 3166 3167 3168 0.45 240 0.80 0.40 0.13 0.0068 .687 (17.45) .235 (5.97) .887 (22.53) 3169 3170 3171 3172 3173 3174 0.35 240 0.90 0.45 0.14 0.0082 .687 (17.45) .235 (5.9
21、7) .887 (22.53) 3175 3176 3177 3178 3179 3180 0.30 240 0.97 0.49 0.15 0.01 .687 (17.45) .235 (5.97) .887 (22.53) 3181 3182 3183 3184 3185 3186 0.26 240 1.05 0.52 0.17 0.012 .687 (17.45) .235 (5.97) .887 (22.53) 3187 3188 3189 3190 3191 3192- 0.20 240 1.19 0.60 0.19 0.15 .813 (20.65) .312 (7.92) 1.01
22、3 (25.73) 3193 3194 3195 3196 3197 3198 0.12 240 1.95 0.97 0.31 0.018 .813 (20.65) .312 (7.92) 1.013 (25.73) 3199 3200 3201 3202 3203 3204 0.11 240 2.04 1.02 0.32 0.02 .813 (20.65) .312 (7.92) 1.013 (25.73) 3205 3206 3207 3208 3209 3210 0.10 240 2.14 1.07 0.34 0.022 .813 (20.65) .312 (7.92) 1.013 (2
23、5.73) 3211 3212 3213 3214 3215 3216 0.09 240 2.25 1.13 0.36 0.027 .813 (20.65) .312 (7.92) 1.013 (25.73) 3217 3218 3219 3220 3221 3222 0.09 240 2.32 1.16 0.37 0.033 .875 (22.23) .400 (10.16) 1.075 (27.31) 3223- 3224- 3225- 3226- 3227- 3228- 0.08 240 2.85 1.42 0.45 0.039 .875 (22.23) .400 (10.16) 1.0
24、75 (27.31) 3229- 3230- 3231- 3232- 3233- 3234- 0.07 240 3.04 1.52 0.48 0.047 .875 (22.23) .400 (10.16) 1.075 (27.31) 3235- 3236- 3237- 3238- 3239- 3240- 0.06 240 3.29 1.64 0.52 0.056 .875 (22.23) .400 (10.16) 1.075 (27.31) 3001- 3002- 3003- 3004- 3005- 3006- 0.058 240 3.5 1.7 0.6 0.068 .875 (22.23)
25、.500 (12.70) 1.075 (27.31) 3007- 3008- 3009- 3010- 3011- 3012- 0.046 240 4.4 2.2 0.7 0.082 .875 (22.23) .500 (12.70) 1.075 (27.31) 3013- 3014- 3015- 3016- 3017- 3018- 0.039 240 4.7 2.4 0.7 0.10 .875 (22.23) .500 (12.70) 1.075 (27.31) 3019- 3020- 3021- 3022- 3023- 3024- 0.035 240 5.0 2.5 0.8 0.12 .90
26、6 (23.01) .562 (14.27) 1.106 (28.09) 3025- 3026- 3027- 3028- 3029- 3030- 0.033 240 5.5 2.8 0.9 0.15 .906 (23.01) .670 (17.02) 1.106 (28.09) 3031- 3032- 3033- 3034- 3035- 3036- 0.032 240 6.2 3.1 1.0 0.18 .906 (23.01) .670 (17.02) 1.106 (28.09) 3037- 3038- 3039- 3040- 3041- 3042- 0.031 240 6.3 3.1 1.0
27、 0.22 1.094 (27.80) .670 (17.02) 1.294 (32.87) 3043- 3044- 3045- 3046- 3047- 3048- 0.030 240 7.0 3.5 1.1 0.27 1.094 (27.80) .670 (17.02) 1.294 (32.87) 3049- 3050- 3051- 3052- 3053- 3054- 0.029 240 7.2 3.6 1.1 0.33 1.094 (27.80) .670 (17.02) 1.294 (32.87) 3055- 3056- 3057- 3058- 3059- 3060- 0.028 240
28、 7.3 3.7 1.2 0.39 1.094 (27.80) .750 (19.05) 1.294 (32.87) 3061- 3062- 3063- 3064- 3065- 3066- 0.026 240 7.9 3.9 1.2 0.47 1.094 (27.80) .750 (19.05) 1.294 (32.87) 3067- 3068- 3069- 3070- 3071- 3072- 0.025 240 8.1 4.0 1.3 0.56 1.406 (35.70) .750 (19.05) 1.606 (40.79) 3073- 3074- 3075- 3076- 3077- 307
29、8- 0.025 240 9.2 4.6 1.4 0.68 1.406 (35.70) .750 (19.05) 1.606 (40.79) 3079- 3080- 3081- 3082- 3083- 3084- 0.024 240 9.4 4.7 1.5 0.82 1.656 (42.06) .750 (19.05) 1.856 (47.14) 3085- 3086- 3087- 3088- 3089- 3090- 0.023 240 10.4 5.2 1.6 1.0 1.656 (42.06) .750 (19.05) 1.856 (47.14) 3091- 3092- 3093- 309
