DLA MS27633 REV B-2009 ELBOW SUB ASSEMBLY FLARELESS 45 DEGREES SWIVEL NUT.pdf

上传人:bowdiet140 文档编号:696832 上传时间:2019-01-02 格式:PDF 页数:3 大小:38.32KB
下载 相关 举报
DLA MS27633 REV B-2009 ELBOW SUB ASSEMBLY FLARELESS 45 DEGREES SWIVEL NUT.pdf_第1页
第1页 / 共3页
DLA MS27633 REV B-2009 ELBOW SUB ASSEMBLY FLARELESS 45 DEGREES SWIVEL NUT.pdf_第2页
第2页 / 共3页
DLA MS27633 REV B-2009 ELBOW SUB ASSEMBLY FLARELESS 45 DEGREES SWIVEL NUT.pdf_第3页
第3页 / 共3页
亲,该文档总共3页,全部预览完了,如果喜欢就下载吧!
资源描述

1、 MS27633B 22 October 2009 SUPERSEDING MS27633A 29 September 2000 DETAIL SPECIFICATION SHEET ELBOW SUB ASSEMBLY, FLARELESS, 45, SWIVEL NUT This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein s

2、hall consist of this specification sheet and MIL-DTL-83296. FIGURE 1. Flareless, 45, elbow sub assembly. AMSC N/A FSC 4730 INCH-POUND Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27633B 2 PIN Union Wire Nipple A inch (mm) B inch (mm) MS27633-4C

3、MS27624-4C MS27625-4C MS27637-4C 1.519 (38.58) .515 (13.08) MS27633-6C MS27624-6C MS27625-6C MS27637-6C 1.840 (46.74) .683 (17.35) MS27633-8C MS27624-8C MS27625-8C MS27637-8C 2.179 (55.35) .761 (19.33) MS27633-10C MS27624-10C MS27625-10C MS27637-10C 1.824 (46.33) .756 (19.20) NOTES: 1. Dimensions ar

4、e in inches. 2. Metric equivalents are given for information only. 3. Dimensioning and tolerancing are in accordance with ASME Y14.5M. 4. Any design of adapter component to the left of plane A-A is acceptable provided that dimensions A and B meet the requirements and notes of this specification shee

5、t, and the requirements of MIL-DTL-83296 are met. FIGURE 1. Flareless, 45, elbow sub assembly - Continued. REQUIREMENTS: Dimensions and configurations: The design, construction, and physical dimensions shall be in accordance with MIL-DTL-83296 and figure 1, in case of conflict between this specifica

6、tion sheet and MIL-DTL-83296, this specification sheet shall govern. This part for use with MIL-DTL-83298 hose and hose assemblies in accordance with MIL-DTL-32330. Material: Material shall be corrosion resistant steel (CRES). Sizes -4 thru -8 shall have a forged design (tolerance .020 (0.51 mm). Si

7、ze -10 shall have a bent tube design (tolerance .035 (0.89 mm). Finish: Finish shall be passivated in accordance with MIL-DTL-83296. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27633B 3 PIN example: MS27633 -4 C PIN example: MS27633-4C indicate

8、s a 45 elbow sub-assembly 1/4 inch, CRES. Changes from previous issue. Marginal notations are not used in this revision to identify changes due to the extent of the changes. Referenced documents. In addition to MIL-DTL-83296, this document references the following: MIL-DTL-32330 MIL-DTL-83298 ASME Y

9、14.5M SAE-AS33514 CONCLUDING MATERIAL Custodians: Preparing activity: Army - AV DLA - CC Navy - AS Air Force - 99 (Project 4730-2008-063) DLA - CC Review activities: Navy - MC, SA Air Force - 71 NOTE: The activities listed above were interested in this document as of the date of this document. Since

10、 organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Specification sheet number Dash size (see figure 1) Material (C for CRES) MS prefix Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-

展开阅读全文
相关资源
猜你喜欢
相关搜索

当前位置:首页 > 标准规范 > 国际标准 > 其他

copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1