DL T 5112-2009 Construction specification for hydraulic roller compacted concrete《水工碾压混凝土施工规范》.pdf

相关资源

DL T 880-2021 带电作业用导线软质遮蔽罩.pdf

DL T 887-2024 杆塔工频接地电阻测量方法.pdf

DL T 939-2024 火力发电厂锅炉受热面管监督技术标准.pdf

DL T 647-2024 电站锅炉压力容器检验规程.pdf

DL T 822-2024 水电厂计算机监控系统试验验收规程.pdf

DL T 838-2024 燃煤火力发电企业设备检修导则.pdf

DL T 849.4-2024 电力设备专用测试仪器通用技术条件 第4部分：超低频高压发生器.pdf

DL T 683-2024 电力金具型号命名方法.pdf

DL T 824-2023 汽轮机电液调节系统性能验收导则.pdf

DL T 895-2024 除灰除渣系统运行导则.pdf

猜你喜欢

BS ISO 10896-6-2015 Rough-terrain trucks Safety requirements and verification Tilting operator-s cabs《崎岖地形卡车 安全要求和验证 可倾驾驶室》.pdf

BS ISO 10896-7-2016 Rough-terrain trucks Safety requirements and verification Longitudinal load moment systems《崎岖地形卡车 安全要求和验证 纵向载荷力矩系统》.pdf

BS ISO 10897-2016 Collets for tool holders with taper ratio 1 10 Collets holders nuts《锥度比为1 10的刀架夹头 夹头、刀架和螺母》.pdf

BS ISO 10898-2016 Spot drills《定心钻》.pdf

BS ISO 10904-2011 Fibre-cement corrugated sheets and fittings for roofing and cladding《屋顶和覆盖层纤维水泥波纹板及其配件》.pdf

BS ISO 10907-1-2008 Tools for moulding - Locating rings - Locating rings for mounting without thermal insulating sheets in small or medium moulds (types A and B)《模具 定位环 小型或中型模具内无绝热.pdf

BS ISO 10907-2-2007 Tools for moulding Locating rings Locating rings for mounting with thermal insulating sheets in small or medium moulds (types C and D)《铸模工具 定位环状物 小型或中型模具中安装有隔热板.pdf

BS ISO 10911-2017 Solid hardmetal end mills with cylindrical shank Dimensions《带圆柱形柄的实心硬质球端立铣刀 尺寸》.pdf

BS ISO 10914-1998 Assembly tools for screws and nuts - Sockets and wrenches for spline drive《螺钉和螺母用安装工具 开键槽用套管扳手》.pdf