30、4- 3095- 3096- 0.022 240 10.7 5.3 1.7 2.0 1.938 (49.23) 1.000 (25.40) 2.138 (54.31) 3097- 3098 3099- 3100- 3101- 3102- 0.017 240 15.0 7.5 2.4 1/ L and D dimensions are bare case dimensions (See figure 1). 2/ The complete dash number will include the applicable letter completing the FR level symbol (
31、M, P, R, or S). 3/ This is the ambient case temperature prior to the application of current. 4/ 400V PINs with values less than 0.033 F (dash numbers -3103 through -3222) are no longer available. MIL-PRF-83421/2D3Provided by IHSNot for ResaleNo reproduction or networking permitted without license fr
32、om IHS-,-,-MIL-PRF-83421/2D 4 REQUIREMENTS: Dimensions and configuration: See figure 1 and table I. Dielectric: Normally polypropylene, metallized. Case material: Nonmagnetic (end seal may be of magnetic material). Leads: Type designation in accordance with MIL-STD-1276. L W .040 C 32 N Capacitance
33、value: See table I. Capacitance tolerance: See table I. DC rated voltage: 100 V dc, 200 V dc, and 400 V dc. Operating temperature range: -55C to +105C. AC current ratings: See table I. Failure rate (FR) levels (%/1000 hours): M (1.0), P (0.1), R (0.01), and S (0.001). Thermal shock: 10 cycles, metho
34、d 107 of MIL-STD-202, -65C, +105C. Seal: Method 112 of MIL-STD-202, test condition C, procedure IIIa with the following exceptions and details: Bomb pressure of 45 5 lbf/in2(gage). Exposure time: 1 hour +1, -0 hour. Dwell time: 1 hour maximum. Reject limit: R1= 1 X 10-6atm cm3/s. Upon completion of
35、test condition C, perform either test condition A at +100C or test condition B with mineral oil at +100C. Dielectric withstanding voltage (DWV): Method 301 of MIL-STD-202, terminal to terminal. AC: 100 Hz 10 Hz square wave, peak-to-peak voltage, three times dc rated voltage for 60 to 90 seconds, not
36、 to exceed 800 V p/p (see figure 2). DC: 200 percent of dc rated voltage for 60 seconds minimum. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-83421/2D 5 FIGURE 2. Waveform characteristics. Insulation resistance (IR): Method 302 of MIL-STD-
37、202. Charge to rated voltage, +105C for 5 minutes maximum; however, for capacitance values greater than 1.0 F, an additional 1 minute per F is permitted. Terminal to terminal: See table II. TABLE II. Insulation resistance versus capacitance value. Temperature Capacitance Minimum insulation resistanc
38、e (terminal to terminal) +25C 0F to .1F 3,000,000 megohms Greater than .1F 300,000 megohm-microfarads +85C 0F to .1F 150,000 megohms Greater than .1F 15,000 megohm-microfarads +105C 0F to .1F 20,000 megohms Greater than .1F 2,000 megohm-microfarads Dissipation factor (DF): 0.07 percent maximum. Baro
39、metric pressure (reduced): Method 105 of MIL-STD-202, condition D (100,000 feet). 125 percent of dc rated voltage applied. See MIL-PRF-83421 for voltage limitations. Vibration, random (optional): In accordance with MIL-PRF-83421 when ordered with “-“ replaced with “H“ in the PIN. AC burn-in: 40 kHz
