1、INCH-POUNDMS24695A 14 July 2005 SUPERSEDING MS24695 13 October 1960 DETAIL SPECIFICATION SHEET SPRING LOADED MOUNTING ASSEMBLY, CONNECTOR, RACK AND PANEL, MINIATURE Inactive for new design after 8 June 1999. This specification is approved for use by all Departments and Agencies of the Department of
2、Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-26518. The Qualified Products List (QPL) associated with this inactive for new design specification will be maintained until acquisition of the product is no longer required, wh
3、ere upon the specification and QPL will be canceled. A (spring) MS24697 MS pin 1/ Approximate free length Spring dash number MS24695-1 .755 (19.18 mm) -1 MS24695-2 .875 (22.23 mm) -2 MS24695-3 .945 (24.00 mm) -3 1/ Part identifying number (PIN) FIGURE 1. Spring loaded mounting assembly. AMSC N/A FSC
4、 5935 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS24695A 2 REQUIREMENTS: Spring loaded mounting assembly and configurations see figure 1. Part or identifying number (PIN): MS24695 dash number from figure 1. Referenced documents: In addition to
5、MIL-DTL-26518 this document references the following: MS24696 MS24697 MS24698 MS24699 NASM16562 Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. CONCLUDING MATERIAL Custodians: Prepa
6、ring activity: Air Force - 11 DLA - CC DLA - CC (Project 5935-4703-000) Review activities: DLA - IS NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