40、for 24 hours 8 hours at rms current as specified in table I at +85C. Dielectric absorption: 0.1 percent maximum. Immersion: Method 104 of MIL-STD-202, test condition C. DWV: Insulating sleeves: Greater than 4,000 volts, dc. Terminal to terminal: 200 percent of dc rated voltage. Terminals to case: 20
41、0 percent of dc rated voltage. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-83421/2D 6 IR: Insulating sleeves: 10,000 megohms, minimum. Terminal to terminal: Not less than 50 percent of initial requirement. Terminal to case: 5,000 megohms,
42、 minimum. C: Maximum of 0.25 percent. DF: 0.15 percent. Moisture resistance: Method 106 of MIL-STD-202. DWV, IR, C, and DF: Same as for immersion. Low temperature life: In accordance with MIL-PRF-83421, except measurements shall be made at the following temperatures: t1 = +25C: Record initial capaci
43、tance, dissipation factor, and insulation resistance. t2 = - 65C: 48 hours rated dc voltage applied. t3 = Maximum operating temperature: Two hours rated dc voltage applied (allow for derating). t4 = +25C: Record capacitance, dissipation factor, and insulation resistance. Limits of change shall be as
44、 specified in table III. TABLE III. Post measurement limits. Resistance to soldering heat: Method 210 of MIL-STD-202, condition B. C: Maximum of 0.25 percent. Temperature coefficient: In accordance with MIL-PRF-83421. Capacitance shall be measured at the temperatures specified in table IV. t1 to t4
45、Styles CRH11 through CRH13 Capacitance 0.5% Dissipation factor 0.15% maximum Insulation resistance Within initial requirements Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-83421/2D 7 TABLE IV. Temperature coefficient. 1/ t1 = +25C 3C t2 =
46、+105C 3C t3 = +25C 3C t4 = -55C +0C, -3C t5 = +25C 3CDC life (at +105C): Method 108 of MIL-STD-202. Accelerated condition: 140 percent of dc rated voltage. Rated condition: 100 percent of dc rated voltage. IR: Terminal to terminal: Not less than 33.3 percent of initial requirement. Terminals to case
47、: 5,000 megohms, minimum. C: Maximum of 2.0 percent. DF (at +25C) after life: Maximum of 0.25 percent. AC conditioning: In accordance with MIL-PRF-83421 with the following exceptions: The ac performance shall be at the rated ac ripple current at +85C, 40 kHz for 250 hours, +40, -0 hours (see table V
48、). TABLE V. AC test samples. Qualification: Four each of the highest and lowest capacitance values in each voltage group (see table V). Group B: 15 units shall be selected which are representative of capacitor ratings produced during the current productions period on a semi-annual basis and shall be
49、 representative of ratings manufactured during the period (see table V). Temperature 1/ Styles CRH11 through CRH13 t3 to t2 0 to -4% t3 to t4 0 to +3% t3 to t1 ort5 .25% DC rated voltage (volts) Sample size Capacitance range for selection of sample (F) Qualification group B 100 .47 F - 4 20.0 F - 4 15 .47 to 20.0 200 .18 F - 4
